Plant - Agricultural Chemicals(2)
Plant - Air Separation, Oxygen, Nitrogen, Hydrogen(19)
Plant - Biorefining(8)
Plant - Brewery, Distillery, Alcohol(20)
Plant - Dairy Milk Ice Cream(3)
Plant - Edible Oil(13)
Plant - Foods(42)
Plant - Industrial Inorganic Chemicals(5)
Plant - Industrial Organic Chemicals(4)
Plant - Mineral Processing, Mining, Cement(12)
Plant - Miscellaneous(26)
Plant - Petrochemical, Refinery & Asphalt(4)
Plant - Pharmaceutical(1)
Plant - Plastic Materials, Synthetic Resins and Rubber, Manmade Fibers(5)
Plant - Plastic Rubber(2)
Banbury Type Mixers(9)
Continuous Mixers(10)
Dispersion Mixers Europe(56)
Double Arm Mixers(36)
High Intensity Mixers(55)
Intensive Pharma Mixers(23)
Miscellaneous Powder Mixers(7)
Mixer Miscellaneous(21)
Mixer Universal(27)
Nauta Mixers(53)
Planetary Mixers(82)
Plowshare Mixers(50)
Ribbon Mixers(44)
Ribbon Mixers Europe(46)
Tumbling Mixers (81)
Atmospheric Tray Dryers(7)
Batch Fluid Bed Dryers(43)
Conical Rotary Vacuum Dryers(20)
Continuous Fluid Bed Dryers(12)
Conveyor Dryer(4)
Conveyor Dryer ( Sandvik Type )(2)
Double Drum Dryers(1)
Flash Dryer (3)
Other Dryers(1)
Pan Dryers(10)
Rotadisc Dryer(3)
Rotary Hot Air Dryers(10)
Rotary Kiln Dryer(2)
Rotary Multi-Pass Dryers (Heil Type)(1)
Rotary Steam Tube Dryer (4)
Rotary Tray Dryers(3)
Cartridge Filters(56)
Filter Parts(1)
Nutsche Filters(17)
Osmosis and Membrane Filters(15)
Plate & Frame Filter Presses(46)
Plate & Frame Filter Presses Europe(27)
Pressure Leaf Filters (1-199 SQFT)(20)
Pressure Leaf Filters (200 - SQFT & Up)(9)
Pressure Leaf Filters, Europe(16)
Rotary Vacuum Filters - Drum(5)
Rotary Vacuum Filters - Drum, Europe(7)
Rotary Vacuum Flters, Disc(1)
Vacuum Belt Filters(6)
Bins and IBCs(168)
Glass Lined Tanks(55)
Glass Lined Tanks, Europe(14)
Pipe Glass(2)
Stainless Steel Tanks in Europe 10,000-19,999 Litres(36)
Stainless Steel Tanks in Europe 5,000-9,999 Litres(49)
Stainless Steel Tanks in Europe Less than 5,000 Litres(358)
Stainless Steel Tanks in Europe Over 20,000 Litres(31)
Stainless Steel Tanks Less than 1,000 Gallons(145)
Stainless Steel Tanks, 10,000 to 19,999 Gallons(18)
Stainless Steel Tanks, 1000 to 1999 Gallons(35)
Stainless Steel Tanks, 20,000 Gallons and Up(3)
Stainless Steel Tanks, 2000 to 3999 Gallons(39)
Stainless Steel Tanks, 4000 to 5999 Gallons(20)
Stainless Steel Tanks, 6000 to 9999 Gallons(15)
Steel Tanks in Europe(3)
Steel Tanks Less than 10,000 Gallons(10)
Steel Tanks, 10,000 Gal. & Up(2)
Carbon Steel Reactors(1)
Glass Lined Agitators(198)
Glass Lined Baffles(179)
Glass Lined Covers(179)
Glass Lined Drives(94)
Glass Lined Reactor Parts(38)
Glass Lined Reactors(74)
Glass Lined Reactors Europe 5,000 Litres and Up(12)
Glass Lined Reactors, Europe Less than 5,000 Litres(32)
Reactor Parts - Agitator Drives(105)
Reactor Parts - Agitators(5)
Stainless Steel Reactors - Europe 5,000-19,999 Litres(13)
Stainless Steel Reactors - Europe Less than 5000 Litres(67)
Stainless Steel Reactors - Europe More than 20000 Litres(3)
Stainless Steel Reactors 2000 Gallons and Up(5)
Stainless Steel Reactors 500 to 2000 Gallons(13)
Stainless Steel Reactors Less than 500 Gallons(73)
Rectangular Screens(38)
Rotary Screens(24)
Round Screens(38)
Round Screens - Europe(7)
Screen Dewatering(1)
1 1/2" Extruders(6)
10" Extruders(1)
2 1/2" Extruders(7)
3 1/2" Extruders(3)
4 1/2" Extruders(1)
6" Extruders(1)
8" Extruders(1)
Co-Rotating Twin Screw Extruders(14)
Counter-Rotating Twin Screw Extruders(9)
Extruder Screws(11)
Extruder Temperature Panels(10)
Extrusion Line Feeders(12)
Pug Mills - Vacuum Extruder(1)
Rubber Extruders(3)
Cutter Film Densifier(4)
Cutter Guillotine(2)
Cutters/Shredders(15)
Granulator Parts(12)
Pelletizer Parts(1)
Strand Pelletizers(19)
Underwater Pelletizers(9)
Butter or Margarine Machinery(7)
Cooker - Cooler/Bottle Conveyor Type(1)
Cooker, Rendering Type(3)
Fishmeal(5)
Food Extruders(10)
Hollow Screw Cooker Or Cooler(10)
Meat Equipment(8)
Miscellaneous Equipment for Food Processing(34)
Oils and Fats Processing Equipment(22)
Pasteurizers(4)
Rendering Equipment(12)
Vegetable Cutters(3)
Harvestor(1)
Sugar and Pulp Dryers(4)
Sugar Beet Diffuser(3)
Sugar Beet Factory(3)
Sugar Beet Preparation(7)
Sugar Beet Slicer(5)
Sugar Cane Factory(9)
Sugar Cane Preparation(21)
Sugar Centrifuges(21)
Sugar Equipment, Miscellaneous(16)
Sugar Evaporator, Pan, Crystallizer(20)
Sugar Filters(7)
Sugar Pulp Dewatering Press (16)
Bottle Cleaner(2)
Checkweighers(13)
Cottoner(3)
Feeder, Miscellaneous(32)
Feeder, Vibrating Pan(8)
Filler Form Fill & Seal(24)
Filler Form Fill & Seal Liquids(10)
Filler Liquid Gravity(3)
Filler Liquid High Speed(3)
Filler Liquid Pressure Low Speed(7)
Filler Paste - Piston - Pocket(21)
Filler Powder Bag & Box(22)
Filler Powder Capsule - Ampule(9)
Filler Tablet & Counter(5)
Filler Tube(6)
Your Cart is Empty.
Home » » 75 - 200 HP Granulators
Stock #ZP63253
Used 16" x 24" Cumberland Grinder. Model #24B, serial #RS58500-7614, new 1996. Has 3-knife rotor. Belt driven to a 100 hp motor. Has a pipe feed hopper (Not tray feed style), mounted on platform with approximately 48" discharge height.
Location: South USA
Stock #ZP63592
Used 20" x 40" "Nife-Hog" style granulator. Belt driven by 150 hp motor. 460 volt, 17 rpm input. Has hopper, mounted on base supplying approximately 36" discharge height, and designed for blower discharge but no blower included. Includes reduced voltage starter. New 1999.
Location: Northeast USA
Stock #RG2061
New DGM Pulveriser type DPM800. Disc diameter 800mm. Pulveriser has one fixed and one high speed running toothed disc with precision bearings. Driven by 75kW rotary current motor. Includes screw feeder, suction unit type 11kW, water chiller 15HP, staring equipment. Reported maximum throughput is around 300kgs/hr (product specific)
Location: UK
Stock #20094-10
Used Cumberland Model 1837 granulator. Has 18" X 37" feed throat, 5 knife steep angle step adjustable rotor knives (10 segments), each knife being Approx. 18.5" wide, 2 bed knife. Belt driven by a 100 HP 460 volt only 1780 rpm motor. and gravity discharge. All mounted on leg base, swing out chamber door on downstroke side. Starter and controls not included. No Hopper. Available at additional cost ($10,000) is a nip roll hopper with 6" diameter X 37" wide knurled and grooved offset position feed roll infeed with pneumatic pinch, feed roll in-feed trumpet, feed rolls are chain & sprocket driven by a 7.5 HP 1750/1930 rpm continuous duty DC motor thru Reliance 2.76:1 gearbox.
Location: Midwest USA
Stock #ZP63467
Used 100 hp Cumberland Model 2056B granulator. Equipped with 3-knife open rotor, 1/2" o.d. screen, and tray feed hopper. New approximately 1983. Includes spare blades and screen.
Location: Midwest USA
Stock #21690-685
Used Cumberland Model 5018 Granulator having a 20" x 50" throat opening with 18 knife Hog Style rotor. Rotor is belt driven by 150 hp motor Serial # 551000-86001. New 1986 Unit to be supplied with a Pelican style hopper No blower included
Location: Midwest USA
Stock #21690-196
Used Cumberland Model 5018H Granulator having a 20" x 50" throat opening with 18 knife Hog Style rotor. Rotor is belt driven by 150 hp motor, 460 volt, 1175 rpm TEFC motor 16"od motor sheeve, 26"od rotor sheeve. Has (2) bed knives (4 pieces) with (1) in the raised position 160mm rotor bearings with air purge Cutting chamber mounted to step base. 10" o.d. airveyor reduced to 8" o.d. Includes starter panel with Size 5 starter and a fused disconnect rated for 400 amps Has a Sterling size 9.5 blower with 15HP motor. Has 3/8" holes screens installed and includes used set of 5/16" holes screens Serial #551000-84002 New 1984 Unit to be supplied with a Pelican style hopper and Sterling size 9.5, Model IHE 15 hp blower
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21642-1
Used 24" x 30" Herbold Model SML 60/100-2 Granulator Mfr: Herbold Model SML 60/100-2 Serial #KA-016237 - 7951 Throat opening: 29" x 38.5" 4-knife slant cut open rotor, 24" diameter Rotor is belt driven by 105 kw (140) hp 1775 rpm 400-460 volt motor Single fly wheel, Outboard bearings Offered less air-veyor extension, 3/8" screen installed Feed hopper Mounted on vibration pads Includes hydraulic pump with cylinder for chamber opening Includes controls for granulator
Location: Midwest USA
Stock #21704-184
Used Battenfeld Gloucester Model 1428HD Granulator Driven by 200 HP Motor Serial #142801-194 Includes 7.5 hp 460 volt AC input
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZP62228-3
Used Gruendler 36" X 60" HOG granulator driven by a 250 HP motor. Granulator includes hog rotor with approximately (30) 6" individual blades on solid rotor. Granulator is currently disassembled.
Location: South USA
Stock #21704-285
Used 15" x 27" Process Control Granulator. Model: GTDN50BMXXU Serial # 90075005 New 6/22/1999 Driven by a 50 hp motor but no motor starter included. Includes discharge blower and cyclone.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #UP5989
Used cutter/chipper for profiles by Pallmann (Germany) type PHK 100x140. Machine has feeding inlet with width 400 mm x height 100 mm. Can work on profiles made in aluminium or pvc with maximal dimensions up to 360 mm width x 85 mm height. Profile is feeded into milling chamber on roll conveyer via two leading rolls. Main motor is 55 kW. Bottom discharge through screen - but screens are not included. No control panel.
Location: EU
Stock #VL1321-09
New & Unused DGM Environmental Technologies model DGH 700/1000 granulator. Has approximately 980mm x 820mm opening with feed hopper that has side opening of 970mm x 1070mm. Unit has (7x2) knives fitted to rotor which measures approximately 700mm diameter x 1000mm wide. Includes (2) stator knives and (2) block knives for wedge. Unit is driven by 90kw, 400volt, 50hz, 1485rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 1.5kw, 400volt, 50hz, 1400rpm motor. Includes double bag off system with 11kw blower. Unit includes control panel. Equipment *Leasing Available on this Machine A simple and affordable way to purchase a granulator with no upfront costs. Leasing contracts available over a 2 – 5 year period. Maintenance inclusive options for true peace of mind. Various options available at the end of the leasing contract. *Only applies to new DGM equipment.
Location: UK
Stock #VL1321-07
New & Unused DGM Environmental Technologies model DGH 500/600 granulator. Has approximately 636mm x 615mm feed opening. Unit has (5x2) knives fitted to rotor which measures approximately 500mm diameter x 600mm wide. Includes (2) stator knives and (1) block knife for wedge. Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 0.75kw, 400volt, 50hz, 1383rpm motor. Includes double bag off system with 7.5kw blower. Unit includes control panel. Also includes spare blades, rotor, stator and block. Equipment *Leasing Available on this Machine A simple and affordable way to purchase a granulator with no upfront costs. Leasing contracts available over a 2 – 5 year period. Maintenance inclusive options for true peace of mind. Various options available at the end of the leasing contract. *Only applies to new DGM equipment.
Location: Perry England Warehouse
Stock #VL1321-05
New & Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which measures approximately 600mm diameter x 800mm wide. Includes (2) stator knives and (2) block knives for wedge. Unit is driven by 75kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 1.5kw, 400volt, 50hz, 1400rpm motor. Includes double bag off system with 7.5kw blower, spare knives and (1) spare screen. Unit includes control panel. Equipment *Leasing Available on this Machine A simple and affordable way to purchase a granulator with no upfront costs. Leasing contracts available over a 2 – 5 year period. Maintenance inclusive options for true peace of mind. Various options available at the end of the leasing contract. *Only applies to new DGM equipment.
Location: Perry England Warehouse
Stock #UG6373
Used horizontal cutting mill by Inan Plastic (TU) model 65 100. Machine has rotor with diameter 650 mm x 1000 mm width. 15 knives mounted on rotor and 4 static knives mounted in cutting chamber. Rotor works with speed up to 470 rpm and is belt driven by 75 kW el motor. Mill is mounted in soundproof housing. Milling chamber is hydraulically opened by device with power 1.4 kW. Bottom discharge through screw conveyer driven by 2.2 kW. Mill is equipped with two screens - one with perforations with diameter 10 mm, 2nd - 12 mm. Bearings of rotor shaft are equipped with water cooling channels. Includes also control panel and technical documentation. Working output up to 1200-1500 kg/h, depending on product. Last time used in plastic recycling industry. Working dimensions: W 221 cm x L 206 cm x H 391 cm x weight 5500 kg. Machine in working condition.
Location: Poland
Stock #ZP63496 Sold
Used 176 hp Tria granulator with 80cm x 160cm (31" x 62") feed throat opening. Includes tray feed hopper, 10 knife rotor with (4) bed knives. Includes 5 sets of blades, 2 screens 3/8" and 7/16", and VFD soft-start motor starter. Has blower for discharge.
Location: Northeast USA
Stock #21487-04 Sold
Used Williams 20" x 40" "Nife-Hog" style granulator belt driven by 150 hp motor. 460 volt, 1785 rpm. Has hopper, mounted on base supplying approximately 36" discharge and designed for blower discharge. Includes reduced voltage motor starter. Serial #19911. New 1999
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #RG8948 Sold
Used Pallmann mild steel type PS 8-15 heavy duty knife mill. Rotor width 1500mm wide X 800mm diameter. Has (12) rotor knives and (8) stator knives. Inlet 820 X 1520mm. Unit has a hinged top. Driven by a 155 kW, 6000 volt motor. Mounted on a frame. Sieve perforation 10 X 10mm.
Location: EUROPE