Турбогенераторы паровые с противодавлением

Б/у паровой турбогенератор мощностью 4 МВт, производства Калужского завода. 40/3, 450*С, 50 Гц.

Код #ZS60234

Б/у противодавленческий турбогенератор GENERAL ELECTRIC, мощность 20700кВт

Код #ZG60772

б/у турбогенератор с противодавлением мощностью 10 000 кВт, на входе 60 атм, двойная экстракция 14 атм и 4 атм

Код #ZW62459

Б/у электростанция мощностью 12500 кВт, производительностью по пару 63 тоны/час, 480*C, 63 атм.

Код #AS61917

Тупбогенератор с противодавлением производства КТЗ тип П6-3,4/0,5-1 6000 кВт

Код #AS60935

6250 kW 600/95 PSI General Electric Steam Turbine

Код #ZG60417

2000 kW Belliss Turbogenerator Set

Код #AG61842-01

11000 kW 715/200 PSI Turbodyne Non-Condensing Steam Turbine

Код #ZG60222

5000 kW 395/45 PSI General Electric Non-Condensing Turbogenerator

Код #ZS54894

12000 kW 510/75 PSI Kaluga Steam Turbine Plant

Код #ZS61313

10000 kW 42/6 Bar Steam Turbine/Generator

Код #ZS60722K

2000 kW 348 PSI Atlas Dual Turbine

Код #ZS60722F

2000 kW 348 PSI Atlas Dual Turbine

Код #ZS60722F

Used Atlas model C-700TE dual turbine. New in 1986. Maintenance in 2008. Turbine with the gearbox is connected with coupling to generator, the generator is coupled with the turbine on a steel frame. Single-stage steam turbine with an integrated gearbox. Self turbine stage is attached to the gearbox with one high-speed pinion on which is mounted the turbine impeller with two-stage axial blading type C. The cabinet is mounted on transmission. Bearing lubrication gear is protected from the oil system generator. The nominal parameters of the turbine Atlas C - 700 TE required quality of steam according to CSN 07 7401 allowable increase in pressure and temperature on a quick valve according to EN 60045-1 rated parameters steam parameters * input 2.4 [MPa ABS.] 350 [° C] output 0.25 [MPa ABS.] 210 [° C] rpm 6000/3000 [min-1] steam consumption, performance steam flow 30 [t.h-1] rated power 2000 kW generator rated voltage: 3 kV x 6300 EL. Performance in 2500 [kW] at the terminals of electrical generator regulation turbine operation ensures by electronic regulator tr 101 and electro-hydraulic oil, low pressure unit Voith. By oil pressure unit is controlled regulatory quick-closing valve. Turbine regulation allows these types of operation: -speed control maintains the desired speed during turbine start-up, before connecting the generator to the electric net, during the controlled shutdown after disconnecting the generator. -Backpressure-regulation the control works only when running the generator sets connected to the electric net. Flow steam turbine is determined by immediate collection of steam appliances and electric power corresponds to this flow (which made electrical power should be used). Pressure regulators maintain a constant (adjustable) backpressure. Oil management oil management for lubrication of bearings and gearwheels of transmission: - main gear driven oil pump which supplies pressurized oil for lubrication of turbines in operation (gear). Approach-electric oil pump - emergency oil pump driven by an electric motor for supplying pressure oil for lubrication and cooling of bearings at full power failure (power supply from an Independent source such as ups). Oil-tank has a volume of about 400 liters. For lubrication can be used turbine oil TB-46 or equivalent, complying with IEC 65 6620. -oil cooler (2 x plate L25 GG 60) to aggressive cooling water. Flow of water max 20 ° C is about 8.4 +5.2 t.h-1, the cooler pressure loss is about 35 KPA warming water of 8 ° C. Required cooling water overpressure is 0.6 MPa. For cooling is considered chemically treated water: content of mechanical particles max ............ 50 mg.l-1 PH ................................................. ...... 7 ч 8.3 hardness ................................................. .. 4 to 7 mg eq. Content of impurities ............................. 700 to 1000 mg.l-1 it is recommended to insert to the water circuit coke filter -two oil filters - each containing: 6x insert CFO 11942 25 microns.

Размещение: Недоступно

В корзину Подробнее

2000 kW 24/2.5 Bar Atlas Dual Back Pressure Turbine

Код #ZS60714

2000 kW 24/2.5 Bar Atlas Dual Back Pressure Turbine

Код #ZS60714

Used 2000 kW Atlas dual back pressure turbine C - 700 TE with the gearbox connected with coupling to a Skoda 1994 generator. The generator is coupled with the turbine on a steel frame. Single-stage steam turbine with an integrated gearbox. Self turbine stage is attached to the gearbox with one high-speed pinion on which is mounted the turbine impeller with two-stage axial blading type C. The cabinet is mounted on transmission. Bearing lubrication gear is protected from the oil system generator. Rated parameters steam parameters * input 2.4 [MPA ABS.] 350 [° C] output 0.25 [MPA ABS.] 210 [° C] rpm 6000/3000 [min-1] steam consumption, performance steam flow 30 [T.H-1] rated power 2000 kW generator rated voltage:6300V, 3 phase EL. Performance in 2500 [kW] at the terminals of electrical generator regulation turbine operation ensures by electronic regulator tr 101 and Electro-hydraulic oil, low pressure unit Voith. By oil pressure unit is controlled regulatory quick-closing valve. Turbine regulation allows these types of operation: -speed control maintains the desired speed during turbine start-up, before connecting the generator to the electric net, during the controlled shutdown after disconnecting the generator. -backpressure-regulation the control works only when running the generator sets connected to the electric net. Flow steam turbine is determined by immediate collection of steam appliances and electric power corresponds to this flow (which made electrical power should be used). Pressure regulators maintain a constant (adjustable) backpressure. - oil management for lubrication of bearings and gearwheels of transmission: - main gear driven oil pump which supplies pressurized oil for lubrication of turbines in operation (gear). Approach-electric oil pump - emergency oil pump driven by an electric motor for supplying pressure oil for lubrication and cooling of bearings at full power failure (power supply from an Independent source such as ups). Oil-tank has a volume of about 400 liters. For lubrication can be used turbine oil TB-46 or equivalent, complying with IEC 65 6620. -oil cooler (2 X plate L25 GG 60) to aggressive cooling water. Flow of water max 20 ° C is about 8.4 +5.2 T.H-1, the cooler pressure loss is about 35 KPA warming water of 8 ° C. Required cooling water over pressure of 0.6 MPA. For cooling is considered chemically treated water: content of mechanical particles max ............ 50 mg.L-1 PH ................................................. ...... 7 ÷ 8.3 hardness ................................................. .. 4 to 7 mg EQ. Content of impurities ............................. 700 to 1000 mg.L-1 it is recommended to insert to the water circuit coke filter -two oil filters - each containing: 6X insert CFO 11942 25 microns.

Размещение: EUROPE

В корзину Подробнее