Головна » Міксери та змішувачі » Міксери безперервної дії

Міксери безперервної дії

1.4" Diameter 11.2" Long Readco Model Processor 316L Stainless Steel Twin Screw Mixer

Код #375-73

1.4" Diameter 11.2" Long Readco Model Processor 316L Stainless Steel Twin Screw Mixer

Код #375-73

Used Readco twin screw mixer. Machine model processor. Has 1.4" diameter X 11.2" long screws. 316L stainless steel. Rated 150 psig. 3 HP, 3 phase, 60 cycle, 480 volt. Speed 1-65 rpm. New 1987.

Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)

У кошик Детальніше

140mm Buss Model PR-140 Extruder

Код #RG8155

140mm Buss Model PR-140 Extruder

Код #RG8155

Used Buss model PR-140 approximately 140mm diameter extruder. Length 110cm. Motor and control panel are not included

Місцезнаходження: EUROPE

У кошик Детальніше

12" Diameter 96" Long Readco Twin Screw Processor

Код #2212

12" Diameter 96" Long Readco Twin Screw Processor

Код #2212

Used 12" diameter Readco twin screw processor. Mixing chamber with 12" diameter overlapping screw segments 96" long. With 3" transition section to 10" diameter. 41" long metering discharge section. 3-zone jacketed barrel formerly driven by 40 HP DC drive that is not available. New 1975 but reported only used experimentally for 200 hours or less. Reported designed for continuous mixing of paste, doughs, and high viscosity products with ingredients continuously subject to shear, compression, expansion, and kneading actions. S/N 104762. Order no S-22745. Screws are carbon steel with the discharge sect hardened.

Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)

У кошик Детальніше

10" Wide 6' Long Baker Perkins Model MP1072 304 Stainless Steel Double Arm Continuous Mixer

Код #182-049

10" Wide 6' Long Baker Perkins Model MP1072 304 Stainless Steel Double Arm Continuous Mixer

Код #182-049

Used Baker Perkins model 11A-MP-11A1072 double arm continuous mixer. 10" wide X 6' long chamber. With dual mixing screws mounted one above the other. 304 ELC stainless steel contacts. 304 stainless steel jacket rated for 80 psi. Includes 14" diameter X 14' long stainless steel jacketed screw conveyor for feed or take-off.

Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)

У кошик Детальніше

4" Diameter Stewart Bolling Continuous Mixer/Extruder Package

Код #ZP56120

4" Diameter Stewart Bolling Continuous Mixer/Extruder Package

Код #ZP56120

Used Stewart Bolling 4" continuous mixer/extruder package. Includes Lufkin gear box and 150 HP GE DC motor, 550 volt DC input.

Місцезнаходження: Midwest USA

У кошик Детальніше

Caleva Model 100/200 Production Scale Gear Type Extruder

Код #9526V-07

Caleva Model 100/200 Production Scale Gear Type Extruder

Код #9526V-07

Used Caleva model 100/200 production scale gear type extruder. Rated 100/200 kilo/hour. Contra rotating extrusion gears. Skid mounted. With 7.5 kW drive.

Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)

У кошик Детальніше

2" Diameter Farrel #2FCM Continuous Mixer

Код #21487-09

2" Diameter Farrel #2FCM Continuous Mixer

Код #21487-09

Used Farrel #2FCM continuous mixer. Laboratory size unit includes #7 and #15 style rotors. Driven by an approximately 40 hp DC motor, includes SCR control and operator control panel. Includes 24KW Sterlco water temperature controller and Ktron feeder. Serial #69A978.

Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)

У кошик Детальніше

9" Diameter Farrel #9FCM Continuous Mixer

Код #21487-08

9" Diameter Farrel #9FCM Continuous Mixer

Код #21487-08

Used Farrel #9FCM continuous mixer. Driven by 500 hp DC motor includes SCR and isolation transformer. Includes #15 style rotors and (1) set of spare #15 rotors, operator control panel and hydraulic pumping system for chamber.

Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)

У кошик Детальніше

9" Diameter Farrel #9 FCM Continuous Mixer

Код #21487-06

9" Diameter Farrel #9 FCM Continuous Mixer

Код #21487-06

Used Farrel #9 FCM continuous mixer. Has #15 style rotors, quick change design, driven by 500 hp water cooled DC motor, 1150/1380 rpm. Gearbox has 8.99/1 ratio rated at 1100 hp. Includes digital drive and isolation transformer, 2 spare sets of #15 style rotors, operator control panel and hydraulic pumping system for chamber. Serial #80A1426.

Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)

У кошик Детальніше

2" Diameter Farrel CP250 Continuous Mixer Extruder Package

Код #ZP63308-1

2" Diameter Farrel CP250 Continuous Mixer Extruder Package

Код #ZP63308-1

Used Farrel model CP250, Series II, 2012 continuous mixer/extruder package. System includes the following: FCM mixer with 2.88" bore, #15 style rotors, with 60 hp main motor, 850 rpm. 4" Farrel hot feed extruder with 11.5/1 L/D, driven by 30 hp motor supplying 100 rpm screw speed. PLC control with Wonderware software. Automated vent port cleaner, segmented plugged dams, injection ports, injection nozzle.

Місцезнаходження: Southeast USA

У кошик Детальніше

3.9" Buss Model APC100 18 P70 Ko-Kneader

Код #XL1501

3.9" Buss Model APC100 18 P70 Ko-Kneader

Код #XL1501

Used 100mm Buss 20/1 L/D, model APC100 18 P70 Ko-Kneader with 230KW DC motor, motor drive & temperature controls. Also includes: (1) Screw type vertical crammer feeder mounted on primary kneader feed throat. (1) 60mm DDS twin screw Horizontal side feeder, (1) Melt pump at kneader discharge. (1) Screen changer, duel bolt design with pump and operator controls, (1) BKG Diverter valve between screen changer and AH2000-BKG underwater pellerizer with controls, water box and die plate, water system pump, reservoir with calrod heater, spin dryer, fines filtration water slide. Also included are associated control panels and all available spare parts and technical documentation. System new in 1997 and updated 2008 with Siemens SPS S7. Last Used PP with approx. 20% filler throughput approx. 550 kg/h. PP with low MFR without filler throughput approx. 570 kg/h

Місцезнаходження: Недоступно

У кошик Детальніше

2" Model 2FCM Continuous Mixer With 3.5" Dump Extruder

Код #ZP63450-1

2" Model 2FCM Continuous Mixer With 3.5" Dump Extruder

Код #ZP63450-1

Used Farrel Model 2FCM continuous mixer with 3.5" dump extruder. Continuous mixer is equipped with a 30 hp DC motor with SCR control, includes hydraulic system for lubrication, operator control panel, and #7 rotor design. Has water cooled chamber with electric heat. New 3/1989. Downstream includes 3.5" Stuart Bolling hot feed extruder, with 7/1 L/D. Driven by 20 hp DC motor, has 6" x 8" offset feed throat for taking discharge from the Number 2 Farrel mixer. Includes strand die, has 14.58/1 gear ratio at 1750 rpm input. Includes rotary union to the screw, electrically heated air cooled barrel, swing gate head and manual orifice adjustment.

Місцезнаходження: Northeast USA

У кошик Детальніше