4.5" HPM 30/1 L/D Vented Plugged Extruder
Код #21197-1
Used 4.5” HPM Single Screw Extruder
30/1 L/D
Model: TMIII
Serial: 95070
Year: 1995
Barrel: vented (plugged), electrically heated, water cooled
6" x 6" top center feed throat
Driven by a 250 hp DC motor, 460 volt AC input and a Powertec motor control with 460 volt 50/60 Hz AC input. Gearbox: Lufkin gear reducer, 13.9:1 gear ratio, model DV235E-811, serial 10440, rated at 510 hp with 2.55 application factor and 200 hp application power. Additional information: includes temperature control panel, includes (2) screws (1 may be a 2-stage) and screw pusher, gearbox heat exchanger for cooling (no pump). Last running ABS.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
4.5" 30/1 L/D Extruder With Electrically Heated Air Cooled Barrel
Код #21764-214
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-121, continuous style screen changer with Hyd. pump, 42" air cooled centerline barrel height and temperature control panel but without temperature controllers. Driven by 150 hp DC motor with SCR control.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
4.5" 30/1 L/D Extruder With Electrically Heated Air Cooled Barrel
Код #21764-211
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M-3315, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-121, continuous style screen changer with Hyd. pump, 42" air cooled centerline barrel height and temperature control panel but without temperature controllers. Driven by 150 hp DC motor with SCR control.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
5.11 30/1 L/D Non-Vented Extruder 250 HP DC Motor
Код #21764-181
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continuous screen changer but without Hyd pump. Gearbox is Serial #U7644, SO #58491, rated at 365 hp with 1.5" service factor, 17.49/1 gear ratio. New 7/1997. 42" barrel centerline height.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
4.5" 30/1 L/D Extruder With Electrically Heated Air Cooled Barrel
Код #21764-180
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.38/1 gear ratio rated at 321 hp. Serial #L3206, SO #03643. New 1/1991. Includes Kryenborg Type K-SWE-121, continuous style screen changer with Hyd. pumpo, 42" air cooled centerline barrel height and heat only temperature control panel with temperature controllers. Driven by 150 hp DC motor with SCR control.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
5.11 30/1 L/D Non-Vented Extruder 250 HP DC Motor
Код #21764-179
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continuous screen changer with Hyd pump. Gearbox is Serial #14844, SO #70693, rated at 365 hp with 1.5" service factor, 17.49/1 gear ratio. New 12/2000. 42" barrel centerline height.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
