0.55 kW Cutting Mill Getecha Type SRS 100
Stock #U2304-1
Used horizontal cutting mill by Getecha (Germany) type SRS 100 A2. Mill has feeding inlet with diameter 50 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x length 100 mm. Rotor is designed in non-corrosive steel and has 4 knives and is driven by gearbox and electric motor 0.55 kW, 1375 rpm, 230-400 V, 50 hz. Working rotation of rotor up to 127 rpm. Mill has one static knife. Bottom discharge through screen. Outlet discharge has diameter 55 mm. Mill is mounted on mobile platform. Has start/stop control and stainless steel cover with sound insulation.
Location: Perry Poland Warehouse
Add to Cart
View Details
0.55 kW Cutting Mill Getecha Type SRS 100
Stock #U2304-14
Used horizontal cutting mill by Getecha (Germany) type SRS 100 A1.10. Mill has two feeding inlets, each with diameter 40 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x length 100 mm. Rotor is designed in non-corrosive steel and has 4 knives and is driven by gearbox and electric motor 0.55 kW, 1375 rpm, 230-400 V, 50 hz. Working rotation of rotor up to 127 rpm. Mill has one static knife. Bottom discharge through screen. Outlet discharge has diameter 55 mm. Mill is mounted on mobile platform. Has start/stop control and stainless steel cover with sound insulation.
Location: PL
Add to Cart
View Details
1 HP Kayeness Table Top Granulator
Stock #21342-45
Used Kayeness table top granulator. Serial Number 9500-1. Direct connected to a .75kw AS motor, 220 volt, 3400 RPM 60Hz. Has an approximate 2" x 4" throat opening and tray feed hopper.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
1 HP Precision Air Conveyance Corp. Model 78FSP Inline Film Chopper
Stock #ZP60836
Used Precision Air Conveyance Corp. Model 78FSP inline film chopper. S/N PQ-9534F. Equipped with 2 knife open rotor, 1 bed knife, 4" diameter inlet and outlet. 1 HP, 115/230/460 volt, 1725 rpm motor. Includes inlet muffler box and disconnect switch. Mounted on caster plate base.
Location: Midwest USA
Add to Cart
View Details
10 HP 10" X 12" Cumberland Model 284 Granulator
Stock #20814-13
Used Cumberland Granulator. Model 284, Serial #325525-80214. New 1980. Has 10" x 12" feed throat opening. Has 3-knife open rotor. Driven by an approximately 10 HP motor, 460/3/60. Includes tray feed hopper auxiliary nip roll assembly.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
10 HP 12" X 7" Plastic Cutter
Stock #U2143-13
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 7,5 kW. Inlet dimensions: width 300 mm x 180 mm height. Rotor has 3 knives. On milling chamber walls are mounted 4 static knives. Milling chamber dimensions: diameter 290 x height 120 mm. Bottom side discharge. Mounted on tripod. Dimensions: 900 mm x 700 mm x 1150 mm.
Location: Perry Poland Warehouse
Add to Cart
View Details
10 HP 8" X 16" Wortex Model FL816 Granulator
Stock #4758-235A
Used Wortex model FL816 granulator. Approximately 10 HP drive. 8" X 16" feed. Reported 3/8" screen opening. New 1976. Serial #1-100-429.
Location: Midwest USA
Add to Cart
View Details
10 HP Model 56T "Under the Press" Grinder
Stock #21574
Used Cumberland 56T "Under the Press" Grinder
Manufacturer: Cumberland
Model: 56T
Serial: 209350-02004
Rotor driven by a 10 hp motor, 230/460 volt
Additional information: currently mounted with a 36" & 56" wide pull roll asssembly, and reconditionedx spare blades. Grinder is mounted on a vibration reducing spring assembly. Includes operator controls and AC VFD for speed control
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
10 HP Model UP755 Under-The-Press Granulator
Stock #V21537
Used Wortex model UP755 Under-The-Press granulator. Includes infeed paddle wheel assist, 10 hp rotor motor and 1 hp pull roll motor with 28.8/14.4 and 3.7/1.4 amps. Designed for blower discharge but no blower included. Granulator is mounted on casters.
Location: South USA
Add to Cart
View Details
12" x 20" 20 HP Granulator Sound Enclosed
Stock #21579-24
Used 12" x 20" Cumberland Granulator
Serial: 293400-01507
Driven by a 20 hp motor
Includes sound enclosure
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
15 HP 11" X 14" Foremost Granulator
Stock #561-20
Used Foremost plastic granulator having approximately an 11" X 14" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by approximately a 15 HP motor. Pelican type hopper. With motor starter and push buttons.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
15 HP 11" X 14" Foremost Granulator
Stock #561-21
Used Foremost plastic granulator having approximately an 11" X 14" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by approximately a 15 HP motor. Pelican type hopper. With motor starter and push buttons.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
15 HP 12" X 16" Pre-Crusher
Stock #U2143-9
Used vertical pre-crusher for plastics. Polish made. Machine has a milling chamber with internal diameter 500 mm. At the bottom of milling chamber there is a rotor with two blades. Rotor is belt driven by electric motor 11 kW, 1460 rpm, 380 V, 50 HZ. Top feeding inlet with dimensions 300 mm x 400 mm and bottom side discharge through the screen. Mounted on integrated pedestal.
Location: PL
Add to Cart
View Details
15 HP 3" x 39" Granutec Granulator, Pull Roll Fed
Stock #21497
Used Granutec 3" x 39" pull roll fed granulator, with low profile base. Includes approximately 15 hp rotor motor and motorized pull roll feed. Has blower for discharge but no blower included.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
20 HP 10" X 18" Rapid Model 1018-K Granulator
Stock #20815
Used Rapid granulator Model 1018-K. Has 3 knife, scissors cut, open rotor & 3/8" discharge screen. Includes collection bin for ground material. No blower included. Grinder is driven by a 20 HP motor, 230/460 volt. Has 10" X 18" feed opening with tray feed hopper included. Grinder serial #300-1240. New 1997.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
20 HP 12" x 15" Film Granulator With Blower and Feed Hopper
Stock #21708-2
Used Process Control Film Granulator Including Blower and Approximately 10" Wide Nip Roll Feed
Also includes ASR film feed hopper
Location: South USA
Add to Cart
View Details
20 HP 12" x 15" Film Granulator With Blower and Feed Hopper
Stock #21708-1
Used Process Control Film Granulator Including Blower and Approximately 10" Wide Nip Roll Feed
Also includes ASR film feed hopper
Location: South USA
Add to Cart
View Details
20 HP 12" X 48" Ball & Jewell Model LT-1248 Granulator
Stock #ZP60555-2
Used Ball & Jewell model LT-1248 Granulator with feed rolls. Has 12" X 48" feed throat opening with 3-knife open rotor and 2 bed knives. Driven by dual 10 HP motors, 230/460 volt, 1170 rpm. Has 7.5" X 47" feed rolls. Includes motor starter and granulator controls with interlocked 5 HP blower starter.
Location: Midwest USA
Add to Cart
View Details
5 HP 10" X 5" Plastic Cutter
Stock #U2094-3
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 Hz, 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Bottom side discharge. Dimensions: 800x400x950 mm.
Location: Perry Poland Warehouse
Add to Cart
View Details
5 HP 10" X 5" Plastic Cutter
Stock #U2143-14
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 Hz, 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Bottom side discharge. Dimensions: 800 mm x 400 mm x 950 mm.
Location: Perry Poland Warehouse
Add to Cart
View Details
5 HP 7" X 10" Mecanofil Cutter
Stock #U2085-10
Used carbon steel cutter for plastics made by Mecanofil (Spain) with feeder screw conveyor. Screw feeder conveyor driven by 0,55 kW motor via bevel gearbox. Grinding chamber dimnesions: length 250 mm x diameter 170 mm. Has 2 static blades and screen perforation 6 mm. Rotor with 4 blades is driven by belt gearbox and elec. Motor 4 kW. Mounted on carbon steel frame. Includes control panel. Shipping dimensions: width 1200 mm x depth 1800 mm, height 1900 mm. No documentation. Weight: 720 kg. New 1999. No technical documentation.
Location: Perry Poland Warehouse
Add to Cart
View Details
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Stock #C9101J-003
Used Nelmor Granulator. Model 810RGII, Serial #23195. New 1985 Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor460/3/60. Unit is factory sound enclosed, and is set up for veyor discharge. Hopper tilts open for quick clean out. With motor starter.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Stock #C9101J-002
Used Nelmor Granulator. Model 810RGII, Serial #23190. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is set up for veyor discharge. Hopper tilts open for quick clean out. With motor starter.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Stock #C9101J-004
Used Nelmor Granulator. Model 810RGII, Serial #23197. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is set up for veyor discharge. Hopper tilts open for quick clean out.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
5 HP 8" X 8" Polymer Systems Model HM-W88 Hot Melt Granulator
Stock #M2813J-006
Used Polymer Systems hot melt Granulator. Model HM-W88, Serial #HMGW881829. Has an 8" X 8" throat opening with a 2-knife open rotor. Granulator has a 2-1/2" X 8" top feed opening and a jacketed cutting chamber. Driven by a 5 HP motor, 460/3/60, 6.6 amps. Grinder is a low profile type mounted on casters and is set up for an air veyor discharge. Unit has approximately 5/16" screen, motor starters and operator controls.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Hp 10 CMB Blade Grinder Type MS30
Stock #VB0007-145
Used CMB blade grinder-Type MS30-Hopper opening dimension : 300 x 300 mm-Control : motor : Hp 10 - Rpm 500 - 3x 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Hp 10 Mild Steel Cumberland Bade Mill Type 56T Granulator
Stock #VB0001-12
Used mild steel Cumberland blade mill type 56T Granulator Hp 10. Unit has (3) rotor blades. Milling chamber measures 200mm diameter x 1450mm long. Driven by 7.5kW/10HP 380/660 Volt 975 rpm motor.
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Hp 10 Mild Steel Tria Blade Mill
Stock #VB0081-01
Used Mild steel TRIA blade mill Hp 10-Type 35-30/BM-Year 2004-Motor : Hp 10 - Rpm 1500 - 400/690 volts-Opening dimension : 320 x 330 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Stainless Steel Amap Cutter
Stock #VB0007-53
Used Stainless steel AMAP cutter. Tank diameter approximateyl 580 mm. Approximate height 110 mm. Unit has (3) blades, approximately 230 mm diameter
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
0.2 kW Thomas Scientific Model Wiley Mini Mill
Stock #H4165-7 Sold
Very little used Thomas Scientific Model Wiley Mini Mill (Model No. 3383-L70) laboratory cutting mill/granulator. Mill has 4 rotor blades and 2 stator blades. Rotor drive via el. Dayton motor 0.2 kW, 1425 rpm, 50 Hz. Includes 3 glass containers and spare parts.
Location: Perry Czech Warehouse
View Details
15 HP 9" X 12" Mdl 912-C Rapid Grinder
Stock #20461-12 Sold
Used Rapid Grinder. Model 912-C, Serial #305003. New 1989. Has 9" X 12" feed opening, 4-knife.
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
15 HP 9" X 12" Rapid Grinder
Stock #20461-10 Sold
Used Rapid grinder. 9" X 12". 4-knife. 15 HP, 230/460 volts.
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
15 HP 9" X 12" Rapid Grinder
Stock #20461-11 Sold
Used Rapid grinder. 9" X 12". 4-knife. 15 HP.
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
2 Hp MSM granulator grinder with blades
Stock #VB0001-34 Sold
Used MSM granulator grinder with blades type FW25. Mild Steel-Hopper opening : 250 mm X 210 mm-Motor: Hp 2 - Rpm 1500 - 230/400 Volts
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
2 HP Unused Precision Air Conveyance Corp. Model 78FSP Inline Film Chopper
Stock #ZP63411 Sold
Unused Precision Air Conveyance in-line chopper. Model 78FSP, serial #PQ4636. Has 2-knife rotor with blades. Driven by a 2 hp, 460 volt, 1800 rpm motor.
Location: Midwest USA
View Details
2.2 KW Cutting Mill Rapid Type G150-21A With Auger Feeder
Stock #U2352-16 Sold
Used horizontal cutting mill by Rapid (SE) type G150-21A with auger feeder. Mill has stainless steel feeding hopper with inlet dimensions: 290 mm x 190 mm. Product goes to carbon steel screw conveyer with diameter 120 mm. Auger is driven by el. motor 0,37 kW and gearbox. Working rotation of screw about 30 rpm. Milling chamber inlet has dimensions 207 mm x 170 mm. Rotor is equipped with 9 knives. At milling chamber walls are mounted two static knives. Rotor is belt driven by el. motor 2.2 kW, 940 rpm, 230/400 V, 50 hz. Bottom discharge through screen with mesh 5 mm diameter. Product falls down to conical chute which is connected to exhaust fan for pneumatic transport. Fan has working output up to 4 m3/min at pressure 170 mmWs. Mill is mounted on mobile wheels. Last time used on small plastic elements.
Location: Perry Poland Warehouse
View Details
20 hp Under-the-Press Low Profile Granulator
Stock #840-76 Sold
Used low profile granulator
Driven by a 20 hp motor
Includes feed chute, approximately 10" x 50" feed throat
Granulator mounted on wheels for easy mobility
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
7.3 HP Dreher Type S 26/41 GFS-RS Granulator
Stock #RG9497 Sold
Used Dreher type S 26/41 GFS-RS granulator. Rotor width 410mm, rotor diameter 260mm, open rotor, number of rotor knives: 3, number of stator knives: 2, with hopper, hinged top, motor 5,5 kW, 380 volt, with roll feeding, motor 0,75 kW, 220/380 volt, with variable speed drive, with fan, mounted in sound absorbing box, with switchgear.
Location: EU
View Details
Dreher Type S26/41 Blade Mill
Stock #VB0001-17 Sold
Used Dreher type S26/41 blade mill. Unit has (4) rotor blades 240mm diameter x 400mm long. Hopper opening measures 465 x 435mm. Lateral outlet measures 465 x 110 mm. Bottom outlet measures 350 x 400mm.
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
Used inline cutter granulator by Precision AirConvey model 78FSP
Stock #ZW63635 Sold
Used inline cutter granulator by Precision AirConvey Corporation model 78FSP. Equipped with Baldor motor VM3614, 2 HP, 208-230/460 V, 6.7-6.6/3.3 A, 1140 RPM, 60 Hz, 3 PH. AISI D2 Tool Steel knives, 2 rotating and 1 stationary. Machined cast iron housing. Dynamically balanced ductile iron rotor. Machined cast aluminum top cover out board precision bearings, class ABEC-7, sealed and lubricated for life. Unit designed to handle trim, matrix, and filament waste. Previously used to handle film and paper trim at the Flexographic printing facility. Reported that cutters of this make can handle trims from the following materials - ultra thin film, sheet, PSA trim and matrix, foil, laminate, paper, nonwovens, corrugated material and fabric – even carpeting and automotive floor mat trims. Total 8 units are available, the price listed below is per unit.
Location: USA
View Details
