10 HP 8" X 16" Wortex Model FL816 Granulator
Код #4758-235A
Used Wortex model FL816 granulator. Approximately 10 HP drive. 8" X 16" feed. Reported 3/8" screen opening. New 1976. Serial #1-100-429.
Размещение: Midwest USA
В корзину
Подробнее
5 HP 8" X 8" Polymer Systems Model HM-W88 Hot Melt Granulator
Код #M2813J-006
Used Polymer Systems hot melt Granulator. Model HM-W88, Serial #HMGW881829. Has an 8" X 8" throat opening with a 2-knife open rotor. Granulator has a 2-1/2" X 8" top feed opening and a jacketed cutting chamber. Driven by a 5 HP motor, 460/3/60, 6.6 amps. Grinder is a low profile type mounted on casters and is set up for an air veyor discharge. Unit has approximately 5/16" screen, motor starters and operator controls.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
7 HP 8" X 10" Ball & Jewell Model HD-810-4 Portable Granulator
Код #8488-9
Used Ball & Jewell portable Granulator. Model MD-810-X, Serial #5489-92469. Has an 8" X 10" throat opening. Includes tray feed hopper and profile chute. Three knife open rotor is belt driven by a 7.5 HP motor, 460/3/60. Bin discharge.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
20 HP 12" X 10" Vertical Cutter
Код #U2025-1
Used vertical cutter for plastics, polish made. Machine has inlet with dimensions 315 mm x 260 mm and is driven by electric motor 15 kW. Milling chamber has diameter 450 mm and height 120 mm. Rotor has 3 bolted knives. There are 5 static knives mounted on walls of milling chamber. Includes cyclone and control panel.
Размещение: Perry Poland Warehouse
В корзину
Подробнее
20 HP 12" X 48" Ball & Jewell Model LT-1248 Granulator
Код #ZP60555-2
Used Ball & Jewell Model LT-1248 Granulator with feed rolls. Has 12" X 48" feed throat opening with 3-knife open rotor and 2 bed knives. Driven by dual 10 HP motors, 230/460 volt, 1170 rpm. Has 7.5" X 47" feed rolls. Includes motor starter and granulator controls with interlocked 5 HP blower starter.
Размещение: Midwest USA
В корзину
Подробнее
10 HP 2" X 30" Wortex Under-the-Press Granulator
Код #20232-65
Used 30" wide Wortex under-the-press granulator equipped with approximately 10 HP motor. Package includes paddle/pull roll assembly, low veyor grinder base for ease of installing under thermoformer trim press.
Размещение: West Coast USA
В корзину
Подробнее
10 HP 2" X 30" Wortex Under-the-Press Granulator
Код #20232-67
Used 30" wide Wortex under-the-press granulator equipped with approximately 10 HP motor. Package includes paddle/pull roll assembly, low veyor grinder base for ease of installing under thermoformer trim press.
Размещение: West Coast USA
В корзину
Подробнее
5 HP 7" X 10" Mecanofil Cutter
Код #U2085-10
Used carbon steel cutter for plastics made by Mecanofil (Spain) with feeder screw conveyor. Screw feeder conveyor driven by 0,55 kW motor via bevel gearbox. Grinding chamber dimnesions: length 250 mm x diameter 170 mm. Has 2 static blades and screen perforation 6 mm. Rotor with 4 blades is driven by belt gearbox and elec. Motor 4 kW. Mounted on carbon steel frame. Includes control panel. Shipping dimensions: width 1200 mm x depth 1800 mm, height 1900 mm. No documentation. Weight: 720 kg. New 1999. No technical documentation.
Размещение: Perry Poland Warehouse
В корзину
Подробнее
15 HP 12" X 16" Pre-Crusher
Код #U2143-9
Used vertical pre-crusher for plastics. Polish made. Machine has a milling chamber with internal diameter 500 mm. At the bottom of milling chamber there is a rotor with two blades. Rotor is belt driven by electric motor 11 kW, 1460 rpm, 380 V, 50 HZ. Top feeding inlet with dimensions 300 mm x 400 mm and bottom side discharge through the screen. Mounted on integrated pedestal.
Размещение: PL
В корзину
Подробнее
5 HP 10" X 5" Plastic Cutter
Код #U2143-14
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 Hz, 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Bottom side discharge. Dimensions: 800 mm x 400 mm x 950 mm.
Размещение: Perry Poland Warehouse
В корзину
Подробнее
10 HP 12" X 7" Plastic Cutter
Код #U2143-13
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 7,5 kW. Inlet dimensions: width 300 mm x 180 mm height. Rotor has 3 knives. On milling chamber walls are mounted 4 static knives. Milling chamber dimensions: diameter 290 x height 120 mm. Bottom side discharge. Mounted on tripod. Dimensions: 900 mm x 700 mm x 1150 mm.
Размещение: Perry Poland Warehouse
В корзину
Подробнее
5 HP 10" X 5" Plastic Cutter
Код #U2094-3
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 Hz, 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Bottom side discharge. Dimensions: 800x400x950 mm.
Размещение: Perry Poland Warehouse
В корзину
Подробнее
1 HP Precision Air Conveyance Corp. Model 78FSP Inline Film Chopper
Код #ZP60836
Used Precision Air Conveyance Corp. Model 78FSP inline film chopper. S/N PQ-9534F. Equipped with 2 knife open rotor, 1 bed knife, 4" diameter inlet and outlet. 1 HP, 115/230/460 volt, 1725 rpm motor. Includes inlet muffler box and disconnect switch. Mounted on caster plate base.
Размещение: Midwest USA
В корзину
Подробнее
15 HP 14" X 20" Cumberland Model 584 Granulator
Код #20351-2
Used Cumberland model 584 granulator, S/N 335000-7670, 14" X 20" feed throat, 3 knife slant cut open rotor, 2 bed knife, approximate 15 HP 460 volt motor, insulated tray feed hopper with rear mounted 14.5" trumpet feed roll in-feed, smooth steel feed rolls are 2.5" diameter X 15.75" long in off-set position and are pneumatically actuated, feed rolls are powered by a 2 HP 460 volt 1725 rpm motor thru 30:1 Boston gearbox and is controlled by a Baldor a/C variable speed drive unit, 6" left hand airveyor discharge, on casters, includes starter and controls, 3/16" screen installed, 1976 model year.
Размещение: Midwest USA
В корзину
Подробнее
10 HP 7" X 36" Conair Wortex Model UP-755 Under-the-Press Granulator
Код #20701-26
Used Conair Wortex Under-The-Press granulator Model UP-755, carbon steel.
Approximate trough-put up to 1000 pounds per hour (depending on type of materisl)
(4) 30" wide bolt-on blades, (2) bed knoves.
Star roll design infeed driven by a 1 hp 3/60/230 volt motor.
Tilt back hopper, approxiamately 7" x 36".
Includes 3/8" diameter discharge screen.
Driven by a 10 hp 3/60/230 volt motor
Set up for airveyor discharge.
Blower size WB1212, driven by 3 hp 3/60/230/460 volt, 3495 rpm motor.
Serial #P2875. New 1987.
Размещение: Midwest USA
В корзину
Подробнее
10 HP 10" X 12" Cumberland Model 284 Granulator
Код #20814-13
Used Cumberland Granulator. Model 284, Serial #325525-80214. New 1980. Has 10" x 12" feed throat opening. Has 3-knife open rotor. Driven by an approximately 10 HP motor, 460/3/60. Includes tray feed hopper auxiliary nip roll assembly.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
20 HP 10" X 18" Rapid Model 1018-K Granulator
Код #20815
Used Rapid granulator Model 1018-K. Has 3 knife, scissors cut, open rotor & 3/8" discharge screen. Includes collection bin for ground material. No blower included. Grinder is driven by a 20 HP motor, 230/460 volt. Has 10" X 18" feed opening with tray feed hopper included. Grinder serial #300-1240. New 1997.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
20 HP RML Commander Model TS1-SH-16-316-20 Scrap Grinder
Код #20724-5
Used RML Commander scrap grinder, model TS1-SH-16-316-20. Staggered blade rotor. Driven by a 20 HP 3/60/575 volt, 1170 rpm motor. Set up for blower discharge. Includes 5 HP blower. Mounted on a carbon steel frame.
Размещение: Midwest USA
В корзину
Подробнее
7 HP 8" X 12" Kamas Industri AB Type K-Kyarn Cutting Mill
Код #U2233-4
Used cutting mill by Kamas Industri AB (Sweden) type K-Kyarn, belt driven by electric motor 5.5 kW, 1425 rpm, 380 V, 50 hertz. Mill has inlet dimensions 210 mm x 310 mm. Central bottom discharge. Mill is equipped with feeding hopper. Machine is mounted on stainless steel mobile frame and is equipped with local control panel.
Размещение: PL
В корзину
Подробнее
7.3 HP Dreher Type S 26/41 GFS-RS Granulator
Код #RG9497
Used Dreher type S 26/41 GFS-RS granulator. Rotor width 410mm, rotor diameter 260mm, open rotor, number of rotor knives: 3, number of stator knives: 2, with hopper, hinged top, motor 5,5 kW, 380 volt, with roll feeding, motor 0,75 kW, 220/380 volt, with variable speed drive, with fan, mounted in sound absorbing box, with switchgear.
Размещение: EU
В корзину
Подробнее
20 HP 14" x 16" Nelmor Granulator
Код #820-257
Used Nelmor Granulator. Serial #30280. Has 14" x 16" feed opening with 3 knife open rotor. Driven by an approximately 20 hp motor, 460/3/60. Has blower discharge. Includes operator control panel and edge trim receiver for installation on top of a standard tray feed hopper.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
10 HP 12" x 9" Process Control Model PC10G0 Edge Trim Film Grinder
Код #820-252
Used Process Control edge trim film Grinder. Model PC10G0, Serial # 1221, new 1980. Has 12" x 9" feed opening. Includes operator control panel Belt driven to 10hp motor, 460/3/60, and with blower discharger. Also includes 80" high hopper for film edge trim collection. No conveyor input blower included but includes discharge conveyor. Includes spare blades.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
1 HP Precision Air Conveyance Model 78FSP Inline Chopper
Код #20636-14
Unused Precision air conveyance model 78FSP inline chopper, serial #001480a. Has 2-knife rotor, (1) bed knife and (2) 3" O.D. Flex lines for trim pickup. Driven by a 1 HP 208-230/460 volt, 1725 rpm motor. New 2000.
Размещение: Midwest USA
В корзину
Подробнее
1 HP Precision Air Conveyance Model 78FSP Inline Chopper
Код #20636-13
Unused Precision air conveyance model 78FSP inline chopper, serial #001480B. Has 2-knife rotor, (1) bed knife and (2) 3" O.D. Flex lines for trim pickup. Driven by a 1 HP 208-230/460 volt, 1725 rpm motor. New 2000.
Размещение: Midwest USA
В корзину
Подробнее
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Код #C9101J-003
Used Nelmor Granulator. Model 810RGII, Serial #23195. New 1985 Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor460/3/60. Unit is factory sound enclosed, and is set up for veyor discharge. Hopper tilts open for quick clean out. With motor starter.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Код #C9101J-002
Used Nelmor Granulator. Model 810RGII, Serial #23190. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is set up for veyor discharge. Hopper tilts open for quick clean out. With motor starter.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
1 HP 4" Model FP-78 Inline Cutter
Код #ZP59345-3
New FP-78 inline cutter. 4" inlet and outlet. 1 HP, (2) rotor knives. (1) bed knife.
Размещение: Midwest USA
В корзину
Подробнее
7 HP 10" X 10" Amacoil Model HMG Granulator
Код #U1903-7
Used Amacoil granulator type HMG having a 254 mm X 254 mm (10"X10") throat opening. Rotor has 4 knives and is driven by 5.5 kW motor. Designed for air veyor discharge, but presently missing chute.
Размещение: Perry Poland Warehouse
В корзину
Подробнее
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Код #C9101J-004
Used Nelmor Granulator. Model 810RGII, Serial #23197. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is set up for veyor discharge. Hopper tilts open for quick clean out.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
15 HP 11" X 14" Foremost Granulator
Код #561-21
Used Foremost plastic granulator having approximately an 11" X 14" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by approximately a 15 HP motor. Pelican type hopper. With motor starter and push buttons.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
15 HP 11" X 14" Foremost Granulator
Код #561-20
Used Foremost plastic granulator having approximately an 11" X 14" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by approximately a 15 HP motor. Pelican type hopper. With motor starter and push buttons.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
15 HP 9" X 12" Mdl 912-C Rapid Grinder
Код #20461-12
Used Rapid Grinder. Model 912-C, Serial #305003. New 1989. Has 9" X 12" feed opening, 4-knife.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
15 HP 9" X 12" Rapid Grinder
Код #20461-11
Used Rapid grinder. 9" X 12". 4-knife. 15 HP.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
15 HP 9" X 12" Rapid Grinder
Код #20461-10
Used Rapid grinder. 9" X 12". 4-knife. 15 HP, 230/460 volts.
Размещение: On Site at Perry (Hainesport, NJ - USA)
В корзину
Подробнее
7.5 HP 10" x 12" Conair Martin Model CFK-1012 Nip Roll Fed Granulator
Код #21049-06
Used Conair Martin Model CFK-1012 nip roll fed granulator. 10" X 12" feed throat, 3-kife open rotor, (2) bed knives, 7.5 hp 460 volt motor. Rear facing insulated tray hopper with front facing feed roll system. Feed rolls are 4.5" diameter x 11" wide face, knurled steel top roll and smooth steel lower roll. Feed rolls are powered by a 300 foot per minute 10:1 air motor at 14.13" per rotation. Granulator and side mounted blower have insulated body panels, 4" O.D. blower outlet. On casters. Complete with starter and controls for the granulator, blower and feed rolls. 5/16" holes screen installed and 1" holes spare screen is included. New 1995.
Размещение: Midwest USA
В корзину
Подробнее
11 kW cutting mill/granulator Dreher type S26/41
Код #U2295-3
Second hand, carbon steel, cutting mill by Dreher Gmbh&Co (Germany) type S26/41. Mill has feeding inlet 41,5 cm x 49 cm. Milling chamber has internal dimensions: width 410 mm x diameter 260 mm. Rotor is belt driven by el. motor 11 kW, 1440 rpm, 380/660 V, 50 hz. Rotor is solid type and is equipped with three knives and is working with rotation about 557 rpm. There are two stationary knives mounted on walls of milling chamber. Below there is installed a screen. Bottom discharge into the rectangular container, mounted under the milling chamber. Mill is equipped with local control panel. Shipping dimensions: width 90 cm x length 120 cm x height 210 cm.
Размещение: PL
В корзину
Подробнее
11 kW cutting mill/granulator Dreher type S26/41
Код #U2295-2
Second hand, carbon steel, cutting mill by Dreher Gmbh&Co (Germany) type S26/41. Mill has feeding inlet 41,5 cm x 49 cm. Milling chamber has internal dimensions: width 410 mm x diameter 260 mm. Rotor is belt driven by el. motor 11 kW, 1440 rpm, 380/660 V, 50 hz. Rotor is solid type and is equipped with three knives and is working with rotation about 557 rpm. There are two stationary knives mounted on walls of milling chamber. Below there is installed a screen. Bottom discharge into the rectangular container, mounted under the milling chamber. Mill is equipped with local control panel. Shipping dimensions: width 90 cm x length 120 cm x height 210 cm.
Размещение: PL
В корзину
Подробнее
11 kW cutting mill/granulator Dreher type S26/41
Код #U2295-1
Second hand, carbon steel, cutting mill by Dreher Gmbh&Co (Germany) type S26/41. Mill has feeding inlet 41,5 cm x 49 cm. Milling chamber has internal dimensions: width 410 mm x diameter 260 mm. Rotor is belt driven by el. motor 11 kW, 1440 rpm, 380/660 V, 50 hz. Rotor is solid type and is equipped with three knives and is working with rotation about 557 rpm. There are two stationary knives mounted on walls of milling chamber. Below there is installed a screen. Bottom discharge into the rectangular container, mounted under the milling chamber. Mill is equipped with local control panel. Shipping dimensions: width 90 cm x length 120 cm x height 210 cm.
Размещение: PL
В корзину
Подробнее
2.2 kW vertical cutting mill Rapid 2
Код #U2294-13
Used vertical cutting mill polish made, type Rapid 2. Mill is directly driven by el. motor 2.2 kW, 1410 rpm, 380 V, 50 hz. Milling chamber has internal diameter 200 mm. Rotor has width 100 mm and is equipped with two bolted knives. There are also installed two stationary knives bolted to the walls of milling chamber. Inlet dimensions: 190 mm x 90 mm. Side bottom discharge. Shipping dimensions: 40 cm x 30 cm x 80 cm H.
Размещение: PL
В корзину
Подробнее
4 KW horizontal knife mill Metalchem type NTP-4
Код #U2294-12
Used carbon steel horizontal knife mill by Metalchem (PL) type NTP-4. Milling chamber has internal dimensions: 220 mm x 180 mm. Rotor has diameter 160 mm x length 200 mm and is equipped with 6 bolted knives. Driven directly by el. motor 4 kW, 1430 rpm, 380 V, 50 hz. Feeding inlet has dimensions 250 mm x 170 mm. Bottom discharge through the screen into the blowing fan, which is transporting final material through 90 mm discharge pipe. Mill is mounted on carbon steel supporting frame. Shipping dimensions: 120 cm x 80 cm x 120 cm H.
Размещение: PL
В корзину
Подробнее
