Екструзійні лінії (плівка)

8" Wide Wayne Horizontal Cast Film Extrusion Line

Код #820-86

80" Wide Egan Co-Extrusion Cast Film Line

Код #ZP61362-1

130" Wide BOPS Davis Standard/Marshall & Williams Cast Film Production Plant

Код #ZP62650

130" Wide BOPS Davis Standard/Marshall & Williams Cast Film Production Plant

Код #ZP62650

Used BOPS Davis Standard/Marshall & Williams cast film production plant. Still installed as operated producing 14,000 tons per year. Maximum film width 3,270mm (128.7"), maximum thickness range 130-650 micron (5.1-25 mil). Fractioned film width range 270 to 1000mm (10.6"-39.4"). Finished film max 3.3m (130")maximum 2.0m (80") minimum Line output 3780 lb/hr finished product estimate 8% edge trim. Plant was new in 1999 and shut down March of 2018. Main equipment installed in the plant is as follows: 8" 36/1 L/D Davis Standard single screw extruder, driven by 700HP motor with vented barrel and including continuous belt screen changer and Maag melt pump. Max output 4200 lb/hr. 60" wide EDI Autoflex, Fast gap die with restrictor bar and 6" deckling each side available. 64" Marshall & Williams three roll stack with 18" OD, individual driven rolls 64" Marshall & Williams MDO (Machine Direction Orientor) including its heat transfer system Marshall & Williams TDO (Transversal Direction Orientor) with gas fired oven. Material inlet width 30-60", material outlet width 90"-140" 5-100 fpm slow side/15-300 fpm fast side. Stretch ratio: MDO 1:1 - 3:1 TDO 1.5:1 - 4.6:1 Surface corona treating station Approximately 130" wide coating station for application of silicon and anti-fog formula, dryer/heater. Approximately 130" wide primary turret winder 130" John Dusenbery duplex slitter with AC motor driven individual, multi station rewind arms with center/surface assited rewinding. Maximum 40" OD rolls Cumberland 18" x 36" edge trim granulator with nip roll feed. 60HP primary motor and blower discharge. Roll packaging station, scale and labeling machine MCC control system, speed and frequency variators, cooling towers and silos Conair "Compu Dry" desiccant dryer Silo storage farm and pneumatic conveying system. All equipment still installed as operated. Previously used on general purpose styrene, high impact polystyrene and BOPS (Bi Oriented Polystyrene) in transparent, black, white, brown etc. colors

Місцезнаходження: South America

У кошик Детальніше

59" Wide (1500mm) Nacchi Co-Ex Cast Film Line

Код #ZP62634

125" Wide (320mm) Battenfeld-Gloucester Multi-Layer Cast Film Line

Код #ZP61767

120" Wide Cincinnati Cast Film Casting Section/Embosser

Код #ZP45766

8" Wide Killion Laboratory Cast Unit

Код #7491-1

212" Wide Toshiba BOPP Film Manufacturing Plant

Код #ZP61671

116" Wide Black Clawson Film Cast Embossed Station

Код #8009-01

65" Wide Cast Film Type Take-Off

Код #1566-9

45" Wide Marshall & Williams BOPP 3-Roll Casting Station

Код #9191

88" Welex Cast Station Only

Код #20490-2

54" Wide Black Clawson Extrusion Coating Station

Код #20636-6

(2) 86" Wide Cast Film Extrusion Lines

Код #ZP63591

112" (3 Meter) Wide Finished 5-Layer Cast Film Extrusion Line (Less Extruders)

Код #21735-01

112" (3 Meter) Wide Finished 5-Layer Cast Film Extrusion Line (Less Extruders)

Код #21735-01

Used Reifenhauser 3 Meter Wide (112" Finished) 5-Layer Cast Film Extrusion Line (less extruders). New 2011. Package previously used for EVA, ULDPE, LLDPE, LDPE, with a majority of the product last run on the PP. Also HP423, PRO-FAX6331, PRO-FAX8523, RP323. Line was originally equipped with (4) extruders, 180mm, 100mm, 100mm, 60mm. Maximum wind speed 350 meters per minute. The die is a 3,100mm (122") wide coat hanger shaped cavity with adjustable thermal bolts compatible with automatic lip adjusting systems. 3,100mm wide casting cart with cooling rolls, (2) adjustable cleaning rolls, edge trimming station, air knife blower and control. Also includes vacuum box installed on the winder with vacuum box blower and controls. Also included are (3) different texture cast rolls, a heavy texture, light texture and double polish. Winder is 112" finish width up to 32" o.d. with 6" core. Max roll weight for 3" shaft approximately 1200 lbs. 6" core has no weight limit, just 32" diameter. Includes (3) 6" cores, (4) 3" shafts. Has blade holders for inline slitting up to 14 cut positions. Also included is cart and shaft puller. Feed block is a 5-layer REICO Feed, feed block with adjustable finger profilers for layer control and junction box/channel pack section. Includes (3) different channel packs the most common used is B-D-A-D-C. Also asymetrical A-A-B-D-C and B-C-A-C-D.

Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)

У кошик Детальніше