5" X 7" Alexanderwerk Line For Compacting Powders
Код #U2064
Used line for compacting powders by Alexanderwerk (Germany). Line consists of:
- feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter.
- horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm.
- granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm.
- intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm.
- roll compactor Alexanderwerk model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up to 20 tons (186 bar). Maximal pressure on 1 cm of roll length up to 1.83 ton (18.33 kn). Rolls can be cooled.
- one deck vibrating screen
- control panel.
All construction is designed in stainless steel and has two levels. Includes stairs, pedestals and barriers. Dimensions: length 4800 mm x width 4000 mm x height 7800 mm.
Technical documentation included in German and polish. Line had been working on antibiotics for animals with reported output up to 60 kg/h. Typical 30-200 kg/hr depending on product.
Місцезнаходження: Perry Poland Warehouse
У кошик
Детальніше
8" X 2" Hosokawa L200/50P Roll Compactor With Frewitt MG336 Granulator
Код #RG9918
Used Hosokawa Bepex model LP200/50P stainless steel roll compactor. Has 50mm wide X 200mm diameter rolls driven by approximately 4kw motor. Discharges into Frewitt model MG336 stainless steel granulator with spare screens. All mounted in stainless steel frame approximately 1500mm X 1700mm x 2000mm high. Includes plc touch screen control panel with cd and manuals. Capacity approximately 10-100 kg/hr depending on product. Overhauled & updated by Hosokawa Bepex in 2011.
Місцезнаходження: UK
У кошик
Детальніше
8" X 1.5" Fitzpatrick Model L83 Stainless Steel Chilsonator Roller Compactor
Код #ZG684-44154
Used Fitzpatrick model L83 chilsonator roller compactor. Stainless steel product contact surfaces. Horizontal feeder with agitated feed hopper. Driven by .25 HP DC motor. Vertical compression screw driven by 1 HP DC motor. 8" diameter X 1.5" wide rolls. Driven by 2.5 HP, 230/460 volt variable speed motor drive. On base with controls.
Місцезнаходження: Midwest USA
У кошик
Детальніше
2" x 8" Fitzpatrick Mdl IR520 Stainless Steel Chilsonator Roll Compactor System
Код #ZG63014
Used Fitzpatrick model IR520 stainless steel chilsonator roll compactor system. Chillsonator has (2) stainless steel grooved rolls measuring approximately 2" (50.8mm) wide x 8" (203.2mm) diameter. Approximate capacity 22 lbs to 220 lbs per hour (10 kgs to 100 kgs per hour) depending on product. Rolls driven at approximately 6-24 rpm with pressure 0 to 15,000 lbs (0 to 68.040 kg) per linear inch. Includes M5A mill which is built into the chillsonator as an integral unit. Built 1997.
Місцезнаходження: West Coast USA
У кошик
Детальніше
10" X 7" Fitzpatrick Model 7LX10D Hastelloy C276 Chilsonator/Roll Compactor
Код #20704-01
Used Fitzpatrick Model 7LX10D chilsonator/roll compactor. Approximately 10" diameter X 7" face Sinewave grooved style hastelloy C276 clad rolls. Approximately 450 kg to 900 kg per hour. Driven by a 10 HP, 3 phase, 60 cycle, 208-230/460 volt, 1760 rpm motor with Falk gearbox, ratio 104.98:1, output 8.2 rpm. (1) hastelloy C276 upper feed hopper with conditioner bar driven by a 1.5 HP gear motor, 30:1 ratio, into (2) hastelloy approximately 3" diameter horizontal twin screw feeder, driven by a 2 HP gear motor with a ratio of 20:1. (2) 3" diameter hastelloy vertical screw feeder, driven by a 10 HP 3 phase, 60 cycle, 460 volt, 1760 rpm motor. Mounted on a carbon steel frame.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
2" X 8" Bepex L200/50P Stainless Steel Compactor
Код #9537-07
Used Bepex L200/50P compactor. Stainless steel construction. 200mm diameter X 50mm face cantilevered rolls.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
12" x 06" Roller Compacting Plant made by Alexanderwerk
Код #XRG9713
Used roller compacting plant made by Alexanderwerk circa 1987 with equipment still installed but no longer in use. Plant was used to compact cordierite and silicate material from low density powder into a high density powder. The compacting unit itself only ran on 2nd gear with 10 gears available so had spare capacity. Equipment includes:
- Alexanderwerk roller compactor WP 300 x 500 V
- Alexanderwerk RFG 350 VD fine grain granulator, rotor diameter 350mm by length 660mm powered by 2.2kW drive.
- Feed screw conveyor
- Flake crusher
- Control cabinet
- Dust Removal
- Jenco vacuum conveyor system
- Rotex seive screener
Technical documentation available at inspection.
Місцезнаходження: United Kingdom
У кошик
Детальніше
10" x 4" Mdl. 4LX10D Chilsonator System
Код #21431
Used Stainless Steel Fitzpatrick Chilsonator System
Model: 4LX10D
Serial #: DM 194
Roll diameter: 10"
Roll width: 4"
Includes stainless steel Fitpatrick Fitzmill D6A
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
8" X 2" Hosokawa L200/50P Roll Compactor With Frewitt MG336 Granulator
Код #RG1053
Used Hosokawa Bepex model LP200/50P stainless steel roll compactor. Has 50mm wide X 200mm diameter rolls driven by approximately 4kw motor. Discharges into Frewitt model MGI-405 stainless steel oscillating granulator. All mounted in stainless steel frame approximately 1500mm X 1700mm x 2000mm high. Includes control panel and Vacumax powder feeding system. Capacity approximately 10-100 kg/hr depending on product.
Місцезнаходження: UK
У кошик
Детальніше