Aeromatic Model AETD-6200 Stainless Steel Fluid Bed Dryer
Stock #866V-09
Used stainless steel fluid bed dryer
Mfr: Aeromatic
Model AETD-6200
Has (1) bowl 2600 litre capacity with 1.48 sqmt heating area.
Approximately 250kg batch capacity with bottom discharge.
Fan rated 14400 cum/hr driven by 31 kw 380 volt 3/50 2900 rpm motor.
Air heater rated 373200 kcal/hr with inlet temperature -10 degc and outlet temperature 80 degc.
Includes 2.5 sqmt air filter and 25.7 sqmt exhaust air filter. Rated 2 bar pressure.
Location: Northeast USA
Add to Cart
View Details
Aeromatic Model S-4 Stainless Steel Fluid Bed Dryer/Spray Granulator
Stock #L1110-02
Perry is offering a high quality, used Aeromatic model S-4 stainless steel fluid bed dryer/spray granulator. Aeromatic is recognised as a leading manufacturer of process equipment. Filter housing rated 2 bar pressure shock resistance. Includes (2) product bowls with 20-150 kg filling range depending on product and bulk density. Has spray nozzle with Watson Marlow model 520S peristaltic pump. Includes steam heated air heater and main air fan. Also includes DCE dust collector. Last used as an agglomerator. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Add to Cart
View Details
Aeromatic Model T/SG7 1245 Liter Fluid Bed Dryer
Stock #ZG753-42252
Used Aeromatic model T/SG7 fluid bed dryer. K3 bowl size, 1245 liter capacity. Steam heated with air handling system, blower, and control panel with operator interface. Built 2005.
Location: Midwest USA
Add to Cart
View Details
Aeromatic Model T4 304 930mm Stainless Steel Fluid Bed Dryer
Stock #HG59309
Used Aeromatic model T4 304 stainless steel fluid bed dryer. Includes approximately 930mm stainless steel product bin and air handling system. Includes blower rated 0,8 cubic meter/S direct driven by 110 kW 380V 3/50 Hz el. motor. Unit includes control panel.
Location: Central Europe
Add to Cart
View Details
Aeromatic Model T520419 43" X 5'10" Stainless Steel Fluid Bed Dryer
Stock #517-20915
Used Aeromatic model T520419 stainless steel fluid bed dryer. 43" diameter X 5'10" straight side. Has approximately 55" diameter X 22" deep bowl.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Aeromatic Type S6 Stainless Steel Fluid Bed Dryer/Spray Agglomerator
Stock #L0696-01
Perry is offering a high quality, used Aeromatic type S6 stainless steel fluid bed dryer (spray agglomerator). Aeromatic is recognised as a leading manufacturer of process equipment. Pressure shock resistance 2 bar, reacting pressure "EX" flap <0.1 bar, "EX" flap area 0.675 square meter. Requires air preparation housing pressure shock resistance 0.02 bar, heating capacity 753'500 kJ/H, heating medium 4 bar steam. Also requires fan air quantity 2 cubic meter/second, static pressure 6'000 pa, motor 18.5 kW, 415 V, 50 hz . Includes Mikro Pulsaire type 92-HB-005 dust collector. Includes Graviner explosion equipment and 2 product containers. Approximately 200-250 kg capacity depending on product. Last used for agglomerating gravy granules. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: UK
Add to Cart
View Details
Buehler 316 Stainless Steel Fluid Bed Dryer Line
Stock #UG6044
Used fluid bed dryer line for production coated granules. Line consist of:
- stainless steel (Aisi 316) mixing tank with volume 1 M3 for coating liquid preparation.
- peristaltic Dosing pump by Watson Marlow for feeding coating liquid. Working output up to 80 l/h, driven by electric motor 0.18 kW and is equipped with flow meter by Krohne.
- two powder container mounted on scale for preparing doses of powder. Each container with volume 1.2 M3. Designed in stainless steel (Aisi 316). Includes weighting cells.
- Rotary valves (2 pcs) for Dosing a powder into fluid bed dryer. Equipped with frequency converters. Bigger valve has output up to 750 kg/h and is driven by 0.55 kW electric motor, smaller has output up to 150 kg/h and is driven by 0.18 kW electric motor.
- air filter for incoming air - air flow 15000 Nm3/h, pressure drop 300 pa.
- steam heater for air heating by Klima - steam pressure 4 bars, heating capacity 433 kW, working temperature of air - up to 200C.
- blower fan with silencer designed by Klima. Air flow - up to 15000 Nm3/h, pressure 7500 pa. Driven by electric motor 75 kW. Equipped with frequency converter and air flow measurement device.
- fluid bed dryer by Buehler with coating nozzles (8 pcs). Can be used as continous work mode and as a batch type as well. Air flow 10000 Nm3/h, working temperature of air up to 200C. Contact parts designed in stainless steel (Aisi 316). Drying surface 1 M2. Dryer is equipped with temperature of product measurement devices (4 pcs), pressure difference measurement devices (2 pcs), inlet air temperature measurement and regulation, flow indicator for coating liquid on each nozzle, measurement and regulation of general flow of coating liquid.
- cyclone for exhaust air cleaning. Designed for air flow up to 15000 M3/h. Material stainless steel. Equipped with Rotary valve - output 50 kg/h, driven by 0.18 kW motor.
- silos for final product - vertical, volume 50 M3, designed in stainless steel.
Location: EU
Add to Cart
View Details
Calmic-Cisa (Italy) Type C12 MK Stainless Steel Batch Fluid Bed Dryer
Stock #U1874-1
Used fluid bed dryer, batch type, by Calmic-Cisa (Italy) type C12 MK. Contact parts designed in stainless steel. Dryer is equipped with two stainless steel mobile pans for product, each total volume 500 l. Working size of batch 100-200 kg. Dryer also has blower (22 kW) and control panel. Dryer is steam heated, heat capacity up 115 000 kcal/h, steam consumption in range 120-180 kg/h with pressure range 2-5 kg/cm2. Air consumption 9000 M3/h, at pressure 6 kg/cm2. Possibility to install spraying nozzles for granules production. Dimensions: length 3200 mm x width 1750 mm x height 2800 mm. Technical documentation included with machine.
Location: Perry Poland Warehouse
Add to Cart
View Details
Glatt 12" Dia. Stainless Steel Wurster Insert
Stock #ZG724-42228
Used Glatt Wurster insert. 12" diameter chamber with expansion chamber. Stainless steel construction with pneumatic discharge option. Rated 2 bar shock resistance. On cart. New 2008. M-023861.
Location: Midwest USA
Add to Cart
View Details
Glatt GPCG 1 Stainless Steel Mobile Fluid Bed Dryer
Stock #L1438-02
Perry is offering a high quality, Used Glatt model GPCG1 stainless steel mobile fluid bed dryer system with associated parts. Glatt is recognised as a leading manufacturer of process equipment. Operating pressure 0.79 bar. Fan capacity 2.2kw, 3400rpm 3x220 volt. 60hz. Electric heating capacity 4kw. Compressed air pressure 6 bar. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Add to Cart
View Details
Glatt Model GCPG-5 Fluid Bed Coater
Stock #754-7300
Used Glatt GCPG 5 fluid bed coater. Includes 7" Wurster and 9" Wurster columns. 5 kg maximum charge, 22 liters volume product container. 440 cfm fan unit. 55 kW fan motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Glatt Model GPCG 30 18" Wurster
Glatt Model GPCG 300/500 Stainless Steel Fluid Bed Dryer
Stock #AG60912-03
Used Glatt model GPCG 300/500 stainless steel fluid bed dryer. Includes Wurster, control panel, filter, dust collector, vacuum pump.
Location: N/A
Add to Cart
View Details
Glatt Model GPCG 300/500 Stainless Steel Fluid Bed Dryer
Stock #AG60912-02
Unused Glatt model GPCG3 00/500 stainless steel fluid bed dryer. Includes Wurster, control panel, filter, dust collector, vacuum pump.
Location: Europe
Add to Cart
View Details
Glatt Model GPCG-1 Lab Size Mobile Fluid Bed Dryer
Stock #U2352-4
Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.
Location: Perry Poland Warehouse
Add to Cart
View Details
Glatt Model GPCG-5 22 Liter Fluid Bed Dryer
Stock #21019-03
Used Glatt Fluid Bed Dryer
Model: GPCG-5
Capacity 22 Liter
Worster insert 7" = 9.6 liter, 9" = 18 liter
Includes laptop computer, manuals and drawings
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Glatt Model GPCG-5 Fluid Bed Dryer
Stock #8901-02
Used Glatt GPCG-5 fluid bed dryer. 7" Wurster, 2 bar, 5.5 kW, 3 phase, 60 cycle, 460 volt, 3600 rpm. 16500 kcal/hour, 3 bar steam pressure. 6 bar compressed air.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Glatt Model GPCG-5 Stainless Steel Fluid Bed Dryer
Stock #20544-04
Used Glatt GPCG-5 fluid bed dryer. Stainless steel contacts. 2 bar, 5.5 kW, 3 phase, 60 cycle, 460 volt, 3600 rpm. 16500 kcal/hour, 3 bar steam pressure. 6 bar compressed air. Rear vented. Control panel.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Glatt Model GPCG300/500 46" Wurster Fluid Bed Dryer/Coater
Stock #20703V
Used Glatt model GPCG300/500 46" Wurster fluid bed dryer/coater. Includes (2) 46" Wurster columns. 875 liter dryer/granulator/coater. 300-500 kg batch range. Steam consumption 800 kg/hour at 3 bar (45 psi). Twin chambered filter system.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Glatt Model GPCG60SRS Stainless Steel Fluid Bed Dryer Granulator
Stock #ZG753-42287
Used Glatt GPCG 60 SRS fluid bed dryer Wurster insert with expansion chamber, stainless steel construction. Built 2001.
Location: Midwest USA
Add to Cart
View Details
Glatt Model GPCG60SRS Stainless Steel Fluid Bed Wurster Insert
Stock #ZG753-42298
Used Glatt model GPCG 60 SRS fluid bed dryer Wurster insert with expansion chamber. Stainless steel construction. New 2003.
Location: Midwest USA
Add to Cart
View Details
Glatt Model HS 18" 316L Stainless Steel Wurster Insert
Stock #ZG753-42342
Used 18" HS Glatt Wurster insert. 316L stainless steel construction. With expansion chamber and self-dumping bowl with cylinder. Less spray gun and plate. Last used with a Glatt GPCG 120M.
Location: Midwest USA
Add to Cart
View Details
Glatt Model HS 9" Stainless Steel Wurster Coater Insert
Stock #ZG724-42229
Used Glatt 9" HS Wurster coater insert, stainless steel construction with 9" diameter chamber with expansion chamber and spray gun. On cart.
Location: Midwest USA
Add to Cart
View Details
Glatt Model LD120SF Stainless Steel Bowl Inverter
Stock #ZG753-42277
Used Glatt model 200 LD-200 120 SF bowl inverter, stainless steel construction, designed to lift and invert 120 liter Glatt fluid bed dryer bowls. With bowl clamp and funnel. Post mounted with operator interface and control panel and 120 liter Glatt bowl. Built 2003. Previously used with a Glatt GPCG 120.
Location: Midwest USA
Add to Cart
View Details
Glatt Model WSG-1 Stainless Steel Fluid Bed Dryer
Stock #U1898-1
Used fluid bed dryer by Glatt model WSG-1. Contact parts made of stainless steel. Volume of batch - about 4,5 l and weight about 1 kg. Heating capacity 3800 kcal/h. Fan is driven by electric motor with power 1.5 kW, 380/220 V, 3/50, 2800 rpm. Machine has place for spray nozzle for making granules. Shipping dimensions 1300 mm x 900 mm x 1800 mm.
Location: Perry Poland Warehouse
Add to Cart
View Details
Glatt Model WSG-CD 120 Stainless Steel Fluid Bed Dryer
Stock #UG6208
Used stainless steel contact parts fluid bed dryer by Glatt (Germany) model WSG-CD 120. Working batch size up to 120 kg. Ex-design. Includes - two blowing fans, oscillating granulator, dust filter, control panel, electric cabinet. Currently dismantled.
Location: EU
Add to Cart
View Details
Glatt Model WSG15 Sanitary Stainless Steel Fluid Bed Dryer
Stock #20491-02
Used Glatt model WSG15 sanitary stainless steel fluid bed dryer. Steam heated 30000 heating kcal/kW. 15 kgs batch capacity, includes (3) product carts and Wurster column. Control panel. Pump and air duct work. Electrical 3/60/220-440 volt.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Glatt Model WSG60 220 Litre 304 Stainless Steel Batch Type Fluid Bed Dryer
Stock #6685
Used Glatt model WSG 60 batch type fluid bed dryer. Rated 220 litre, 60 kg batch capacity. Sanitary 304 stainless steel contacts. Fan driven by 15 kW, 220 volts, 3 phase, 60 cycle, 3510 rpm motor. Serial #100150. With electrical controls. Last in pharmaceutical plant service.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Glatt Model WST 120 Stainless Steel Fluid Bed Dryer
Stock #ZG753-42285
Used Glatt WST 120 stainless steel fluid bed dryer. 2-bar shock rated. Includes (2) 120 liter bowls on stainless steel carts and a Glatt 200 LD-200120 bowl lift discharge stand. Built 2001.
Location: Midwest USA
Add to Cart
View Details
Glatt Model WST30UD Sanitary Fluid Bed Dryer
Stock #20544-05
Used Glatt WST30UD sanitary fluid bed dryer. Stainless steel contact, 18.5 KW motor, 3/60/220 volt, 110 volt control panel. Heating capacity steam, 60000 kcal/hr, compressor air 6 bar,
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Glatt Stainless Steel Granulator Type UNIGLATT
Stock #B0019-02
Used GLATT stainless steel granulator type UNIGLATT-N° 100494-3x 220/380 Volts-Fan : Hp 1.5 - 240 nm3/H-Equipment sold as is condition-With documentation
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Glatt WSG PRO 500 Stainless Steel Fluid Bed Dryer
Stock #ZG62849
Used Glatt Model WSG PRO 500 SC Stainless Steel Fluid Bed Dryer
Approximate total volume: 12.5 cu. meters
Approximate container volume: 1,560 liters
Maximum Pressure at 11 bar design
Includes fixed stainless steel dust filters
Unit has integrated spray granulation arm
Includes air handling unit, exhaust air handling skid and mechanical explosion suppression valves. Also includes WIP circuit.
Location: Midwest USA
Add to Cart
View Details
Glatt WSG5 Stainless Steel Fluid Bed Dryer
Stock #20791V-01
Used Glatt WSG5 stainless steel granulating fluid bed dryer. Steam heated coil. Internal blower.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Niro Aeromat Model MP-3 Stainless Steel Fluid Bed Dryer
Stock #20574-03
Used Niro Aeromat model 11A-MP-11A-3 stainless steel fluid bed dryer, includes cyclone.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Niro Model MP1 Stainless Steel Fluid Bed Dryer
Stock #L1307-01
Perry is offering a high quality, Used Aeromatic model MP1 stainless steel fluid bed dryer. Aeromatic is recognised as a leading manufacturer of process equipment. Stainless steel filter chamber approximately 16 litre capacity with a maximum product volume of 13.5 litre which is hinge mounted and removeable. Operating pressure is 6 bar. Driven by a 3.3kw 3/50 supply. Reportedly minimum batch weight 400g and maximum batch weight 6 kg. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Add to Cart
View Details
Niro Model MP1 Stainless Steel Multi Processor Fluid Bed Dryer/Granulator/Coater
Stock #L1025-01
Perry is offering a high quality, Reportedly very little used and only ran for validation, Niro model MP1 stainless steel multi processor fluid bed dryer/granulator/coater. Niro is recognised as a leading manufacturer of process equipment. Can be used for drying, top spray fluid bed granulation and bottom spray powder, pellet and tablet coating. Filter chamber includes 12 litre product bowl which is hinge mounted and removable. Also includes cylindrical expansion chamber and hinge. Has flange, sightglass and lamp. Inlet air handling includes inlet air preparation unit with G4 inlet filter, steam air heating coil, face/bypass damper with actuator and F8 fine filter. Also has Ventex ESI-R (10 bar) inlet explosion protection valves including controls. Process air bypass system includes additional regulating valves to allow air to bypass the processing chamber. Fan is 10 bar pressure shock resistance with negative static pressure head to 14,000 pa driven by EEXD motor. Control system is Siemens S7/300 and 11A=MP-11A370 for location in zone 2 area. Includes product temperature sensor and indication. In addition to standard unit it includes additional 16 litre stainless steel product container and sample socket with Perspex flask. Includes top spray lance assembly with nozzle set and through the wall peristaltic pump. Has Precision coater insert for 12 & 16 litre containers with pellet retaining element and additional nozzle inserts. Has secondary dust filter for use with the Precision coating process (10 bar PSR). Also has PRE heater and humidification coil. Includes dehumidification unit and H13 Hepa inlet filter. Also includes exhaust police filter with EPV and batch data recording system, data recording and trending package. Supply voltage 380 volt 3/50. Reportedly minimum batch weight 0.16 kg and maximum batch weight 6 kg. New 2005 and last used on 1.5-5 kg batches. Reportedly little used and in excellent condition. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Add to Cart
View Details
Niro Model MP1 Stainless Steel Multi Processor Fluid Bed Dryer/Granulator/Coater
Stock #L1025-02
Perry is offering a high quality, Reportedly very little used and only ran for validation, Niro model MP1 stainless steel multi processor fluid bed dryer/granulator/coater. Niro is recognised as a leading manufacturer of process equipment. Can be used for drying, top spray fluid bed granulation and bottom spray powder, pellet & tablet coating. Filter chamber includes 12 litre product bowl which is hinge mounted and removable. Also includes cylindrical expansion chamber and hinge. Has flange, Sightglass and lamp. Inlet air handling includes inlet air preparation unit with G4 inlet filter, steam air heating coil, face/bypass damper with actuator and F8 fine filter. Also has Ventex ESI-R (10 bar) inlet explosion protection valves including controls. Process air bypass system includes additional regulating valves to allow air to bypass the processing chamber. Fan is 10 bar pressure shock resistance with negative static pressure head to 14,000 pa driven by EEXD motor. Control system is Siemens S7/300 and 11a=MP-11A370 for location in zone 2 area. Includes product temperature sensor and indication. In addition to standard unit it includes additional 16 litre stainless steel product container and sample socket with perspex flask. Includes top spray lance assembly with nozzle set and through the wall peristaltic pump. Has Precision coater insert for 12 & 16 litre containers with pellet retaining element and additional nozzle inserts. Has secondary dust filter for use with the Precision coating process (10 bar PSR). Also has PRE heater and humidification coil. Includes dehumidification unit and H13 Hepa inlet filter. Also includes exhaust police filter with EPV and batch data recording system, data recording and trending package. Supply voltage 380 volt 3/50. Reportedly minimum batch weight 0.16 kg and maximum batch weight 6 kg. New 2005 and last used on 1.5-5 kg batches. Reportedly little used and in excellent condition. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Add to Cart
View Details
Niro Model MP3/2/3 Stainless Steel Multi Processor Fluid Bed Dryer/Granulator/Coater
Stock #L1025-03
Perry is offering a high quality, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Niro is recognised as a leading manufacturer of process equipment. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Add to Cart
View Details
O'Hara Technologies FBDG-30 30 KG 304L Stainless Steel Fluid Bed Dryer
Stock #ZG62493
Used O'Hara Technologies model FBDG-30 316L stainless steel fluid bed dryer.
30 kg working capacity.
100 liter bowl capacity.
900 cfm process air volume.
Diameter of filter housing is 1200mm/47".
Overall height is 4000mm/157".
Overall depth is 1400mm/55".
Working air temperature is 40 deg F, 80 deg C.
Suitable for mixing powders, drying granular crystalline, coarse or similar material in pharmaceuticals, fine chemicals, dyes and food.
Location: West Coast USA
Add to Cart
View Details
Pro-C-Ept Model Mini Air Pro Fluidised Bed Dryer
Stock #L1438-01
Perry is offering a high quality, Used Pro-C-Ept model Mini Air Pro fluidised bed dryer system with associated parts. Power supply 220 volt, 50hz, 16amp. Pro-C-Ept is recognised as a leading manufacturer of process equipment. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Add to Cart
View Details
Stainless Steel Pilot Fluid Bed Dryer/Granulator Kugelcoater
Stock #BG0032-01
Used Pilot fluidized air bed / granulator COATING HUTTLIN-Type HKG-05-TJ- KUGELCOATER-400 volts - 10 kw-stainless steel construction-Material visible on RV-Sold "as is"
Location: FRANCE
Add to Cart
View Details
Strea 7 Aeromatic Fluid Bed Dryer
Stock #21149V-09
Used Strea 7 Aeromatic fluid bed dryer
440 volts
Heating KCal/H = 12,700
3.6 hp
Serial #9716
With controls and collector
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Vector Model FL-M-30EX Flo-Coater Stainless Steel Fluid Bed Processor
Stock #20544-06
Used Vector model FL-M-30EX Flo-Coater, stainless steel contacts, sanitary fluid bed processor. Includes (1)100 kgs Wurster chamber, (2) 100 kgs dryer chamber. Driven by 7.5 HP motor (missing). Electrics 3/60/460 volt
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
CPE&M Model B-5 Fluid Bed Dryer Granulator
Stock #AS60916 Sold
Used CPE&M model B-5 fluid bed Dryer Granulator. Volume of the container 22 liter, internal diameter of the container 400mm. Capacity 4-6 kg/hour. Capacity of the fan 1300 m3/hour, power 3 KW. Temperature 0-100*C. Size: 1200 x 700 x 2300 mm. Weight of the main unit is 700 kg.
Location: Europe
View Details
Glatt Model GPCG 3/5 Stainless Fluid Bed Dryer Parts
Stock #L1057-02 Sold
Used Glatt GPCG 3/5 stainless fluid bed dryer parts. Includes expansion chamber with top spray arm. Also includes bowl with stainless steel trolley.
Location: Perry England Warehouse
View Details
Glatt Model GPCG-5 Spezial 180mm X 360mm Stainless Steel Fluid Bed Dryer/Spray Granulator
Stock #RG9424 Sold
Used Glatt model GPCG-5 stainless steel (1.4301) fluid bed dryer - Glatt particle coater granulator. Has product pan mounted on wheels with capacity 22 litre. Pan size: diameter 180 x 360 mm, includes spray nozzle. Includes Anke dust filter, electric heating with capacity 57,8 kW + 18,0 kW frost protection, fan type RC R U140 MBGX GL360 with capacity 0,56 m3/sec, motor 18,5 kW, 400 V (Ex), (2) switchgears. Total height 3,3 m - with hydraulic closing.
Location: EU
View Details
Glatt Model WSG PRO 120 Stainless Steel Fluid Bed Dryer
Stock #L1563-02 Sold
Perry is offering a high quality, Used Glatt Fluid Bed Batch Powder Drying System, type WSG PRO 120. AISI 318L (1.4462), AISI 316L (1.4404), AISI 316 (1.4401) stainless steel on product contact parts. Glatt is recognised as a leading manufacturer of process equipment. Polished inside to RA < 0.5 um. Total capacity 525 liters, working capacity 157-420 liters per batch. (2) Product drying trolleys on wheels, Glatt control panels/system. Incl. (1) AHU incl. Glatt turning turret, LD 120. (1) Air handling unit/system. (1) Clint cooling system. (1) Dust collection filtration system, safty valves, sensors, piping, and additional infrastructure. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Denmark
View Details
Glatt Model WST-CD-120/200 1200mm X 550mm 316 Stainless Steel Fluid Bed Dryer
Stock #RG7309 Sold
Used Glatt model WST-CD-120/200 316 stainless steel fluid bed dryer. Pan approximately 1200mm diameter X 550mm straight side with 500 litre or 120-300 kg batch capacity. Pan with rotating bowl mesh. Can be heated by steam. Does not include fan. Includes dust filter, switchgear, product discharge silo, rotary valve for discharging and dosing, and CIP cleaning unit.
Location: EUROPE
View Details
