12" x 20" Dual Rotor Shredder Truck Chasis
Stock #ZP63414
Used Shred Tech dual rotor shredder mounted in a truck chasis. Includes approximately 12" X 20" hydraulically driven dual rotor shredder. Includes approximately 12" screw ischarge to deposit shred material into the back chamber of the truck. Includes operator controls, lifting mechanism for feeding bins of paper, and blades approximately 5/8" wide.
Location: Northeast USA
Add to Cart
View Details
200 HP 32" X 60" Montgomery Industries 58PM-ED Shredder
Stock #ZP62065
Used 200 HP Montgomery Industries shredder model 58PM-ED. Shredder has a 32" X 60" throat opening, 21" X 60" discharge opening, mounted on base supplying approximately 36" discharge height and direct connected to 200 HP motor. Includes operator controls.
Location: South USA
Add to Cart
View Details
200 HP 40" X 75" SSI M100H(65) Dual Rotor Shredder
Stock #ZP63493
Used SSI hydraulic driven dual rotor shredder, Model M100H(75). Has 40" x 75" throat opening with 2" wide blades installed, standard SSI material hopper. Driven by 200 HP hydraulic pumping system.
Location: Midwest USA
Add to Cart
View Details
250 HP Single Rotor Shredder
Stock #ZP63495
Used 250 hp Vecoplan Model VAZ300/250UNF single rotor shredder. New 2001 but reported rebuilt "as new" in 2022. Has 98" wide x 24" diameter single rotor rated at 142 rpm speed. 460 volt AC input, 190kw (nominal 250 hp), 332 amp load. Has hydraulically actuated ram for assisting feed of material into rotor.
Location: Southeast USA
Add to Cart
View Details
300 HP 32" X 52" SSI 2000H Dual Rotor Shredder
Stock #21619
Used 32" x 52" SSI Hydraulic Dual Rotor Shredder.
Model: 2000H
Serial: 50865-2000H
Has 2" wide blades
Driven by (2) 150 hp hydraulic pumping systems
Includes hydraulic ram feed on standard SSI material hopper
Previously shredding 55 gallon steel drums.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
45 HP 39" X 23" Andrea Shredder Granulator
Stock #ZP58281
Used S. Andrea "Big Shredder" mounted on portable van/trailer, shredder driven by a 30 kW motor, granulator driven by a 20kW motor. Shredder opening 39" X 23", granulator opening 18" X 24". Includes power generator, grappling arm, and granulator for reducing shredded parts to smaller granules. Shredder is dual rotor design. Includes cleated infeed belt.
Location: ITALY
Add to Cart
View Details
50 HP 28" x 27" Untha Model RS40-4-S Quad Rotor Shredder
Stock #L1560
Used Untha model RS40-4-S shredder. Unit has (4) rotors driven by (2) 18.5kw motors. Unit has hydraulic ram feeder with powerpack. Has 700mm x 720mm throat opening with top mounted hopper. Unit has screen fitted on the bottom outlet. Unit includes control panels. All mounted on common mild steel frame.
Location: Newton Aycliffe, UK
Add to Cart
View Details
60 HP Gruendler Heavy Duty 48HRS Bulk Waste Paper Shredder
Stock #496-123
Used Gruendler model Heavy Duty 48HRS vertical bulk waste paper shredder. 60 HP, 230/460 volt, 1175 rpm. Serial number 22630 new 1984. Cutters are designed for operating in clockwise or counter-clockwise rotation to maximum efficiency and designed for 2.5 tons per hour.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
7 HP 24" X 50" Wolf WZA 3000 Shredder
Stock #U806V-4
Used stainless steel single shaft shredder by Wolf (Germany) type WZA 3000. Shredder has a single shaft with a width 580 mm x diameter 600 mm. Shaft is belt driven by 5.5 kW, 1430 rpm, 380-415 V, 50 hz. Working rotation on shaft is 293 rpm. Shaft has 4 rows of welded knives, each row has a 5 knives. Also there is a row of static 10 knives. Machine has a feeding inlet with dimensions 615 mm width x 500 mm height. Machine is mounted on stainless steel supporting frame. Bottom discharge. Machine had been working in food industry.
Location: PL
Add to Cart
View Details
999 HP Duratech Hurricane HD-14 Tub Grinder
Stock #ZG62521
Used Duratech Hurricane HD-14 portable tub grinder. 14" diameter tub. Fixed hammers. 8" x 6' and 4' x 4' screen sizes. 1000 HP Caterpillar diesel engine drive. New 1994. Includes grapple loader.
Location: Northeast USA
Add to Cart
View Details
Hp 0.5 Stainless Steel Grinder Single Rotor
Stock #VB0007-159
Used Stainless steel grinder single rotor-Rotor Ø 55 x 415 mm-With stainless steel hopper opening 425 x 250 mm-Gear motor : 0.37 kw Hp 0.5 - Rpm 1420/47 - 3x 230/400 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Hp 0.75 Double Rotor Stainless Steel Grinder
Stock #VB0007-160
Used Double rotor stainless steel grinder-Rotor Ø 110 x 360 mm-With stainless steel hopper :-- top opening : 720 x 570 mm-- bottom opening : 360 x 200 mm-Gear motor: 0.55 kw - Hp 0.75 - Rpm 79 - 3x 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Hp 80 Untha Shredder Crusher Type RS60
Stock #BG0138-01
Used UNTHA shredder crusher-Type RS60-60 kw - Number of hours : 1375/h-Diesel generator-Mounted on container frame-Visible by appointment
Location: BELGIQUE
Add to Cart
View Details
Shredder/Grinder Combination, Gaylord Dumper & Quad Rotor Shredder
Stock #21590
Used Weima/Cumberland Shredder/Grinder Combination
System includes the following:
- Ensign box dumper 52" wide box width X 42" front to back.
- Weima Quad rotor shredder Model ZMK60 with dual 22.2 kw (nominal 30 hp) 460
volt motors with controls. Has 74" x 55" hopper opening narrowing to 27" x
50". Includes hydraulically operated ram feed assist with pump. Rotor blade
widths 3/4" for (2) middle rotors, 1/2" wide for (2) outside rotors. Includes
discharge screen approximatly 2" in diameter.
- 20" wide x 18' long rubber belt discharge conveyor.
- Cumberland 20" x 28" 3-knife granulator. Has open style rotor and 1/2" o.d.
screen. Driven by 50 hp motor with starter, 208/230/460 volt 60 hertz.
Includes tray feed hopper, 6" o.d. x 72" long screw conveyor discharge.
Grinder Serial #49410-7330.
- 6" o.d. inclined screw conveyor, 14' long for assisting in grinder
discharge.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
30 HP BLOAPCO 805V TYPE VERT SHREDDER
Stock #ZP63609 Sold
Used BloApCo 805 "V" Type vertical top feed shredder. Model 3CAXS-305-8BVA, serial 960743, new 1996. Driven by a 30 hp motor. Includes 33'8" long x 4'10" wide conveyor. Baler in photo not included. Presently not in operation and in warehouse storage. Designed to shred corrugated sheet and boxes, oversize flap cuts and die press waste to small irregular pieces... approximately 5" x 8" pieces. bottom discharge outlet feeds the shredded material into chute bins, compactors, or pneumatic scrap handling systems. Capacity to handle 300 lbs/hr per HP on corrugated board materials.
Location: Northeast USA
View Details
15 hp BloApCo Model 3CAX1536V Shredder
Stock #ZP63624 Sold
Used 36" wide BloApCo shredder. Model 3CAX1536V, serial #78634. Driven by a 15 hp motor. Includes control panel and legs.
Location: Northeast USA
View Details
30 HP 23" X 30" Saint Andrea Bulk Shredder
Stock #KG61662 Sold
Little used Saint Andrea Novara model G30/860 bulk shredder, with shredding surface 600 X 760 mm, has rectangular hopper 1530 X 1680 mm, with motor 22 kW. Has two rotors with 17.7 rpm each and torque 11.875. Mounted on frame. Suitable for large-sized plastics, paper, wood, rubber, hard wastes, wood pallets. Reportedly used only 9 hours on woods. New in 2012.
Location: RUSSIA
View Details
300 HP 32" X 52" SSI 2000H Dual Rotor Shredder
Stock #ZP63087 Sold
Used SSI hydraulic driven, dual rotor shredder Model 2000H. Has 32" x 52" throat opening, and hydraulic ram feed on standard SSI material hopper. Driven by (2) 150 HP Hydraulic pumping systems, New 12/1995. Reported 2" wide blades installed. Separately available is a American Pulverizer 48 x 50 hammermill infeed conveyor and exit conveyor.
Still installed as operated shredding steel 55 gallon drums.
Location: Northeast USA
View Details
46 HP 47" Zeno Single Shaft Shredder
Stock #ZP62601 Sold
Used Zeno Low Noise single rotor Shredder, Model ZTLL 1200 x 1600. New 2011. Carbon Steel. Feed opening is 47" (1200mm) wide x 68" (1600mm) long. Has approximate 15" (380mm) rotor flight circle with 22 cutting inserts. Rotor driven by a rated 34.5 KW (46 hp), 3/60/480 volt, 1760 rpm motor. Built 2011.
Location: Midwest USA
View Details
59 HP Jelinek Twin Shaft Shredder
Stock #HG62284 Sold
Used twin-shaft shredder manufactured by Pavel Jelinek-STROJE, Czech Republic, model DSWLI22KW. Each shaft is driven via Nord gearbox by el. motor 22kW/1450RPM/400V/3ph/50Hz. Machine is mounted on carbon steel frame. Control panel included. New 2015. Reported suitable for shredding tires, wood, wood pallets, plastics, windows frames, paper, cans, carpets etc.
Location: Czech Republik
View Details
74 HP 33" X 52" DGM DGS 850 Shredder, New & Unused
Stock #VL1321-03 Sold
New & Unused DGM Environmental Technologies general purpose model DGS 850 Single Shaft Shredder. Has approximately 840mm x 1340mm feed opening. Unit has 60 knives fitted to rotor which measures approximately 387mm diameter x 900mm wide and 6 stator knives. Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor. Unit has hydraulic powerpack driven by 3.75kw, 220-380 volt, 50hz, 1430/1730rpm motor. Unit has 50mm bottom screen fitted. Unit includes Siemens Smart Line Touch Screen PLC control panel. Includes spare knives and additional 20mm screen.
Equipment *Leasing Available on this Machine
A simple and affordable way to purchase a shredder with no upfront costs. Leasing contracts available over a 2 – 5 year period. Maintenance inclusive options for true peace of mind. Various options available at the end of the leasing contract.
*Only applies to new DGM equipment.
Location: Perry England Warehouse
View Details
80 HP 16" X 16" Jelinek Twin Shaft Shredder
Stock #HG62252 Sold
Used twin-shaft shredder manufactured by Pavel Jelinek-STROJE, Czech Republic, model D11. Feeding inlet measures 1150 mm X 800 mm. Each shaft approx. diameter 400 mm is driven via Nord gearbox by el. motor 30kW/400V/3ph/50Hz, total input of the machine 60 kW. Machine is mounted on carbon steel frame. Control panel included. New 2012.
Reported suitable for schredding tires, wood, wood pallets, plastics, windows frames, paper, cans, carpets etc. Approx. output 4500 kg/hour.
Location: CZ
View Details
Quad Rotor Shredder Mdl. STQ-100E
Stock #ZP63402 Sold
Used Quad Rotor Shred-Tech Model STQ-100E Shredder. Has 41" x 59" throat opening, Quad rotor driven by (2) 75 hp motors. 460 volt AC input. Unit is equipped with a 3" discharge screen. Shredder is new 2007.
Location: Northeast USA
View Details
SSI Series 350 4-Rotor Shredder. Model Q85(52)-ED
Stock #VZP63169 Sold
Used SSI Quad Rotor Shredding System Consists of the Following:;- SSI Series 350 4-Rotor Shredder. Model Q85(52)-ED, Serial #91485q85(52)ED. Has 54" X 52" Cutting Chamber with 6" Diameter Shafts with 1.5" Wide X 18.1" Diameter Two Hook 4140 Heat Treated Cutters. Shredder is Driven By (2) 75 Hp, 230/460 Volt Motors with Operator Control Panel, Starters, with “Direct Logic 06” PLC Control. Shredder is Equipped with Material Hopper and Removable "Slide Out" 3/4" Discharge Screen. ;- In-Feed Hopper with Dumper In-Feed Extension, Recycling Equipment MFG Model "Hi-Lift" Hydraulically Operated Dumper with Approximately 12' Lift, 52" Wide X 48" Deep Box Peg Bucket Powered by 5 Hp Hydraulic Pump Station, S/N 4998-03.
Location: South USA
View Details