35000 BPH GLASS BOTTLE FILLING LINE
Stock #RG9958
Used glass bottle filling line with capacity of 35,000 bottles / hour. Line includes the following equipment:
- KHS ROLA-TRONIC-H filling machine made in 2007 with capacity of 35,000 bottles/hour. For bottles sized 0.5l longneck, 0.33l and 0.66l
- KRONES TOPMODUL K 407-125 1800-36-600 labeling machine made in 2007 with capacity of 45000 bottles/hour. For bottle sizes 0.5l longneck (front side, rear side and ring labeling), 0.33l (front side, chest side,and rear side labeling), 0.66l (front side, chest side and rear side labeling).
- KISTERS Combiline 420/70 packing machine made in 1999 with capacity 40000 takt. Combined machine for feeding and wrapping.
- Shrink tunnel ST-II.600/12 made in 1999.
- Palemat LORD PK1 BUN2 30 0959/1800 made in 1999.
- Conveyors with total length approximately 50m made in 1999 .
Location: Europe
Add to Cart
View Details
16000-18000 BPH PET BLOW MOULD & FILLING LINE
Stock #RG1000
(2) Used PET blow mould and fill bottling lines.
Line one has a capacity of 16000 to 18000 bottles per hour for 1.5 and 2 litre bottles of concentrated non-carbonated soft drinks.
Line two has a capacity of 16000 to 18000 bottles per hour for 1 litre bottles of concentrated non-carbonated soft drinks.
Equipment list on request.
Location: United Kingdom
Add to Cart
View Details
KRONES BOTTLE FILLING LINE
Stock #881-116
Used Krones Bottle Filling Line Consisting of the following:
- Krones 20-station glass bottle rotary filler with stainless steel balance tank and capping station
- Krones Starmatic bottle labeler, s/n 92-355, with infeed and outfeed conveyor and stainless steel belt
- Stainless steel product conveyor from Krones filler to Krones labeler, with approximately 3" wide plastic belt, guides, inline spray and dry tunnels and motors and drives
- Stainless steel glass bottle orientator mounted on stainless steel frame
- (3) Stainless steel glass bottle orientor change runs with stainless steel wall-mounted rack
Location: Northeast USA
Add to Cart
View Details
10,000 Bottles/Hour Chinese-Made Filling Line
Stock #RG9991
Used Chinese-made filling line with capacity 10,000 bottles / hour. Previously used for Carbonated Soft Drinks (CSD), flavoured water and mineral water.
Main equipment inluded:
- Blow moulding machine 6 cavity rotary, HP compressor, air conveyor, filler-rinser 40 valve, capper 8 head, mixer, dryer. Filler-rinser-capper block covered with glass doors, overhauled in 2020 before re-starting line, installed new valves (filler and rinser).
Location: Asia
Add to Cart
View Details
1600 - 2500 BPH, Nagema Automatic Filling, Capping, and Line
Stock #HG62375
Used filling and capping line last used for wine. Reportedly capable of filling approximately 1600 - 2500 BPH into 750 ml glass bottles. Equipment includes:
- Hills of Hull model Rotaclean machine for bottles wash out
- Nagema filling machine. Machine is equipped with (24) filling stations
- feeder for caps and closing device
- conveyors
Total length of line is approx. 12 m, the highest point is approx. 3 m height.
Location: Central Europe
Add to Cart
View Details
17,000 Bottles / Hour Filling Line for 0.2 and 1 Litre PET Bottles
Stock #RG9828
Used PET filling line made in 2000 and shut down in 2019. Line can fill juice, water or CSD (carbonated soft drinks) into 17,000 bottles/hour of 200ml bottles or 6000 bottles/hour of 1 litre bottles. Major equipment includes:
- (2) syrup tanks, 4 tons each.
- (2) mixing tanks 6 tons each.
- ROSSI CATELLI pasteuriser, plate heat exchanger with capacity 6 tons/hour.
- SASIB homogenizer manufactured by GIA.
- SASIB rotary filler 32 valve, equipped with HEPA filter to provide air pressure and prevent microbial contamination. Capacity 17,000 bottles/hour for 200 ml bottles or 6000 bottles/hour for 1 litre bottles.
- KRONES labeling machine, with capacity 18,000 bottles/hour onto 200ml bottles, or 6000 bottles/hour onto 1 litre bottles.
- SMI shrink machine with capacity 1500 package/hour in each size.
- Air Conveyors and regular conveyers.
- SIDEL blower machine.
- SIDEL Unscramble with air conveyor bottle transfer.
- Chum Power Blow Moulder machine.
- Atelier Francois air compressor with capacity 40 bar. Made in 2016.
Location: Egypt
Add to Cart
View Details
18000 Bottles/Hour Aseptic Bottling Line
Stock #RG9008
Used aseptic bottling line with capacity 18000 bottles/hour including unscrambling, aseptic filling, closing and packaging. Major equipment:
- Ampack Ammann FA8 aseptic bottle filler made in 2002 with capacity of 18000 bottles/hour. Fills UHT milk into 100-1000 ml bottles.
- AROL Europak 288 cap applicator made in 2003. Cap diameter 40mm.
- Sleever international sleever / shrinker made in 2002. Formats: 3 X 2 X 1 and 3 X 4 X 1.
More information on request.
Location: Europe
Add to Cart
View Details
18000 Bottles/Hour GEA Procomac Aseptic Filling Line
Stock #AG61887
Used GEA Procomac aseptic filling line for 0.5 LTR and 1.0 LTR pet bottles with the capacity 18.000 bottles per hour.
Scope of supply:
1. Complete process preparation incl. Syrup room, juice reception and CIP station
2. PPS13 SIPA pet preform injection machine
3. SFR12 SIPA blow molder
4. Procomac ACF block incl. Clean room
5. Krones labeler
6. Robopack case packer
7. Robopack stretch film pallet wrapper
8. Procomac palletiser
auxiliary equipment:
1. Water treatment system
2. Steam boiler
3. Compressors incl. High pressure 42 bar compressor for PPS
4. Chiller
5. N2 generating system incl. Storage tanks
last was used for filling juices. Can be used for still and carbonated beverages.
Location: Europe
Add to Cart
View Details
20,000 Bottles/Hour Sacmi Form and Filling Line
Stock #RG9996
Used PET blow mould and filling line with capacity 20,000 bottles/hour. Line includes the following major equipment:
- SACMI SR12 COMBO 12-40-10 blower / filler / capper. Preform tipper & hopper (Made in 2008, refurbished 2018). 12-head blow moulder, 184 preform magazine, 2 sets of change parts 250ml & 330ml. 40-head volumetric flow filler 28mm to 38mm neck, refurbished neck grippers. 10 head Arol capper, hopper elevator, 3 cap sorter feed hoppers for size 28mm, 35mm, 38mm caps.
- Barry Wehmiller VOLUMIX DUO 2 /3 /12, automated drinks mixer, 20,000 litre per hour capacity (2017). Lanxess Velcorin DT 13 S, max dosing rate 20ml/100l, beverage flow 2400-14400 l/h (2012). Heuft Spectrum cap & fill level inspection. Barry Wehmiller VOLUCLEAN CIP, automatic skid mounted system.
- Fuji Seal air dryer knife (2017). Fuji Seal 415X EU sleeve applicator, with inspection & reject station, automatic splice unit, 3 reel feeder. Fuji Seal ST-M shrink tunnel.
- Sacmi Opera 200 RF automatic roll fed rotary labeller, change parts 250ml, 330ml, 500ml, (2008). SMI SK450 P shrink wrapper printed and blank film, with 22 option format selection. SMI heated shrink wrap tunnel, 45 packs per minute capacity. Loma metal detector. Altech case labeller.
- Hartness bottle accumulator, bottle inverter. Pentair 3 tank carbon water filtration plant with pall filters. Innowatech Hyclean mixing & dosing station with bottle steriliser system. 110m of Bottle, pack and tray conveyor, upgraded 2018. Emmeti Logik Wolf palletiser system. Robopac Helix HS30 pallet wrapper.
- Compressors and chillers. AF CE46B 40 bar high pressure compressor, YOM 2003 refurbished by AF in 2019. Hankison compressed air dryer for PET 40 bar pressure. ASKI LCA/E type 1102 PET M chiller (2008). ICS AT/K P2080 chiller (2017).
Location: United Kingdom
Add to Cart
View Details
2000 PET Bottles/Hour Filling, Capping, and Labelling Line
Stock #HG62451
Used filling, capping and labelling line PET made AMT (Slovak republik). Reportedly capable of filling approximately 2000 BPH into 0,3 and 0,7 L PET bottles.
Equipment includes:
- PET blow molding machine
- filling machine
- labelling machine
- heated shrink wrap tunnel
- conveyors AMT
Location: EU
Add to Cart
View Details
20000 Bottles/Hour Chotěbořské Strojirny Filling Line
Stock #HG59650
Used filling bottles from Chotěbořské Strojirny type Rotus 60. Fully automatic line for filling beer bottles of 0,5 liters. Filling machine has 60 pistons and fill handle approximately 20.000 bottles per hour.
Location: Central Europe
Add to Cart
View Details
200000 Litres/Day PET Bottle Filling Line
Stock #RG9403
Used filling line with most equipment made during the 1980s, capacity approximately 200,000 litres/day when filling 1.5 litre PET bottles. Can reportedly also fill into 500ml, 750ml, 1.25l and 2l bottles. Main equipment includes:
- ABM 761 depalletiser made in 1983 with capacity 14,500 bottles/hour.
- O&H uncaser made in 1982 with capacity 24,000 bottles/hour.
- Simonazzi Atlantic 132-203/22-3D bottle washer made in 1982 with capacity 21,000 bottles/hour.
- Crate washer
- Simonazzi Eurostar 80 10 8 filler made in 1984 with capacity 14,500 bottles/hour.
- Simonazzi 80 head filler (spare) with capacity 18,000 bottles/hour.
- Zalkin 10 head capper with capacity 24,000 bottles/hour.
- Arol Euro PK 8H free standing crowner made in 1997.
- Kettner BE 50/C-T caser made in 1984 with capacity 24,000 bottles/hour.
- H&K BSH 2 Palletiser made in 1983 with capacity 14,500 bottles/hour.
- Copeland D8SK2/700X Chiller made in 1989.
- (3) Sulzer Cooling Towers made in 1998.
- Various conveyors.
Location: Africa
Add to Cart
View Details
2500 Bottles / Hour Aseptic UHT PET Bottle Filling Line
Stock #RG1001
Used PET aseptic (preservative-free) UHT bottle filling line with most equipment made between 2013 and 2016. Line is innovative and suitable for preservative-free production and bottling of heat-treatable non-carbonated soft drinks.
Previously used for vitamin drinks, filtered / low fibre juices, tea-based drinks from real leaves and plant based milks / drinks. Filling line has a capacity of 2500 bottles / hour and can fill into bottles sized 0.2 to 1.5 litres (currently filling into 0.5 litre bottles). Equipment includes:
- Semi-automatic PET bottle blowing machine with capacity 1000 BPH.
- Water Treatment System: (Brand BWT) - stainless steel gravel - sand filter. Automatic 2-column continuous ion exchanger Brand: BWT, automatic 2-column. Continuous activated carbon filter.
- Technological water buffer tank, 2550 liters, stainless steel: aisi 316L, with bottom pressure gauge, CIP washer head and connection
- (2) 250 litre, stainless steel, double-walled thermo, oil-heated cooking pots
- (1) 2550 litre mixing tank (Brand: Bonfiglioli), stainless steel: aisi 316L, with bottom pressure gauge, 2 pieces CIP washer head, with connection
- (1) 80 litre, stainless steel, liquid filter (GAF puncture bag)
- 2550 litre product buffer tank, stainless steel: aisi 316L, with bottom pressure gauge, CIP washer head, with connection
- Automatic UHT plate sterilizer machine includes heating and cooling equipment: Capacity: 1250L / H, PLC controlled, sterilization (main equipment: 3 pieces AlfaLaval heat exchangers, Galletti liquid cooler, electric thermo oil boiler) temperature: 60°C - 150°C, holding time: 45 sec, inlet temperature: 15°C, outlet temperature: 5°C - 35°C
- Automatic Aseptic rinsing filling capping 3 in 1 Monobloc: Capacity: 2500 BPH, PLC touch screen controls the whole process, automatic bottle sterilizer, automatic cap sterilizer, pick and place capping system, CIP washer head, with connection
- Capped bottle rinsing equipment with RO (reverse osmosis) water (Brand: BlueClear)
- Bottle drying system with air knives, (Brand: Tardito Machine)
- Cap control system with automatic sorter, (Brand: KEYENCE)
- Automatic Sleeve machine (Brand Scaligera Ulisse 2000) year 2015: Capacity: 2800 BPH, with heat tunnel
- Automatic inkjet printer (Brand: HITACHI)
- Automatic shrink wrapping machine with heat tunnel (Brand: Mondial Pack)
Location: Europe
Add to Cart
View Details
30,000 BPH PET Water Bottling Line
Stock #ZG62977
Used PET Water Bottling Line
Last running up to 30,000 BPH on 500ml PET Bottles 26.67mm caps
Includes the following items
Posimate empty bottle unscrambler
Air conveyor from the bottle unscrambler to the filler infeed (lot)
Linker 72-valve Tri-Block rinser, filler, capper - capper is set for 26.7 mm with Aidlin elevator sorter and electrical panel to be included
Pressureless combiner, single filer
Stainless 4.5” single lane bottle conveyor, nominal 40’ to 60’ in length
Filtec dud detector, appeared to be an FT-50 or FT-100 with reject unit
Combination of stainless 4.5”, single filer/slowdown/take away conveyor and midsized accumulation conveyors, primarily single lane, nominal 100’ to 150’ in length
Sonic air knife system, 2 knifes appear to be 24” in length
Langguth hot glue wrap-around rotary labeler, appears to be 16 or 18 stations with Nordson Pro Blue 4 hot glue
Stainless accumulation bottle conveyor, appeared to be 24” or 30”, nominal 50’ to 60’ in length
SMI SK600 shrink bundler wrap system with 4 chamber heat tunnel, unsupported product, print registration film, wrapping 28 pack, Nordson Pro Blue 7 hot melt
Finished product stainless bottle conveyor, appears to be 15” to 18”, nominal 50’ to 70’ in length
Incline conveyor leading to overhead case conveyor
Overhead case conveyor, nominal 100’ to 130’ in length, leading to palletizer infeed, case metering belt prior to palletizer
Alvey 881 high level bulk palletizer with catwalk and platform, infeed metering conveyor
Full pallet discharge roller conveyor leading from palletizer to wrapper, nominal 20’ in length
Wulftec fully automatic pallet wrapper with Infeed and discharge pallet conveyor, appears to be 10’ of infeed, 5’ at wrap area, 15’ discharge
Location: South USA
Add to Cart
View Details
3000 Bottles / Hour Filling Line Currently Filling 2 Litre PET Bottles
Stock #RG9880
Used PET filling line with capacity 3000 bottles per hour of 2 litre bottles. Line could reportedly fill smaller bottles at a capacity of up to 18,000 bottles per hour.
Change parts for different sized bottles can reportedly be made and purchased. It has previously been used to fill carbonated juices, carbonated water and filtered water into 2 litre bottles. Equipment includes:
- Capper
- Carbonator
- Compressor with built in dryer
- Mixer/charge tank
- Filter to holding tank
- (3) 1000 litre s/s tanks
- (1) 60 litre tank with pump
- Slat conveyers
- Numerous pipes and fittings as well as inline pneumatic valves
- (3) pumps plus (3) inline cartridge filters
- Shrink tunnel
- 20,000 litre holding tank
- Chiller plant
- Cables
- Ink jet printer
- 28 head rotary filler made by Crown
- Steel structure for the (3) s/s tanks
Location: Africa
Add to Cart
View Details
3000 Bottles / Hour Form and Filling Line for 0.335, 0.5, 1.0, 1.5 and 2 Litre PET Bottles
Stock #RG9850
Unused form and fill PET bottle filling plant with water purification equipment made by Norland in 1996. Plant is unused and is stored in (2) containers..
Fill capacity is up to 3,000 bottles/hour for bottles sized 335ml, 0.5l, 1.0l, 1.5l and 2l. The line also includes equipment to purify water from spring or borehole and to turn it into bacteria free drinking water.
Equipment Includes:
- Blow mould equipment (moulds are not included).
- Water filling line - rotating table, bottle rinsing unit, filling unit, capping/labelling units, date coder, cap tightener, conveyors, shrink foil wrapper / tunnel.
- Raw water intake and treatment system.
More details available on request.
Location: Europe
Add to Cart
View Details
3500 Bottles/Hour Krupp/Kuggler/Krones PET Bottle Forming and Filling Line
Stock #ZS60990
Used Krupp / Kuggler / Krones 1 L PET bottle forming and filling line. New 1996. Consist of the following equipment: PET blower, manufactured by Krupp CORPOPLAST in 1996, capacity 3500 BPH, 4 moulds; filling machine type Kugler with 8 linear heads, Volumetric filling, capacity 4000 BPH, with product buffer of 200 L; capper type Kugler with vibration head, only push on caps, capacity 4100 BPH; labelling machine, with precut labels, Krones Rotina K47, capacity 4500 BPH with cold adhesive Syntac 6834; shrink wrapper, format 2X3 bottles, 420X0.06 mm shrink film, capacity 5000 BPH. Pneumatic bottle conveyor. Line have approx. 60000 running hours. Used for edible oil. Suitable also for others products - still water, non-carbonated soft-drinks, lower viscosity fruits / vegetables juices.
Location: Europe
Add to Cart
View Details
40,000 Bottles/Hour PET Filling Line for 1.5L Bottles
Stock #RG1017
Used incomplete PET bottle filling line with capcaity 40,000 bottles/hour of 1.5 litre bottles. Remaining equipment includes:
- Blow moulding machine (without moulds), made by Krupp Corpoplast in 1996.
- Preform transfer conveyors made be Cevinox.
- Preform tipper made by Cevinox in 2000.
- Diverter, Fege Traintonic 1/6, made in 2009.
- Elevator conveyor, Ambaflex Spiralveor SVX-2/400, made in 2009.
- Palletizer, Acmi Faster 4I, made in 2001.
Items available separately.
Location: Europe
Add to Cart
View Details
4000 Bottles/Hour Italian Filling Line
Stock #XAG61884
Used Italian filling line with the capacity 4000 bottles per hour, bottle size 0.5 liter. Line is equipped with washer, filler, caper and labeler. This line was in operation for 18 month. Previously used for vodka, reported that can be used on various noncarbonated liquids. Additional information on request.
Location: Europe
Add to Cart
View Details
500-5000 Bottles/Hour Filling, Capping, and Labelling Line
Stock #HG59709
Used filling, capping and labelling line last used for beer. Reportedly capable of filling approximately 500-5000 BPH into 500 ml glass bottles. Line was replaced with new line and now is in storage. Equipment includes:
- machine for bottles wash out
- filling Monoblock Chotěbořské STROJÍRNY model Veral 15 P-5. Machine is equipped with (15) filling stations, feeder for crown cap and (4) capping rollers. Suitable for bottles 140-340 mm high and 55-90 mm diameter.
- labelling machine - for 3 labels - front, back, neck.
- inkjet printer domino codebox 2 auto
- conveyors
Location: Central Europe
Add to Cart
View Details
5500 Bottles/Hour All-Fill Filling Line
Stock #AG61854
Used filling line for filling chocolate milk in to 1 liter bottles. Filling capacity 5500 bottles per hour. Currently machine setup for 1 liter bottle size but originally can be used from 0.250 liter up to 1 liter.
Line includes following main equipment:
bottle sorter Fozimt (arranging bottles on conveyor belt)
filling machine All-Fill (5,500 liter bottles per hour / 4 Formatim / air filtered / 16 filling heads flow counters / 8 main pluggs)
disinfection and flushing system
cap applicator
Krones labeling unit
bottle shrinking and packing unit by Dimac
robot pelletizer by Euroimpianti (able to assume surfaces , arrange packaging and place carton + buffers cartridges and cardboard surfaces)
stretch pelletizers by Robopac
air conveyors (feeding system)
other conveyor systems
elevator that download full surface
Location: NORTH AFRICA
Add to Cart
View Details
85 Bottles / Minute PET Filling Line
Stock #RG2098
Used PET filling line with capacity of 85 bottles / minute installed 2015-2017. Line includes the following equipment:
- Technica bottle divider;
- Finpac roll-fed labelling machine;
- Finpac label splice detecting system;
- R.A.Jones electrical panel;
- CIP support ring;
- Fogg capper;
- Stainless steel platform;
- Intouch client PC for labeller - HP;
- Conveyors;
- Dawson debagging machine with capacity 10,000 bottles / hour for 2.85l bottles;
- Fogg filling machine with capacity 85 bottles / minute for 2.85l bottles;
- Technica packing machine (crate packer / palletiser) with capacity 85 bottles / minute for 2.85l bottles.
Previously used to fill PolyBottles with dairy and laban products.
Location: Saudi Arabia
Add to Cart
View Details
9000 Bottles/Hour Sasib Aseptic Filling Line
Stock #RG8693
Used SASIB aseptic filling line for 0.5 and 1.5 litre pet bottles reportedly made in year 2000. Line includes:
- SASIB Manzini syrup room with capacity 9,000 litres / hour
- SASIB Manzini SMN 3 pasteuriser
- SASIB Simonazzi linear ASFS 24/24/8 rinser - filler with capacity 6,000 bottles / hour
- SASIB Simonazzi Starblend premix
- ACS asp aluminium seal applicator with capacity 6,000 bottles / hour
- ft system level control
- AROL pk 8T capper with capacity 16,000 bottles / hour
- SASIB conveyors to the labeller
- SASIB OXE labeller, wrap-around label, 12,000 bottles / hour
- ft system label check
NB: no blow moulder or equipment for packing / palletizing included. Only suitable for non-carbonated beverages.
Location: Europe
Add to Cart
View Details
Bottling Line made by Machinery Automation
Stock #RG2108
Semi-automatic bottling line with only 12 months of use. Made by Machinery Automation in the UK with a capacity of 2400 bottles / hour. Last used for tea based cocktail drinks.
Equipment includes:
- Compact 4-head filler with capcacity 1500 - 3000 bottles/hour, fill nozzle diameter 8mm (6mm optional), power 220V 50Hz 250W, air requirement 0.3-0.4 MPa.
- Compact screw capper with cork press option, capacity up to 2400 bottles/hour. Suitable for screw cap, trigger spray, fomer, dropper, pre-formed ROPP. Cap diameters 18-70mm, bottle height 60-270mm.
- Compact labeller with capacity up to 3000 bottles/hour. Label dimensions: length 25-300mm, height 15-140mm. Product size: diameter 30-140mm, height 25-350mm.
- Desktop capsule heat shrink machine suitabloe for shrinking PVC, PP and POF films. Working speed 1-15 pieces/minute, bottle heights 200-350mm, bottle diameters 70-80mm.
- In-bottle 9kW pasteuriser. Fits approximately 180 x 300ml wide based bottles.
- Air compressor for use with filler and capper.
- 500 litre tank.
- Heat shrink capsule machine.
More equipment specifications available on request.
Location: United Kingdom
Add to Cart
View Details
Bottling Plant, Form and Fill with Capacity 6000 bottles/hour
Stock #RG9686
Used form and fill bottling line with capacity 6000 bottles/hour, made in 2010 by AMT Slovakia and shut down in November 2018. Equpiment includes:
- Filler made by AMT Slovakia with capacity 6600 bottles/hour (0.5l bottles), 6000 bottles/hour (1.5l bottles), 5500 BPH (2 litre bottles). 36 valves, 67,304,905 units produced. For non-carbonated water and juice. Cap size 30mm. Reportedly possible to adapt for CO2.
- Packaging machine made by Giemme Thermo Packaging Machinery, Italy.
- Label machine made by Accraply Trine with capacity 8000 bottles / hour.
- Palletising Machine made by Progometals with capacity 1 pallet / minute.
- (3) Blowing machines made by AMT Slovakia with combined capacity 7500 bottles / minute.
- Chiller made by MTA, Italy.
Note that equipment has now been dismantled and put into storage.
Location: Europe
Add to Cart
View Details
Can Filling Line made by Cime Careddu with Capacity 2000 Cans/Hour
Stock #RG2070
Used canning line made by Cime Careddu in 2016 with capacity approximately 2000 cans/hour for 330ml cans. Previously used for craft beer, equipment was used regularly until demand reduced during Covid pandemic in 2020 when line was shut down.
Line includes the following main equipment:
- Cime Careddu Monoblock Diamond 6/1.
- Converging feed conveyor.
- Date stamp conveyor with ink jet dating machine.
- Can rinsing conveyor.
- Can filling, CO2 (for gas required liquid), sealing (main machine)
- Discharge conveyor
Location: United Kingdom
Add to Cart
View Details
Canning Line with Capacity 1000 Can/Hour
Stock #RG1080
Used canning line installed in 2016 with capacity up to 1000 cans/hour. Capable of filling 250, 330 and 500ml cans. Line includes the following equipment:
- Automatic can washing machine with loading table;
- Isobaric filling and sealing machine with defoaming equipment;
- Can dryer;
- Sleeve shrink label machine;
- Can level sensor machine;
- Semi-automatic film shrink wrap machine;
- Inkjet printer;
- Conveyors.
Location: United Kingdom
Add to Cart
View Details
Filling Line Suitable for Glass Bottles, PET Bottles and Cans
Stock #RG2040
Used filling line made by Eurostar in 2012 that is suitable for filling vegetable oil into glass bottles (sized 250ml, 500ml, 750ml, 1l) and PET bottles (sized 500ml, 1l, 2l, 3l, 5l).
Formats possible with this line are as follows:
- Glass Dorica Bottles: 200ml, 500ml and 750ml. Also possible with the purchase of changes parts (not available with this sale) 1 litre bottles.
- Glass Marasca Bottles: 250ml, 500ml and 1 litre. Also possible with the purchase of changes parts (not available with this sale) 750ml bottles
- Glass Bertolli Bottles: Possible with purchase of change parts (not available with this sale) 250ml, 500ml, 750ml and 1 litre bottles.
- PET Bottles: Possible with purchase of changes parts (not available with this sale) 500ml and 1 litres bottles.
The capacity for glass and PET bottles is approximately 6000 to 7000 bottles / hour.
The line has reportedly worked very few hours and is currently conserved and maintained but not in use.
Location: Europe
Add to Cart
View Details
Glass Bottling Filling Line with Capacity 30,000 Bottles/Hour
Stock #RG9575
Used glass bottle filling line with capacity 30,000 bottles/hour. Line last used for carbonated 12 ounce (355ml) long neck beer bottles. Line includes the following equipment:
- ABC 320 box erector
- Indcon bulk bottle depalletiser
- Hartness 825 drop packer
- SBC tri-block rinser/filler/crowner made in 2007: SBC 72 station rotary rinser, SBC 84 valve isobaric filler, Arol 18 head crimp crowner. (Capped with steel crimp crowns.)
- SBC bottle line tabletop conveyor
- Case and box conveyor
- Heuft bottle inspection - post filler
- Heuft bottle inpection - post labeller
- Krones topmatic labeller
- Videojet laser box coder
- Videojet laser bottle coder
- Manville Ruff Rider six pack erector
- Woodland MDM case palletiser
- Wulftec WCRT-125 automatic pallet stretch wrapper
- Pearson stuffer
- Top sealer
Location: USA
Add to Cart
View Details
Set of two Filling Lines for both PET and Glass bottles
Stock #RS61672
Used two carbonated beverage filling lines.
The first line is Krones / Kosme PET bottle forming and filling line reportedly
made in 2006.
Suitable for the following sizes: 0,25L, 0,33L, 0,5L, 1,25L, 2L. The capacity
of forming 3000-5000 BPH, the capacity of filling 5000-6000 BPH. Last used on
beer.
The second line is a 0.5 LTR glass filling line, aluminum screw caps,
reportedly made in 2006. Last used on wine. Both lines are connected to one
labeler. In the current setup configuration, it is possible to run only one of
the lines at a time.
Also includes a syrup room, (3) Kaeser compressor, systems of water
preparation, and Co.2 preparation.
Location: EUROPE
Add to Cart
View Details
Used Aseptic Galdi Filling Line with Capacity 5000 Cartons Per Hour
Stock #RG2092
Used Galdi RG250 UCS automatic gable-top carton filling machine, made in 2007 with a capacity of 5000 cartons/hour.
- Packing disinfection H2O2, aseptic-hot air and laminar flow.
- Fill volumes: 250, 500, 750 and 1000ml
- Includes Mariani tray packer
- Reported to have operated for only 13,200 hours.
Location: Europe
Add to Cart
View Details
Vegetable oil filling line with capacity of 550 ltr/hour
Stock #ZS63379
Used vegetable oil filling line IFAMENSA type М4/5-TR1 with the approximate capacity of 550 liter per hour. The filling line is suitable for PET bottles, glass bottles, and cans. The labeler is suitable for round and square labels, not for wraparound labels. Reported filling range capacity is 0.25 ltr, 0.5 ltr, 0.75 ltr, and from 1 ltr – 5 ltr. Dates from 2011 and has only worked a few hundred hours.
The filling line consists of the following:
1) Two-nozzle blower (manual) - Sopladora SEMI, year 2018.
2) Filling and Capping machine with 4 heads brand IFAMENSA type - M4/5-TR1, year 2011.
3) Labeler - IM, year 2011.
4) Plate and a Packing table.
More information is available on request.
Location: N/A
Add to Cart
View Details
FILLING LINE 12000 PPH SIG COMBIBLOC
Stock #RG1088 Sold
Used SIG Combibloc CFA 112 filling line made in 2008. Suitable for juices, milk, water, soft foods and ice tea, line has a capacity of 12,000 packs / hour and can fill packs sized 125, 200, 235 and 250ml packs. Filling system offers aseptic and non-aseptic filling, 4 tracks, 88 pocket and 2 filling stations.
Line also includes buffer (capacity 18,000 packs/hour, 28 lanes), straw applicator (capacity 18,000 packs/hour, 3 glue points, U-shaped straw), tray packer (20,000 packs/hour), shrink wrapper (approximately 20,000 packs/hour), PLC control Siemens S7-400 with touch HMI.
Location: Europe
View Details
18000 BPH GLASS BOTTLE FILLING LINE
Stock #RG2014 Sold
Used glass bottle filling line with capacity 18,000 bottles/hour previously used for carbonated tonics and fruit juices. Change parts available for bottles sized 200, 250, 275, 330, 700 and 750ml.
Major equipment includes:
- Procomac 40 head water rinser made in 1989
- BKM (now Sigma) 60 head filling machine, reportedly made 2004 with new bearing installed 2021.
- Atlanta Packing Ambra SV Flypacker capable of pack sizes approximately 100mm to 400mm.
- ZPC (Zero Pressureless Combiner) multi lane and control panel.
Location: United Kingdom
View Details
50000 Bottles/Hour KHS Beer Filling Line
Stock #KG61861 Sold
Used KHS filling line for filling and packaging beer. Capacity 50,000 bph 0.5 litre cylindrical glass bottles. Includes KHS Innoket depalletizer, KHS Innoline conveyor systems, KHS Innoclean bottle washer, Filtec inspection units, KHS Innofill filler/capper with filling level control unit, KHS Innopas pasteurizer tunnel type, KHS Innoket Labeller, KHS-Metec fill & label control units, KHS wrap around packer, carton multipacker, KHS Innopal palletizer, stretcher, printer, applicator, KHS CIP station, KHS final conveyor systems, KHS shrink packer, KHS carry-strip-master etc. Most of equipment new in 1999 - 2011.
Location: EUROPE
View Details
10,000 BPH Berchi Glass & PET Bottle Filling Line
Stock #RG9995 Sold
Used Berchi glass and PET bottle filling line with maximum capacity of 10,000 bottles/hour. Suitable for both still and carbonated products. Capacity when filling 500ml glass bottles approximately 7000 bottles/hour. Change parts for 220ml glass, 300ml glass, 330ml glass, 500ml glass, 500ml PET.
Line includes the following equipment:
- BERCHI ISOfill/V gravity filler, still and carbonated capable, rated for 10,000 bph, with auto level facility and burst bottle system. 32/32/6/6 Rinse, filler, Arol capper & Arol crowner for cap types: ROPP aluminium, plastic, crown. Made in 2005 and refurbished in 2015. Berchi Drinksmix 9, still and carbonated mixing system, 9000 litres/hour capacity with brix analyser (2005).
- CIP 20,000 litres/hour, caustic & peracetic, fully automated system (2005).
- Alfa Laval wide plate pasteuriser (2014).
- Lanxess Velcorin dosing system (2013).
- Heuft level fill and cap inspection system (2017).
- Secomak air knives (2017).
- Makro MAK 4 16P UG3 L3 CE 3 module labeller, cold glue and PSL capable, neck, front and back labels, 16 platforms and 13,000 bph capacity (2013).
- SMI MP100RD cluster pack former with cardboard insert, 4 pack, 6 pack, 8 pack cardboard sleeve, 100 packs p/m capacity (2004).
- SMI LSK 15T tray and film shrink wrapper, 15 packs p/m. Upgraded oven in 2015. Capable of trays or film only (2001 - upgraded 2015).
- Graham VFE650 sleever, Barry Wehmiller shrink tunnel, Transtech Hysek infeed system, 2 Videojet date coders, Logopac pack labeller, Lomo metal detector, Berchi Genius 10m de-palletiser, Berchi Fanuc robotic palletiser.
- 10,000 litre stainless steel hygienic buffer tank.
- Conveyor system had upgraded sight guides and chains in 2018.
Location: United Kingdom
View Details
15,000 Bottles / Hour Filling Plant for 0.35, 1.5 and 6 Litre Formats
Stock #RG9770 Sold
Used bottle form and filling plant with capacity 15,000 bottles / hour.
Major equipment for 0.35 and 1.5 litre bottles includes:
- SMI SR12 blow moulding machine with capacity 15,000 bottles / hour made in 2010.
- Rivi filling and capping with capacity 15,000 bottles / hour.
- Embomag filling machine with capacity 15,000 bottles / hour.
- Krones Canmatic 73634 labeler with capacity 15,000 bottles / hour.
- Cartoner.
- Palletiser.
- Plus accessories.
Major equipment for 6 litre bottles includes:
- SIDE blow moulding machine with capacity 1,200 bottles / hour.
- SIDE filling machine for 6 litre bottles with capacity 3,000 bottles / hour.
- Etibel labeler for 6 litre bottles with capacity 3,000 bottles / hour.
- Capper with capcaity 3,000 bottles / hour
- Cartoner for 6 litre bottles.
- Palletiser for 6 litre bottles.
- Preindema pallet wrapper made in 2010, Covepal pallet wrapper, FIS Tipo 84 R pallet wrapper.
- Conveyors.
- Handle applicator for 6 litre bottles.
Location: Spain
View Details
15000 Bottles/Hour Automatic Filling Line
Stock #RG7539 Sold
Used reconditioned automatic filling line for filling and packaging carbonated water. Capacity 15,000 BPH 0.5 and 1.5 litre cylindrical glass bottles. Comprises SUD Elettrica automatic depalletizer unit, SUD Elettrica automatic decrateing unit, Bardi automatic tunnel washer, automatic rotary isobaric monobloc BC 72/12/8 crown and plastic screw caps, automatic caps feeder, automatic saturator unit type BC, automatic rotary labelling unit Alfa body and black paper wrap around glue label, ink-Jet Nimax, SUD Elettrica automatic crates unit, SUD Elettrica automatic palletizer unit, Thermic central for the production of steam type Belelli, stainless steel conveyor belts.
Plant quote will be for reconditioned line with 12 month guarantee from delivery date.
Line also available in 'as is' condition for lower price.
Location: EUROPE
View Details
21000 to 42000 Bottles/Hour Form and Filling Line for 0.5 and 1.5 Litre PET Bottles
Stock #RG9994 Sold
Used universal combi aseptic PET bottling line with equipment made between 2007 and 2018. Fills into 0.5l bottles at 42,000 bottles/hour and 1.5l bottles at 21,000 bottles/hour, with 38mm neck and sports cap.
Equipment includes:
- (2) Sidel SB014 stretch blow moulders, pre-form orientator, pre-form hopper elevator, pre-form tipper (2007).
- Process equipment including degassing system, sterile water/disinfectant rinsing system, Logiface intermediate system, water and syrup mixing and treatment system, Schwarte-Milfor 31,270l stainless steel jacketed tank (2018), vertical scrubber.
- Krones Conveyors, accumulation tables.
- Sidel SF-ASEPTIC-FMI-90/30-CBS11 aseptic filler and capping machine, 90-head filler, 30-head capper (2007).
- Krones Linadry thru feed air dryer.
- Krones Sleevematic TS-1 combination sleever / labeller (2007) with Krones Multireels 6-head label feeder, Krones Controll Checkmat inspection unit (2017).
- Krones label inspection.
- Krones Shrinkmat 5-zone steam drying tunnel for labels (2017), Krones Linadry thermo electric trying tunnel for thermo labels (2017).
- Sidel Simonazzi Kombi palletiser (2007), SMI shink packer / wrapper (2007), Mima / Haloia stretch wrapper , EIDOS pallet labeller (2007), pallet and paper feeder systems.
Location: Europe
View Details
300 Bottles / Minute PET Filling Line
Stock #RG2097 Sold
Used PET filling line with capacity of 300 bottles / minute. Line includes the
following equipment:
- Pace unscrambling machine with capacity 30,000 bottles / hour for 300 ml
bottles;
- Dawson 48/16 Level Fill filling machine with capacity 300 bottles / minute,
for 300ml bottles;
- Mariani PMP packing machine (crate packer / palletiser) with capacity 300
bottles / minute, for 300ml bottles.
Previously used to fill PolyBottles with dairy and laban products.
Location: Saudi Arabia
View Details
300 Bottles / Minute PET Filling Line
Stock #RG2096 Sold
Used PET filling line with capacity of 300 bottles / minute. Line includes the
following equipment:
- AIS debagging machine with capacity 30,000 bottles / hour for bottle sizes
300ml and 500ml;
- Federal Vacu-Matic filling machine with capacity 300 bottles / minute.
Suitable for bottles sized 300ml and 500ml.
- Mariani packing machine (crate packer / palletiser) with capacity 300 bottles
/ minute. Suitable for bottles sized 300ml and 500ml.
Previously used to fill PolyBottles with dairy and laban products.
Location: Saudi Arabia
View Details
3000 Bottles per Hour Brew Bev Bottle Filling Line
Stock #ZG62930 Sold
Used Brew Bev, Division of Neal H Knapp, bottling filling line.
Model 16-16-8
Approximate capacity 3000 BPH
Dual air blowers
16 head rotary rinser
16 head rotary filler
6 rotary crowner with feeder
Conveyor
Pressure sensitive labeller, 2 position
Control panel
Last running 12 oz. / 355 ml glass bottles
Location: Northeast USA
View Details
9000 Bottles/Hour Kosme Alcohol Bottling Line
Stock #KG61781 Sold
Used 9000 BPH alcohol bottling line. Consisting of model STR 24/24 rinser and filler and capper machine, cap feeder, (2) logic control units, labeler type Extra Fix 4/S2E3, Willet marker, Uninitch model 97018 palletizer, and film wrapper model Uniblock 715 FF3. Worked on vodka with filling 0.5 to 1.0 liter with caps type screw and type Gala. Equipment new in 1997, Kosme, Italy. Worked during 3 years, then stopped.
Location: EUROPE
View Details
Tetra Pak ТВА-3 Base Aseptic Filling Machine
Stock #AG61782 Sold
Used Tetra Pak ТВА-3 base aseptic filling machine. Suitable for 1 LTR Tetra Brik aseptic cartons. Capacity 3500 packages per hour. Includes packing unit, conveyors and controls.technical documentation for the line available at inspection site.
Location: N/A
View Details
Used Aseptic Elopak Filling Line with Capacity 8100 Cartons Per Hour
Stock #RG9567 Sold
Used aseptic Elopak filling line for juice made in 2009 but with only approximately 14,000 hours of use. Line can fill into 1 litre, 750 ml and 500 ml cartons. Line includes the following major equipment:
- Elopak filler with capacity 8100 cartons / hour, made in 2009.
- (3) Elopak cappers with capacity 3000 cartons / hour each, all made in 2009.
- SMI shrink wrapper with capacity 2200 packs / hour, made in 2003.
- Meurer packer with capacity 1500 cartons / hour, made in 2009.
Location: Europe
View Details
