Plant - Agricultural Chemicals(2)
Plant - Air Separation, Oxygen, Nitrogen, Hydrogen(19)
Plant - Biorefining(8)
Plant - Brewery, Distillery, Alcohol(20)
Plant - Dairy Milk Ice Cream(3)
Plant - Edible Oil(13)
Plant - Foods(42)
Plant - Industrial Inorganic Chemicals(5)
Plant - Industrial Organic Chemicals(4)
Plant - Mineral Processing, Mining, Cement(12)
Plant - Miscellaneous(26)
Plant - Petrochemical, Refinery & Asphalt(4)
Plant - Pharmaceutical(1)
Plant - Plastic Materials, Synthetic Resins and Rubber, Manmade Fibers(5)
Plant - Plastic Rubber(2)
Banbury Type Mixers(9)
Continuous Mixers(10)
Dispersion Mixers Europe(56)
Double Arm Mixers(36)
High Intensity Mixers(55)
Intensive Pharma Mixers(23)
Miscellaneous Powder Mixers(7)
Mixer Miscellaneous(21)
Mixer Universal(27)
Nauta Mixers(53)
Planetary Mixers(82)
Plowshare Mixers(50)
Ribbon Mixers(44)
Ribbon Mixers Europe(46)
Tumbling Mixers (81)
Atmospheric Tray Dryers(7)
Batch Fluid Bed Dryers(43)
Conical Rotary Vacuum Dryers(20)
Continuous Fluid Bed Dryers(12)
Conveyor Dryer(4)
Conveyor Dryer ( Sandvik Type )(2)
Double Drum Dryers(1)
Flash Dryer (3)
Other Dryers(1)
Pan Dryers(10)
Rotadisc Dryer(3)
Rotary Hot Air Dryers(10)
Rotary Kiln Dryer(2)
Rotary Multi-Pass Dryers (Heil Type)(1)
Rotary Steam Tube Dryer (4)
Rotary Tray Dryers(3)
Cartridge Filters(56)
Filter Parts(1)
Nutsche Filters(17)
Osmosis and Membrane Filters(15)
Plate & Frame Filter Presses(46)
Plate & Frame Filter Presses Europe(27)
Pressure Leaf Filters (1-199 SQFT)(20)
Pressure Leaf Filters (200 - SQFT & Up)(9)
Pressure Leaf Filters, Europe(16)
Rotary Vacuum Filters - Drum(5)
Rotary Vacuum Filters - Drum, Europe(7)
Rotary Vacuum Flters, Disc(1)
Vacuum Belt Filters(6)
Bins and IBCs(168)
Glass Lined Tanks(55)
Glass Lined Tanks, Europe(14)
Pipe Glass(2)
Stainless Steel Tanks in Europe 10,000-19,999 Litres(36)
Stainless Steel Tanks in Europe 5,000-9,999 Litres(49)
Stainless Steel Tanks in Europe Less than 5,000 Litres(358)
Stainless Steel Tanks in Europe Over 20,000 Litres(31)
Stainless Steel Tanks Less than 1,000 Gallons(145)
Stainless Steel Tanks, 10,000 to 19,999 Gallons(18)
Stainless Steel Tanks, 1000 to 1999 Gallons(35)
Stainless Steel Tanks, 20,000 Gallons and Up(3)
Stainless Steel Tanks, 2000 to 3999 Gallons(39)
Stainless Steel Tanks, 4000 to 5999 Gallons(20)
Stainless Steel Tanks, 6000 to 9999 Gallons(15)
Steel Tanks in Europe(3)
Steel Tanks Less than 10,000 Gallons(10)
Steel Tanks, 10,000 Gal. & Up(2)
Carbon Steel Reactors(1)
Glass Lined Agitators(198)
Glass Lined Baffles(179)
Glass Lined Covers(179)
Glass Lined Drives(94)
Glass Lined Reactor Parts(38)
Glass Lined Reactors(74)
Glass Lined Reactors Europe 5,000 Litres and Up(12)
Glass Lined Reactors, Europe Less than 5,000 Litres(32)
Reactor Parts - Agitator Drives(105)
Reactor Parts - Agitators(5)
Stainless Steel Reactors - Europe 5,000-19,999 Litres(13)
Stainless Steel Reactors - Europe Less than 5000 Litres(67)
Stainless Steel Reactors - Europe More than 20000 Litres(3)
Stainless Steel Reactors 2000 Gallons and Up(5)
Stainless Steel Reactors 500 to 2000 Gallons(13)
Stainless Steel Reactors Less than 500 Gallons(73)
Rectangular Screens(38)
Rotary Screens(24)
Round Screens(38)
Round Screens - Europe(7)
Screen Dewatering(1)
1 1/2" Extruders(6)
10" Extruders(1)
2 1/2" Extruders(7)
3 1/2" Extruders(3)
4 1/2" Extruders(1)
6" Extruders(1)
8" Extruders(1)
Co-Rotating Twin Screw Extruders(14)
Counter-Rotating Twin Screw Extruders(9)
Extruder Screws(11)
Extruder Temperature Panels(10)
Extrusion Line Feeders(12)
Pug Mills - Vacuum Extruder(1)
Rubber Extruders(3)
Cutter Film Densifier(4)
Cutter Guillotine(2)
Cutters/Shredders(15)
Granulator Parts(12)
Pelletizer Parts(1)
Strand Pelletizers(19)
Underwater Pelletizers(9)
Butter or Margarine Machinery(7)
Cooker - Cooler/Bottle Conveyor Type(1)
Cooker, Rendering Type(3)
Fishmeal(5)
Food Extruders(10)
Hollow Screw Cooker Or Cooler(10)
Meat Equipment(8)
Miscellaneous Equipment for Food Processing(34)
Oils and Fats Processing Equipment(22)
Pasteurizers(4)
Rendering Equipment(12)
Vegetable Cutters(3)
Harvestor(1)
Sugar and Pulp Dryers(4)
Sugar Beet Diffuser(3)
Sugar Beet Factory(3)
Sugar Beet Preparation(7)
Sugar Beet Slicer(5)
Sugar Cane Factory(9)
Sugar Cane Preparation(21)
Sugar Centrifuges(21)
Sugar Equipment, Miscellaneous(16)
Sugar Evaporator, Pan, Crystallizer(20)
Sugar Filters(7)
Sugar Pulp Dewatering Press (16)
Bottle Cleaner(2)
Checkweighers(13)
Cottoner(3)
Feeder, Miscellaneous(32)
Feeder, Vibrating Pan(8)
Filler Form Fill & Seal(24)
Filler Form Fill & Seal Liquids(10)
Filler Liquid Gravity(3)
Filler Liquid High Speed(3)
Filler Liquid Pressure Low Speed(7)
Filler Paste - Piston - Pocket(21)
Filler Powder Bag & Box(22)
Filler Powder Capsule - Ampule(9)
Filler Tablet & Counter(5)
Filler Tube(6)
Your Cart is Empty.
Home » » Sheet Extrusion Lines
Stock #21412-2
Used 24" wide 3-roll down stack cooling roll stack with (3) 12" diameter rolls. Includes, Approx. 5' cooling conveyor, rubber to metal pull roll assembly. Chill rolls driven by a 5HP DC motor without drive and pull rolls are driven by a 1HP DC motor but no drive. No pumps or operator controls included.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZP57684-1
Used Johnson 16" diameter X 30" wide three-roll sheet down stack. Pneumatically operated cored chrome rolls, rolls are driven by a silent chain drive, drive gearboxes for both the chrome rolls and the pull rolls operate at 1.0, 2.07, 5.058 and 10.465:1 ratios. Pull rolls are 8" diameter X 30" wide and have been newly recovered. Pull roll is driven by a 3 HP, 180 volt DC motor through a gearbox. Drive motor for the chrome rolls not included.
Location: Midwest USA
Stock #ZP58170
Used Cincinatti Milacron 2-roll cooling roll stack including unwind. Also included in package is the following: - 18"X34" wide 2-roll chrome plated cooling rolls - Driven by 5 HP DC motor Rolls are cooled via (3) 5 HP pumps with heat exchangers. Has (2) rubber coated pull station, 18" diameter X 34" wide. Pneumatically operated and driven by same motor as above chrome rolls. Includes unwind stand for 40" diameter rolls.
Location: Midwest USA
Stock #715-469CR
Used 34" wide Cincinatti Milacron 2-roll sheet take-off with 34" face X 18" diameter rolls. Rolls are mounted in a vertical stack arrangement. Chromed and cored rolls with rotary unions, silent chain driven with 5 HP, 1750 DC motor through a Koellmann gearbox with 18.131:1 ratio, SCR motor controller, pull roll stand with 4" diameter X 34" wide rubber roll driven by a 1 HP DC motor with SCR controller with idler roll unitized with temperature control skid, electrically heated with 9kW Watlow heaters through shell and tube heat exchanger with pumps and reservoir. Previously used as extrusion coating cooling station for foam sheet in a laboratory atmosphere.
Location: Midwest USA
Stock #ZP61339
Used 36" wide Davis Standard sheet extrusion line consisting of the following: - Used Davis Standard sheet extrusion line consisting of 4.5" Davis standard 34:1 L/D extruder driven by a 250 HP DC motor with SCR control. Has electrically heated water cooled, vented (plugged) barrel with hes model 301 controls. - Has Xaloy EH-45 screen changer with hydraulic pumping system - 15 HP gear pump - 36" wide EDI flex lip model H40 sheet die - Davis Standard/Marshall & Williams 3-roll stack with 16" X 36" wide polished chrome cored rolls and silent chain drive with hydraulically actuated closure. - (4) advantage Sentra temperature control units.
Location: Midwest USA
Stock #ZP60327
Used 40" wide Johnson sheet extrusion line consisting of the following: - 4.5" Johnson 24:1 L/D vented extruder with water/air cooling on barrel. Includes DC motor with Pacemaster DC drive and 11.1:1 gearbox ratio. Includes temperature control panel and Beringer model NC-45 compact screen changer. - Downstream includes 36" wide flex lip extrusion die with restrictor bar. Includes 18" X 40" 3-roll chill roll stack, steel roll conveying system, and chill roll pumps and heat exchangers. Also includes Johnson rubber pull roll assembly and Wysong shear. - Also included is 1994 Larkin 60 ton chiller.
Location: Midwest USA
Stock #ZP60105
Used 40" wide Sterling co-extrusion sheet line. reconditioned in 1998-2000 to produce films of synthetic paper 4-20 mils thick. Line consists of the following: - 3.5" Sterling 30:1 L/D extruder driven by a 125 HP DC motor with Allen Bradley series "B" SCR controller, 440 volt AC input. Extruder is electrically heated and water cooled including closed loop water cooling system and side vented (plugged) barrel. With 14/1 gearbox ratio. - Maag melt pump currently mounted on 3.5" extruder. - 2.5" Sterling co-extruder, 30:1 L/D with 13.351 gearbox reduction and 50 HP DC motor with SCR controller. Has electrically heated water cooled barrel with closed loop water cooling system. - 2.5" Entwhistle co-extruder, 30:1 L/D with non-vented barrel, driven by a 50 HP Reliance DC motor with SCR control. Each of the above extruders are equipped with 3.5" MGB Engineering screen changers with oversized 3HP hydraulic pumping system for all three changers. - Mann and Hummel 4-component resin volumetric dosing system for the 3.5" extruder and resin loaders for the 2.5" co-extruders, including vacuum pump. - Co-extrusion feed block for the three extruders and a Cloeren 1200mm (47") epoch III flex lip sheet die with lip opening .000"-.050" and lip slot with 1120mm (44"). - 40" wide Sterling hydraulically loaded chill roll stack including hydraulic pumping system. Downstack operation including temperature control package with heat exchangers and pumps and rubber pull roll assembly. - NDC model 6100TC thickness gauging system with NDC model 103 sensor probe. - Solo systems 2-sided Corona treating station for 40" webs and Softal generator type 3009RV for up to 3.5kW. - 40" Egan single turret winder for 36" diameter rolls including dancer and lay-on roll. - Rosenthal 48" sheeter, new 2000 for sheeting 3-20 mils synthetic paper includes (2) unwinders for rolls 36" diameter X 500 lbs each on 6" cores. Sheeter includes heavy duty score cuts slitting for maximum 4 slits and speed 23-24 meters per minute. Has output conveyor 36" long. Sheeter is currently working inline at this time. Still installed as operated.
Location: Mexico
Stock #20773-1ST
Used 18" X 41" Welex 3-roll sheet extrusion stack. Model 18X41RHSL, serial #4750. Rolls are silent chain driven, and air actuated nipping pressure with 8.5" OD cylinders. Has 42" wide rubber to metal 6" diameter pull roll package driven by 1 HP motor and includes dual razor blade slitting station. Includes temperature control pumping package, operator control panel.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #9323-07
Used Davis Standard sheet take-off unit consisting of (3) 48" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter. Top roll is tungsten and the middle and bottom are chrome. Top and bottom rolls are air actuated. Rolls are driven via silent chain and sprocket by a DC motor through a gearbox. Unit has a 3-zone built-onto-frame temperature control system with three 3 HP pumps, three heaters, and three heat exchangers. Included is an idler roll conveyor between the cooling and polishing stand and pull rolls with razor slitting station. Pull rolls measure 48" face X 8" diameter and are rubber covered. Top roll is air actuated. Pull rolls are driven by a DC motor through a gearbox. With controls. Manufactured 10/1993. Serial #N9057, S.O.# 50742.
Location: Midwest USA
Stock #ZP61834
Used Processing Technologies Inc. 3-roll downstack Model 5024 24" diameter X 50" wide lower 2 chrome rolls Upper roll is 12" X 50" All chrome rolls cored for cooling Rolls are hydraulically operated and powered by a 7.5 HP DC motor via silent chain drive Control Techniques Mentor II DC drives for stack and pull roll station Pull rolls pneumatic operation and powered by a 5 HP DC motor Cooling via 3 X 10 HP pumps into heat exchangers Serial no. 297-CRS Manufactured 2/2000
Location: Midwest USA
Stock #9323-10
Used Marshall and Williams sheet take-off unit consisting of (3) 54" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter and are ceramic coated. Top and bottom rolls are air actuated. Rolls are driven via silent chain and sprocket by a DC motor through a gearbox. Unit has a three-zone built-onto-frame temperature control system with three pumps, three heaters, and six heat exchangers. Included is an idler roll conveyor between the cooling and polishing stand and pull rolls with razor slitting station. Pull rolls measure 54" face X 8" diameter and are rubber covered. Top roll is air actuated. Pull rolls are driven by a DC motor through a gearbox. Serial #4885. S.O.#27223, MSO #27221.
Location: Midwest USA
Stock #ZP60422
Used Sterling sheet extrusion line consisting of the following: 4.5" Sterling 36:1 L/D single screw extruder driven by a 200 HP DC motor with SCR control. Extruder has 78" centerline. Previously used extruding horizontally into chill roll chrome nip roll. Extruder is double vented (1 vent presently plugged) and includes vacuum system and closed loop water cooling system for barrel heat/cool. Includes (2) spare screws. 4.5" Sterling hydraulic plate screen changer with hydraulic power pack. 15 HP Luwa mill pump. (2) sheet extrusion dies as follows: - 66" Johnson flex lip sheet die with 45 degree restrictor bar and removable lower lip supplying .001 through .250" gap. - 60" EDI H75 sheet extrusion die for .001 through .075" gap. 66" wide Sterling sheet cooling roll take off with (4) cooling/polishing rolls mounted in a cast line configuration. Extruder therefore extrudes downward into (2) 8" diameter chrome rolls which then "S" wraps through (2) 14" diameter chrome rolls. All chrome/polishing rolls are individually driven by a DC motor with SCR controls. Has idler roll conveyor and (2) rubber pull roll haul off. Includes spare chrome/polishing rolls as follows: - (2) 8" diameter and (2) 14" diameter (2) dual zone oil temperature control units (4 zones total) for use with chrome/polishing rolls. Wysong 72" shear model 1272. Sheet stacker for use with shear for automatic stacking of extruded cut sheets. Conair desiccant dryer withe 4000 lb hopper. Equipment reported completely rewired and some items rebuilt and used sparingly after rebuilding.
Location: Canada
Stock #ZP63136
Used PTI 78" wide sheet line (2003) last used on PET sheet consisting of the following: A) PTI Model 6000 6" 36:1 L/D extruder having an 8-zone electrically heated, water cooled (closed loop) and vented barrel at a 64" center-line height. Gearbox is a Flender model SZNF 390. Has a 15.4:1 reduction ratio rated for up to 986 HP. Has a Flexpak 3000 500 hp SCR controller but no motor or screw included. Control panel has 25 zones of Eurotherm controllers. Serial #3767/10082. Manufactured 6/2003. B) Dynisco model EH-60 screen changer having (2) nominal 6" diameter breaker plates. Includes 2 hp hydraulic power pack. C) Maag model 90/90 melt pump with 30 hp drive system, controls, and model 6000 static mixer. D) Cloeren 70" Auto-Flex sheet die. 1" x 4" back center feed entrance. Serial #77831-2129. Manufactured 4/2003. E) PTI model 7824 down stack roll stand having (3) rolls mounted in a vertical arrangement consisting of 24" diameter middle and bottom chrome plated rolls and a 16" diameter chrome plated top roll. Hydraulically actuated gapping. Rolls are driven by a 10 hp AC motor through gearboxes via silent chain and sprockets. Includes built onto frame temperature control. System (missing one pump), idler conveyor, dip coating station, slitting station and pull roll stand with 78" x 8" diameter rolls. Serial #3354R. 480/3/60 volt, 175 amps. F) 78" Parkinson turret winder having (4) winding positions. Each station is driven by a 5 hp AC motor. Includes (3) winding shafts. Missing gearbox on turret. G) Previously running PET. Line was originally factory designed to run PET, PP and PS at 2500-3000 pounds an hour.
Location: Midwest USA
Stock #836-03 Sold
Used including the following: - 1.5" Killion 30/1 L/D vented extruder with electrically heated air cooled barrel. Extruder includes (3) 2 stage screws, (2) single stage screws. Driven by 15 hp DC motor with 11.2/1 gear ratio. Has standard top center feed, stainless steel hopper, and base mounted 8-zone temperature control panel with Eurothermmodel 94C instruments. Includes Sterlco 9kw water heater for screw rotary union. Previously used on 1 mil/20 mil product.Killion laboratory sheet extrusion line - 8" wide Masterflex sheet die with back center feed. - Downstream includes 5" o.d. x 8" wide Killion 3 roll sheet stack. Has (2) ceramic rolls installed and (1) polished chrome roll. Spare rolls include (1) matt finish, (2) rubber rolls, (2) chrome rolls. Each roll equipped with Sterlco 9kw temperature controller, 230 volt AC input. Chrome rolls are driven by 2 hp motor. Downstream also includes: Razor edge trim slitting station, Auxillary unwind for extrusion coating capability with 3" air shaft and control, Single position winder with 6" air shafts and control. - Has Allen Bradley touch screen operator controls.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21437-01 Sold
Used 10" wide Bronco 3-roll chill roll stack with 3 chrome plated chill rolls, each with rotary unions. Mounted on common frame with rubber/metal pull roll assembly. Has VS DC motor and motor control. 20/1 gear box with multiple sheeve diameters supplying 2/1, 1/1, 1/3 capability. Estimate sped 61 FPM, 122 FPM, 361 FPM.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZP54282-2 Sold
Used 1200mm wide Toshiba multi-layer sheet extrusion line previously used for PP/PS, 1200mm maximum width, .2-1.0mm maximum thickness. Line consists of (2) Toshiba 90mm extruders, 32:1 L/D, model SW120 screen changer, 1600mm sheet extrusion die (63"), polishing roll stand 1800mm width (70.8") X 300mm diameter (12"), 1600mm sheet cutter, and 1500mm turret winder.
Location: Japan
Stock #20740-2 Sold
Used 12" x 30" wide Davis Standard 3-roll sheet stack. Model F8082, SO #49606C. Includes 3 rolls each 12" OD and are driven via silent chain and sprockets by a DC motor. Has 10' long idler conveyor, pull roll stand, and shear. Includes hydraulic pump for cylinders on stack, and 36 kW Mokon oil unit for rolls. Also includes (2) spare chrome rolls, (3) spare silicon rolls, and (3) spare etched hair cell rolls.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21176-ST Sold
Used 36" wide x 16" diameter Battenfeld Gloucester inclined style hydraulically loaded and driven 3-roll chill roll stack. Includes hydraulic pump for roll pressure. Top & bottom roll are polished chrome plated while center roll is a matte finish. Includes (3) Sterling temperature control units, cooling conveyor with edge trim razor slitting station and pull roll stand. Also includes (2) spare chrome rolls, (2) spare rubber rolls and (2) spare damaged chill rolls.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #20773-1 Sold
Used 41" wide Welex sheet extrusion package consisting of the following: - 3.5" 30/1/ L/D Welex extruder. Model 3.5-30:1LHSV, serial #4746, new 05/88. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extruder is driven by a 150 HP DC motor with SCR control, has Lufkin change gear gearbox. Extruder is equipped with a static mixer and co extrusion block. Has 55" centerline height. - Beringer screen changer with hydraulic pump. - Welex 56/56 melt pump with 20 HP motor, serial #8789. - 34" flex lip die with choker bar and replaceable lower lip. - 18" X 41" Welex sheet extrusion stack. Model 18X41RHSL , serial #4750. Rolls are silent chain driven, and air actuated nipping pressure with 8.5" OD cylinders. Has 42" wide rubber to metal 6" diameter pull roll package driven by 1 HP motor and includes dual razor blade slitting station. Includes temperature control pumping package, operator control panel. Previous use high impact polystyrene in a laboratory setting.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZP63310 Sold
Used 42" wide Welex co-extrusion sheet line consisting of the following items: 4.5" Welex 30/1 L/D single screw extruder with 72" centerline height, driven by 300 hp Blue Max AC motor with ABB VFD controller. Has vented and plugged barrel, air cooled. Has 7/1 gear ratio, 5/1 compression screw, and screen changer with hydraulic pumping system. 2.5" Welex 30/1 L/D non-vented single screw extruder driven by 60 hp Blue Max AC motor with ABB VFD drive. Welex 7070 melt pump with approximatly 15 hp motor. AB co-ex block, with static mixer. 40" wide Allied die with external deckle, 45 degree restrictor bar, with replaceable lower lip supplying .001 - -.200 gap. Mounted on stand. With recent rechroming for use on PET and never used since. 18" x 24" x 24" x 42" wide Welex 3-roll stack with water cooling package, downstack operation, and includes silicone coat station, additional roller for 3/4 wrap on the bottom roll for use with PET sheet, slitting station and pull roll assembly. (2) Welex jumbo roll winders with approximately (5) additional carts. Each extruder equipped with a Maguire blender, WSB 200 2-component on the 2.5" extruder, and WSB 900 4-component on the 4.5" extruder.
Location: Northeast USA
Stock #867-L Sold
Used TSL sheet/lid thermoforming downstream only. Still installed as operated until April 20,2022. Line consists of the following: - end fed sheet extrusion die, approximately 46" wide - TSL Model 500 rotary thermoformer approximately 44" wide including (2) Sterlco temperature controllers - TSL Model V.30 trim press.
Location: Northeast USA
Stock #21356-2 Sold
Used 48" Wide Sheet Line Consisting Of: (1) Black Clawson 6" diameter single screw extruder, model 600 FXTR, Serial# 2498, order# L15229600. , approximate 24:1 L/D ratio, electrically heated, water cooled non-vented approximate 5 zone barrel with pump, tank and heat exchanger. Water cooled feed. Driven by a 250hp, 460 volt, 1780 rpm motor thru a Flender gearbox, ratio 14.175 to 1. Approximate 44" centerline height. Control panels and PLC panel. Process Control XL Series gravimetric continuous blender feed system with controller. (1) Maag Extrex gear pump, model EX70, serial# 50141229/0020, built 2015. Driven by a 10hp gearmotor, mounted on a stand. 1) Sterling 24KW temperature control unit, model M2B2016-U1, serial# 34J0409. (1) Sano Black Clawson 3-Roll Stack. Serial # 50 551 93. (3) Approximate 20" Diameter x 48" wide pneumatically adjustable chrome plated cored rolls. Rolls chain driven by a 7.5hp gear motor. Includes a control panel. (1) Cooling skid with approximate 10' long roller cooling conveyor, (3) Thermal Care AquaTherm RA series temperature controllers, model RA095004. (1) Sano Black Clawson pull roll stand with (2) approximate 8'' diameter x 48" wide pneumatically adjustable rubber rolls, driven by a 2hp gear motor. (1) Chicago Electric rewind roll stand, approximate 46" wide with tensioning rolls, operator panel and control panel.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #867-L-BROWN Sold
Used Davis Standard/Brown sheet extrusion/lid thermoforming line. Line is still installed as operated until April 2022. Line consists of the following: - 6" Davis Standard 24/1 L/D 400 hp extruder including slide plate screen changer and melt pump - 60" wide Autoflex sheet extrusion die including controls and thickness gauge for sensing thickness of the sheet - 12" x 64" Davis Standard 3-roll chill roll stack including pull roll assembly - Brown Model MC5500 52" wide thermoformer for maximum 7" draw including top and bottom Calrod heat, Servo sheet index, air actuated top platen and toggle bottom platen. - TSL Model V5.0HD trim press with controls. Still installed as operated. Separately available is a Maguire 4-component blender and 56" wide Cumberland scrap grinder.
Location: Northeast USA
Stock #867-27 Sold
Used 64" wide Davis Standard 3-roll chill roll stack. 64" x 12" o.d. chrome rolls with rotary unions driven by 3 hp gearhead motor. No cooling conveyor included. Includes 64" wide rubbber pull roll assembly. No cooling conveyor and NDC gauge shown in photos not included.
Location: On Site at Perry (Hainesport, NJ - USA)