Plant - Agricultural Chemicals(2)
Plant - Air Separation, Oxygen, Nitrogen, Hydrogen(23)
Plant - Biorefining(7)
Plant - Brewery, Distillery, Alcohol(11)
Plant - Dairy Milk Ice Cream(2)
Plant - Edible Oil(13)
Plant - Foods(32)
Plant - Industrial Inorganic Chemicals(3)
Plant - Industrial Organic Chemicals(5)
Plant - Mineral Processing, Mining, Cement(10)
Plant - Miscellaneous(27)
Plant - Petrochemical, Refinery & Asphalt(5)
Plant - Pharmaceutical(1)
Plant - Plastic Materials, Synthetic Resins and Rubber, Manmade Fibers(5)
Plant - Plastic Rubber(3)
Banbury Type Mixers(4)
Continuous Mixers(9)
Dispersion Mixers Europe(70)
Double Arm Mixers(35)
High Intensity Mixers(58)
Intensive Pharma Mixers(21)
Miscellaneous Powder Mixers(6)
Mixer Miscellaneous(24)
Mixer Universal(31)
Nauta Mixers(58)
Planetary Mixers(80)
Plowshare Mixers(45)
Ribbon Mixers(44)
Ribbon Mixers Europe(44)
Tumbling Mixers (84)
Atmospheric Tray Dryers(7)
Batch Fluid Bed Dryers(47)
Conical Rotary Vacuum Dryers(17)
Continuous Fluid Bed Dryers(14)
Conveyor Dryer(5)
Conveyor Dryer ( Sandvik Type )(3)
Flash Dryer (4)
Other Dryers(1)
Pan Dryers(12)
Rotadisc Dryer(3)
Rotary Hot Air Dryers(6)
Rotary Kiln Dryer(2)
Rotary Multi-Pass Dryers (Heil Type)(1)
Rotary Steam Tube Dryer (4)
Rotary Tray Dryers(3)
Cartridge Filters(67)
Filter Parts(1)
Nutsche Filters(19)
Osmosis and Membrane Filters(19)
Plate & Frame Filter Presses(40)
Plate & Frame Filter Presses Europe(26)
Pressure Leaf Filters (1-199 SQFT)(20)
Pressure Leaf Filters (200 - SQFT & Up)(7)
Pressure Leaf Filters, Europe(14)
Rotary Vacuum Filters - Drum(5)
Rotary Vacuum Filters - Drum, Europe(7)
Rotary Vacuum Flters, Disc(1)
Vacuum Belt Filters(5)
Bins and IBCs(177)
Glass Lined Tanks(63)
Glass Lined Tanks, Europe(16)
Pipe Glass(2)
Stainless Steel Tanks in Europe 10,000-19,999 Litres(30)
Stainless Steel Tanks in Europe 5,000-9,999 Litres(55)
Stainless Steel Tanks in Europe Less than 5,000 Litres(429)
Stainless Steel Tanks in Europe Over 20,000 Litres(37)
Stainless Steel Tanks Less than 1,000 Gallons(251)
Stainless Steel Tanks, 10,000 to 19,999 Gallons(47)
Stainless Steel Tanks, 1000 to 1999 Gallons(81)
Stainless Steel Tanks, 20,000 Gallons and Up(2)
Stainless Steel Tanks, 2000 to 3999 Gallons(51)
Stainless Steel Tanks, 4000 to 5999 Gallons(40)
Stainless Steel Tanks, 6000 to 9999 Gallons(8)
Steel Tanks in Europe(1)
Steel Tanks Less than 10,000 Gallons(16)
Steel Tanks, 10,000 Gal. & Up(3)
Carbon Steel Reactors(1)
Glass Lined Agitators(169)
Glass Lined Baffles(135)
Glass Lined Covers(137)
Glass Lined Drives(67)
Glass Lined Reactor Parts(32)
Glass Lined Reactors(93)
Glass Lined Reactors Europe 5,000 Litres and Up(13)
Glass Lined Reactors, Europe Less than 5,000 Litres(30)
Reactor Parts - Agitator Drives(92)
Reactor Parts - Agitators(5)
Stainless Steel Reactors - Europe 5,000-19,999 Litres(12)
Stainless Steel Reactors - Europe Less than 5000 Litres(60)
Stainless Steel Reactors - Europe More than 20000 Litres(7)
Stainless Steel Reactors 2000 Gallons and Up(7)
Stainless Steel Reactors 500 to 2000 Gallons(19)
Stainless Steel Reactors Less than 500 Gallons(66)
Rectangular Screens(33)
Rotary Screens(26)
Round Screens(44)
Round Screens - Europe(22)
Screen Dewatering(2)
1 1/2" Extruders(4)
2 1/2" Extruders(4)
3 1/2" Extruders(5)
4 1/2" Extruders(6)
8" Extruders(1)
Co-Rotating Twin Screw Extruders(14)
Counter-Rotating Twin Screw Extruders(8)
Extruder Parts, Cleaners, and Accessories(1)
Extruder Screws(11)
Extruder Temperature Panels(10)
Extrusion Line Feeders(10)
Pug Mills - Vacuum Extruder(1)
Rubber Extruders(2)
Cutter Film Densifier(2)
Cutter Guillotine(6)
Cutters/Shredders(27)
Granulator Parts(13)
Pelletizer Parts(1)
Strand Pelletizers(17)
Underwater Pelletizers(12)
Butter or Margarine Machinery(5)
Cooker - Cooler/Bottle Conveyor Type(1)
Cooker, Rendering Type(3)
Fishmeal(2)
Food Extruders(5)
Hollow Screw Cooker Or Cooler(11)
Meat Equipment(7)
Miscellaneous Equipment for Food Processing(30)
Oils and Fats Processing Equipment(16)
Pasteurizers(3)
Rendering Equipment(8)
Vegetable Cutters(6)
Harvestor(1)
Sugar and Pulp Dryers(6)
Sugar Beet Diffuser(5)
Sugar Beet Factory(2)
Sugar Beet Preparation(8)
Sugar Beet Slicer(9)
Sugar Cane Factory(7)
Sugar Cane Preparation(21)
Sugar Centrifuges(23)
Sugar Equipment, Miscellaneous(12)
Sugar Evaporator, Pan, Crystallizer(17)
Sugar Filters(7)
Sugar Pulp Dewatering Press (14)
Bottle Cleaner(2)
Checkweighers(5)
Cottoner(3)
Feeder, Miscellaneous(30)
Feeder, Vibrating Pan(6)
Filler Form Fill & Seal(21)
Filler Form Fill & Seal Liquids(9)
Filler Liquid Gravity(3)
Filler Liquid High Speed(2)
Filler Liquid Pressure Low Speed(2)
Filler Paste - Piston - Pocket(23)
Filler Powder Bag & Box(21)
Filler Powder Capsule - Ampule(12)
Filler Tablet & Counter(5)
Filler Tube(6)
Your Cart is Empty.
Home » Extruders » 3 1/2" Extruders
Stock #15999-1200
Used 100mm Davis Standard 30/1 L/D non-vented Extruder. Model 100MM35F, Serial #M3027, new 12/1991. Has barrel, electrically heated, water cooled barrel. Driven by a 125 HP Reliance DC motor but no SCR control. Gearbox ratio is 17.44:1. No temperature control panel or SCR included.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #9540-4
Used 100mm Davis Standard 30/1 L/D non-vented Extruder. Model 100MM35F, Serial #M3027, new 12/1991. Has barrel, electrically heated, water cooled barrel. Driven by a 125 HP Reliance DC with Reliance SCR control. Gearbox ratio is 17.44:1. No temperature control panel included.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21755V
Used 3.5" 24/1 L/D HPM non-vented extruder. Model 3.5TMC-24, serial #93182. New 1994. Has electrically heated, air-cooled, barrel. Belt driven by a 75 hp brushless DC motor with controls. Flender gearbox type SZNE-250 with a reduction ratio of approximately 13.88/1 rated for up 157 hp. Includes unitized temperature control panel, (1) spare screw, and Witlock dryer.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #2826-4
Used 3.5” Royale Plastic Single-Screw Extruder 16:1 L/D Serial: 2663 Barrel: (vented/non-vented), (# zones), electrically heated, air & water cooled Right angle reducer to a 60 hp Louis Allis type CLC Eddie Current clutch Additional information: fitted with 5/8" X 7/8" head
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZP61648
Used 3.54” Union Extrusion Single-Screw Extruder 44:1 L/D Barrel: non-vented, electrically heated, (5) air cooled zones, (4) water cooled zones Includes: 50 HP motor but no drive, temperature control panel, screw for producing PE film or PS sheet or profiles, and equipped with injection port for gas blowing for foam sheet, pellets or profiles
Location: N/A
Stock #21738V-01 Sold
Used 100mm Davis Standard 49/1 L/D Vented Extruder, New 2020 Extruder is direct connected to 200 hp AC motor with VFD control Includes temperature control panel with touch screen input, electrically heated air cooled barrel, 6/1 gearbox ratio supplying 300 rpm screw speed maximum. Extruder includes additional plugged feed port midway downstream of the barrel for adding graphite or other additives for compounding. No screw included.
Location: Northeast USA
Stock #21558-1 Sold
Used 3” Berlyn Single-Screw Design Extruder 24:1 L/D Serial: 028E776 Barrel: vented (plugged), electrically heated, air cooled, 42” centerline height Additional information: Maag 3.5" screen changer with hydraulic pump. Includes 50 hp DC motor with SCR control (not installed in enclosure), "C" clamp on barrel discharge, water cooled 5" x 6" offset feed throat with drawer magnet. Includes temperature control panel with contacters etc, but no temperature instruments. No screw included.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21202-1 Sold
Used 3.5" Sterling 24/1 L/D single screw extruder. Serial #36849, new 1980. Has electrically heated air cooled barrel with 54" center line height and tucked under belt driven, 75 hp DC motor with new "Spedester" Polyspede SCR control, 460 volt AC input. 13.95/1 gear reduction. Has top center feed throat with 6" x 6" opening. Reported reconditioned temperature panel with new Autonics temperature controllers, new Eurotherm pressure controllers, new Mercury relays and contactors. 54" center line height. Extruder is standard 42" centerline height. No hopper included.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #KG61876 Sold
Reportedly unused 3.5" Hartig model 35-M24 extruder air cooled. Has L/D ratio 24/1. Material of screw AISI 4140. Has Lufkin model DH200D-611 gearbox rated 20.8:1 and 75 Kw/2700 rpm motor. Manufactured in 1989 and reportedly never used. Technical documentation available.
Location: EUROPE
Stock #864-10 Sold
Used 3.5" Thermoplastic Engineering 24/1 vented/plugged single screw extruder. Includes water cooled top center feed, electrically heated air cooled barrel. Belt driven by 100 hp DC motor. Includes temperature control panel with (4) barrel zones and (1) adapter zone. Has Koellmann gearbox with 13.95/1 ratio. Serial #438. Includes stainless steel hopper.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21671-01 Sold
Used 3.5" Davis Standard 24/1 L/D Non-Vented Extruder With Electrically Heated Air Cooled Barrel Manufacturer: Davis Standard Model: 350 Serial: V4574 Belt driven by 60 hp AC motor with Magnetek GP515 VFD drive Motor: 460 volt AC input, 1785 RPM Year: 8/1998 Has top center feed with hopper Has base mounted temperature control panel with (4) barrel zones, (1) clamp ring controller, (4) die zones, (1) adapter controller Has 42" centerline height Click on the link below to see a video of the machine running.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21672V Sold
Used 3.5" Davis Standard Non-Vented 24/1 L/D Extruder With Electrically Heated Air Cooled Barrel Manufacturer: Davis Standard Model: 35EH "Super Blue" Serial: 2182966-1 Driven by 75 hp 230/460 volt AC motor with Yaskawa A1000 VFD drive Has Davis Standard gearbox 17.39/1 gear ratio, rated at 265 hp at 1800 RPM input New 4/2022 Has top center feed with standard hopper and Ramco pneumatic loader Barrel is electrically heated and air cooled with 42" centerline height Has standard clamp head with adapter and base mounted temperature control panel Temperature panel includes (4) barrel zones, (4) die zones and (1) clamp controller
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21776-01EXT Sold
Used 3.5" Davis Standard 30/1 L/D Non-Vented Extruder New 2001. Driven by 100 hp AC with VFD control. Includes hydraulic screen changer, operator control panel, gearbox with 17.89/1 gear ratio. Extruder is Model 35IN35.
Location: Northeast USA
Stock #20773-1EX Sold
Used 3.5” Welex Single Screw Extruder 30:1 L/D Model: 3.5-30:1LHSV Serial: 4746 Year: 1988 Barrel: vented (plugged), (# zones), electrically heated, water cooled, 55" centerline height Screw has a 2-stage design Driven by a 150 hp DC motor with SCR control through Lufkin gearbox Includes: additional spare screw, Welex 5656 melt pump driven by 20 hp motor, Beringer hydraulic screen changer with hydraulic pump, co ex block (spare co ex block not installed), hopper and static mixer Additional notes: previously used on high impact poolystyrene in a lab setting
Location: On Site at Perry (Hainesport, NJ - USA)