FREWITT CENTRIFUGAL GRANULATOR
Stock #RG1062
Used Frewitt stainless steel granulator. Approximate rotor length: 580mm. Feed hopper: 600x260 mm. Sieve micron: 1 mm. Clamp on discharge flange: external diameter 64 mm - internal diameter 50 mm. Driven by a 5.5kw motor.
Location: EU
Add to Cart
View Details
2" Diameter Fuji Paudal Model EXDFRS-60 Stainless Steel Twin Screw Extruder
Stock #L1167-02
Used Fuji Paudal model EXDFRS-60 stainless steel twin screw extruder. Twin 60mm diameter augers fitted with 0.5mm mesh screen. Unit is top manual infeed. Unit is driven by a amp, volt, 3 phase, 50 hz motor.
Location: Perry England Warehouse
Add to Cart
View Details
55#/Minute Fine Disc Pelletizer 304 Stainless Steel
Stock #X8670V-08
Little used Fuji Paudal model PV-20 fine disc pelletizer. 304 stainless steel contact parts. Rated 500-1500 kg/hr depending on product. Has (4) rotating wheels which push product through the die plate. Pellets fall onto rotating disc below and are marumerized (spheronized) then discharged. Driven by approximately 15 kW motor. New 1997.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Alexanderwerk Model GA65/SKM/NR Stainless Steel Granulator
Stock #L1302-02
Used Alexanderwerk Model GA65/SKM/NR stainless steel granulator. 1 x perforated die cylinder 70mm diameter with 1mm holes and 1 x solid pressure cylinder 60mm diameter. Working length 80mm. Approximate throughput range 30-50 kg/hr. Driven by a 1.5 kw, 3/50, 415 volt, 1395 rpm motor.
Location: Perry England Warehouse
Add to Cart
View Details
Alexanderwerk Stainless Steel Rotor Fine Granulator
Stock #21485-06
Used Alexanderwerk Stainless Steel Rotor Fine Granulator
Model: RFG 350 V
Rotor dimensions: 13" dia. x 14-3/4", with 1" wide blades
Circle screen, front access door, top feed, bottom discharge
Driven by an approximate 2 hp variable speed gear motor
Mounted on a stainless steel frame
316L stainless steel
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Apex Type Multiplex DUA-12 Stainless Steel Oscillating Granulator
Stock #L1308-07
Used Apex Multiplex DUA-12 stainless steel oscillating granulator. Has approximately 150mm x 150mm feed throat. 4-blade oscillating/rotating rotor driven by 0.75 kw 415 volt 3/50 variable speed motor. Mounted on stainless steel base with 4-wheels.
Location: Perry England Warehouse
Add to Cart
View Details
Bepex Model GCS200/60 Stainless Steel Extruder/Pelletizer
Stock #L1098-06
Used Bepex model GCS200/60 stainless steel extruder/pelletizer. 200mm diameter X 60mm wide twin dies. Maximum throughput is 60 to 180 kg per hour. Stainless steel hopper. 7.5 kW, 240/480 volt main drive.
Location: Perry England Warehouse
Add to Cart
View Details
Caleva Model 380A Stainless Steel Spheronizer
Stock #L1302-03
Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet.
Location: Perry England Warehouse
Add to Cart
View Details
Comil Stainless Steel Grinder
Stock #517-20924
Used stainless steel 10 HP Comil grinder.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Frewitt MFH-6 Stainless Steel Hammer Mill
Stock #X828-1115
Used Frewitt MFH-6 Stainless Steel Hammer Mill
Manufacturer: Frewitt
Model: MFH-6
Serial: 5078510125
Flow rate up to 1200 kg/hr at maximum speed of 6000 rpm
Hammer Mill within 2-glove containment unit
Stainless steel construction
Mounted on casters
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Frewitt Model MGE Fully Stainless Steel Oscillating Granulator
Stock #H4306-2
Used Frewitt model MGE fully stainless steel oscillating granulator. Stainless steel horizontal rotor diameter 120 mm x 490 mm length driven via Stober varispeed gearbox by Bauknecht 1,1kW/50Hz/380V electric motor. Conical inlet diameter 170 mm and round bottom outlet 215 mm diameter. Mounted on stainless steel frame/support with castors for easy manipulation. Includes simple start/stop panel. Number of spare screens different hole size available.
Location: Perry Czech Warehouse
Add to Cart
View Details
Fuji Paudal Model QJ-400G Stainless Steel Marumerizer
Stock #L1108-02
Used Fuji Paudal model QJ-400G stainless steel marumerizer. Mounted on wheels.
Location: Perry England Warehouse
Add to Cart
View Details
Gea Niro Nica Model S-700 Stainless Steel Spheronizer
Stock #RG2006
Used Gea Niro Nica Model S-700 stainless steel spheronizer. Unit has a 700 mm diameter bowl. 7-10 kg batch size, rotates 100-600 rpm. Unit is driven by a 3.7kW/460/60Hz electric motor. Mounted in stainless steel frame with castors. Stainless steel electrical box with integrated control panel included.
Location: South Europe
Add to Cart
View Details
Gericke Stainless Steel Nibbler Type NBS 300/450
Stock #VB0192-01
Used GERICKE stainless steel nibbler type NBS 300/450 n°2098
Inlet section 530 x 290 mm
Rotor equipped with 4 blades
Rotor driven by geared motor
Grinding chamber equipped with a Ø 10mm screen
On steel frame, without electrical cabinet, with steel hopper
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Gericke Type N450X800 MK2 Stainless Steel / Mild Steel Nibbler
Stock #L1528-03
Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven by Brook Crompton 5.5kw motor through David Brown gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent).
Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Add to Cart
View Details
Gericke Type N450X800 MK2 Stainless Steel / Mild Steel Nibbler
Stock #L1528-02
Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & 8mm screen. Unit direct driven by 5.5kW 3/50 geared motor. Has approximate throughput capacity of 30,000 l/h (product dependent).
Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Add to Cart
View Details
Gericke Type N450X800 MK2 Stainless Steel / Mild Steel Nibbler
Stock #L1528-01
Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent).
Location: Newton Aycliffe, UK
Add to Cart
View Details
Glatt Type GRS-100 Stainless Steel Granulator Screen
Stock #L0731-01
Used Glatt type GRS-100 stainless steel granulator/screen. Screen size 100mm diameter X 100mm long. Hinged stainless steel feed Cone. Manual raise/lower. Driven by a 1.1 kW electric motor through a variable speed gearbox. Mounted on a stainless steel mobile frame. Mesh diameter on screen is 1mm.
Location: Europe
Add to Cart
View Details
Glatt Type GS100 Stainless Steel Granulator Screen
Stock #L1496-02
Used Glatt type GS100 stainless steel granulator/screen. Unit has 0.75kw motor with belt drive. Has (2) cone screens. Unit is mounted on mobile base.
Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Add to Cart
View Details
Hosokawa Bepex Model BX150 Stainless Steel Low Pressure Extruder
Stock #H4347
Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other.
- The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm.
- The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm.
Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.
Location: Perry Czech Warehouse
Add to Cart
View Details
Jackson Crockatt Model No. 6 Stainless Steel Reciprocating Granulator
Stock #L1159-07
Used Jackson Crockatt model no. 6 stainless steel reciprocating granulator. Has approximately 152mm diameter 3-blade rotor. Driven by 0.37 kW, 220/250-380/440 volt, 3/50, 1425 rpm motor. Mounted on carbon steel frame. Rated up to 63 kg/hr depending on product and screen size.
Location: Perry England Warehouse
Add to Cart
View Details
Jackson Crockatt Model No. 6 Stainless Steel Reciprocating Granulator
Stock #L1307-07
Used Jackson Crockatt model no. 6 stainless steel reciprocating granulator. Has approximately 152mm diameter 3-blade rotor. Driven by 0.37 kW, 240-415 volt, 3/50, 1380 rpm motor. Mounted on stainless steel frame with wheels. Rated up to 63 kg/hr depending on product and screen size.
Click on the link below to see a video of the machine running.
Location: Perry England Warehouse
Add to Cart
View Details
Kason Kek Model CM170UG Stainless Steel Cone Mill
Stock #L1509-06
Reportedly unused Kason Kek model CM170UG stainless steel cone mill. Unit includes main electric drive. Unit is mounted on stainless steel mobile stand.
Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Add to Cart
View Details
KEK Kemutec Model 120 CM Stainless Steel Cone Mill
Stock #H4395-1
Used Kemutec KEK Model 120 CM stainless steel cone mill. Has a round blates beater direct top driven by LS Leroy Somer electric motor 0,75kW, 220-480V, 3ph/50Hz, 2840rpm. Motor is Atex rated: II 2G EExde II B T4. Rotor/blade has changeable speed via IMO Jaguar VFI. Potentiometer mounted on doors of main switchboard. (2) Cone screens type 0,85 and 1,0 associated with the machine. Cone screen top diameter 120 mm and bottom diamter 45 mm, cone height 80 mm. Mounted on stainless steel frame with wheels. Control panel included. Machine surface is balotinated. Overall dimensions: 1500 L x 850 W x 1100 mm H.
Location: Perry Czech Warehouse
Add to Cart
View Details
Kovymont Model S400 Stainless Steel Oscillating Granulator
Stock #HG62175
Used Kovymont model S400 stainless steel oscillating granulator. Has approximately 122 mm diameter x 480 mm lenght 5-blade rotor. Rotor is driven by el. motor 1,1 kW, variable speed 100-220 rpm. No screen included.
Location: Central Europe
Add to Cart
View Details
Luwa Marumerizer Stainless Steel Spheronizer
Stock #21380-02
Used Luwa Marumerizer Stainless Steel Spheronizer
Model: QJ-700V
700 mm dia. bowl
304 stainless steel cooling jacket
Rotation speed 300-700 rpm
Side product discharge with flush outlet
Belt driven
Mounted on wheels
Click on the link below to see a video of the machine running.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Metalchem Torun (Poland) Type PGM/K Stainless Steel vertical rotor granulator
Stock #U2308-21
Used vertical rotor granulator made in Metalchem Torun (Poland) type PGM/K. All construction made of stainless steel. Reported output up to 400 kg/h depending on product and size of the screen. Machine is driven by electric motor 2,2 kW motor. Shipping dimensions: 800 mm x 950 mm x 1 900 mm. Weight 270 kg. Included technical documentation.
Click on the link below to see a video of the machine running.
Location: Perry Poland Warehouse
Add to Cart
View Details
Metalchem Torun (Poland) Type PGM/K Stainless Steel vertical rotor granulator
Stock #U2308-19
Used vertical rotor granulator made in Metalchem Torun (Poland) type PGM/K. All construction made of stainless steel. Reported output up to 400 kg/h depending on product and size of the screen. Machine is driven by electric motor 2,2 kW motor. Shipping dimensions: 800 mm x 950 mm x 1 900 mm. Weight 270 kg. Included technical documentation.
Click on the link below to see a video of the machine running.
Location: Perry Poland Warehouse
Add to Cart
View Details
Mild Steel Crusher 350 x 180 mm
Stock #VB0007-173
Used Mild steel crusher-Opening 350 x 180 mm-Motor : BONFIGLIOLI – Rpm 3000 – 184 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Niro Fielder Model PMA-300 Stainless Steel High Shear Granulating Mixer
Stock #734-39983
Used Niro Fielder model PMA-300 300 liter high shear granulating mixer. Stainless steel construction. With 10 HP chopper on stainless steel base.
Location: Midwest USA
Add to Cart
View Details
Niro Fielder Nica Model S-450 Stainless Steel Spheronizer
Stock #ZG679-35925
Used Niro Fielder NICA model S-450 spheronizer. Stainless steel construction. 450mm diameter bowl. Nominally rated .4-2 kg batch size. Approximately 1.5 kW variable speed motor. 380/415 volt, 3 phase, 50 hertz. On base with controls.
Location: Midwest USA
Add to Cart
View Details
Pennwalt Stokes Model 900-44-0 Stainless Steel Tornado Mill
Stock #U1986-8
Used Pennwalt Stokes model 900-44-0 stainless steel tornado mill. Has four swing knives belt driven by 5 HP, 208-230/460 volt, 3 phase, 60 cycle, 3450 rpm motor. Includes screens. Mounted on wheels.
Location: Perry Poland Warehouse
Add to Cart
View Details
Prater Model SRV1 Stainless Steel Oscillating Granulator
Stock #560-S335
Used Prater model SRV1 stainless steel oscillating granulator.
Location: Northeast USA
Add to Cart
View Details
Quadro Model U10 Stainless Steel Comil
Stock #ZG711-37290
Used Quadro model U10 Comil. Stainless steel construction. With beater and screen. Direct coupled 20 HP, 230/460 volt XP motor with VFD controller mounted in XP panel. Mounted in Carlisle life science isolator. Single-sided with (5) glove ports. Approximately 60" long X 22" deep X 43" high with 10" diameter end access door. On stand.
Location: Midwest USA
Add to Cart
View Details
Stainless Steel Pre-Crusher
Stock #U2014-7
Used stainless steel pre-crusher with siefter. One shaft belt driven by electric motor 7.5 kW, 380 V, 15.3 a, 1455 rpm. Motor side pulley has diameter 80 mm and crusher side pulley has diameter 400 mm what gives working rotation speed of shaft 291 rpm. Section for pre-crushing has length 530 mm. In this section shaft has 3 way welded blades. At the front of the wall of crushing chamber there is a mounted row of static blades. Section for sieving has length 255 mm. In this section there are plough type blades mounted on the main shaft. Crushing chamber has dimensions: 530 mm length x 200 mm width x 200 mm depth. Feeding inlet has dimensions 535 mm x 210 mm. Machine is mounted on stainless steel frame. Two sets of screens with frames included with machine. No technical documentation included.
Location: Perry Poland Warehouse
Add to Cart
View Details
Stokes Stainless Steel Tornado Mill, Model 44-0
Stock #21432-03
Used Stokes Stainless Steel Tornado Mill
Model: 44-0
Serial: 662678-1
Driven by approximately 10 hp motor
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Used Stainless Steel Occillating Granulator Frewitt Model MG 633
Stock #UG6374
Used horizontal stainless steel oscillating granulator by Frewitt (CH) model MG 633. Machine has rotor with length 431 mm x diameter 121 mm. Drive 1 kW, 2850 rpm, 380 V, 50 hz. Output depends on product and sieve and can reach up to 1000 kg/h. Last time machine used in pharmaceutical industry.
Location: Poland
Add to Cart
View Details
Used Stainless Steel Twin Shafts Delumper With Screw Discharge
Stock #U2435-7
Used stainless steel twin shaft powder delumper with screw discharge. Machine has feeding inlet dimensions: L 100 cm x W 60.5 cm. It has two shafts, each with 5 bolted segments. One segment has 7 welded pins in 6 rows. Under the shafts there is manually operated stainless steel slide door, which separates screw discharge and milling chamber. Discharge via bottom screw moving material into the discharge outlet with diameter 210 mm. Milling shafts and screw are driven by gearbox and el motor 3 kW, 1425 rpm, 220/380 V, 50 hz. Working rotation out of gearbox 82 rpm. Machine is mounted on carbon steel supporting frame with working pedestal. Shipping dimensions - L 175 cm x W 155 cm x H 160 cm.
Location: Perry Poland Warehouse
Add to Cart
View Details
Vector Colton Model 570 Stainless Steel Granulator
Stock #7107-21
Used Vector Colton model 570 granulator. Stainless steel contacts. 3 HP, 1 phase, 60 cycle, 230/460 volts. On base. Stop/start push button controls. Serial #40813.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
KEK M203C KIBBLER 3 KW 4-BLADE
Stock #L1350-01A Sold
Used Kek M203C stainless steel kibbler. Has approximately 300mm x 200mm chamber. Grinding chamber fitted with 4-blade cantilever design beater and contoured screen. Beater driven by 3 kw 400 volt 3/50 1453 rpm motor via a gearbox. Reportedly suitable for de-agglomeration, pre-milling and coarse grinding. Also includes DMN Rotary lock valve driven by a 0.25kw motor.
Location: Perry England Warehouse
View Details
Caleva Model 27 316 Stainless Steel Twin Disc Spheronizer
Stock #RG8662 Sold
Used Caleva model 27 316 stainless steel twin disc spheronizer. Has (2) 685mm diameter X 225mm deep discs. Working capacity 7.5-30 litre (5-20kg) per disc. Driven by 7.5 kW, 220/380 volts, 3/50 variable speed motor at approximately 100-500 rpm. Has (2) 300mm X 110mm outlets discharging into (1) 150mm diameter outlet. Includes pneumatic hoist for lifting spheronizer discs. Also includes (2) approximately 10 litre feed hoppers. Mounted on stainless steel base with controls.
Location: EU
View Details
CRUSCHER LUMP BREAKER SERVOLIFT
Stock #H2063-V Sold
Used stainless steel crusher/lump breaker manufactured by Servolift (Germany) . Electric motor (BAUER) 2,2 kW/ 1400 RPM. Hopper has a diameter 300mm. Rotor speed 82 rpm.
Location: Czech republik
View Details
Fuji Paudal EXDS 100G Stainless Steel Extruder
Stock #ZG63292 Sold
Used Fuji Paudal Stainless Steel Extruder
Model: EXDS-100G
Serial: 21202
Year: 1991
Location: Northeast USA
View Details
Fuji Paudal Model MG-55 Stainless Steel Multi Granulator/Extruder
Stock #H4045-1 Sold
Used Fuji Paudal (Fitzpatrik, LCI) model MG-55 stainless steel bench-top multi granulator/extruder. Suitable for axial, radial and dome types of extrusion. Has AISI 316 stainless steel contact parts with product. Single screw is driven by 0,75 kW, 230 VAC, 50 HZ Mitsubishi motor, rotation of screw is adjustable from 10 to 90 RPMs. Includes touch control panel with frequency converter, technical documentation and sets for dome, radial and frontal extrusion with (15) dome dies and (4) frontal die plates.
Location: Perry Czech Warehouse
View Details
Hosokawa Bepex Model GCS 200/80 Stainless Steel Pellet Extruder
Stock #ZG753-42281 Sold
Used Hosokawa Bepex model GCS 200/80 stainless steel pellet extruder. 200mm diameter X 80mm wide twin dies. Stainless steel hopper with lump breaker driven by .25 kW motor and 7.5 kW, 240/480 volt main drive.
Location: Midwest USA
View Details
Hp 3 Forplex Stainless Steel Grinder Type EHX22
Stock #B0103-05 Sold
Used FORPLEX stainless steel grinder-Type EHX22-Opening dimensions : 250 x 300 mm-Rotor Ø 180 x 300 mm-Geared motor Hp 3 - 3x 400 volts
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
Kek Model CM120UG Stainless Steel Cone Mill
Stock #L1509-11 Sold
Used Kek model CM120UG stainless steel cone mill. Unit includes main electric drive. Unit is mounted on stainless steel mobile stand.
Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
View Details
Kemutec Kek Model 220 Stainless Steel Cone Mill
Stock #L1563-08 Sold
Used Kemutec Group Ltd. Cone Mill, type KEK 220, Stainless Steel. Cone dia 220 mm. incl. Sieve 1.25 mm. Belt driven by an approx. 4 Kw motor. Control panel (mounted on mill). Frame mounted. Mobile, on wheels.
Location: Denmark
View Details
Kemutec Kek Model CM220 Stainless Steel Cone Mill
Stock #L1509-01 Sold
Used Kemutec Kek model CM220 stainless steel cone mill. Unit includes main electric motor and control panel. Unit mounted on stainless steel mobile frame. Includes several spare screens.
Location: Perry, Newton Aycliffe, UK
View Details
Kemutec Kek Model CM680 Stainless Steel Cone Mill
Stock #RG2100 Sold
Used Process Components Ltd (Kemutec Kek) model CM680 cone mill. Unit has 304 stainless steel removable cone with 5mm perforations. Has 304 stainless steel Stellite coated beater driven by 18.5kw, 3/50 motor. Unit is mounted on mild steel frame.
Location: UK
View Details
Kemutec Kek Model M305 Stainless Steel Kibbler / Lump Breaker
Stock #L1509-02 Sold
Used Kemutec Kek model M305 stainless steel kibbler / lump breaker. Has 300mm wide X 600mm long feed throat with feed chute. Has (12) serrated beater paddles direct driven by 7.5 kW 230/400 volt 3/50 1455 rpm motor includes Rossi Motodrive gearbox rated 22.7/1 reduction ratio with 64 rpm output speed with control panel, reportedly rated for Atex operation. Unit is mounted on stainless steel mobile frame. Includes various spare screens.
Location: Perry Process Equipment, UK
View Details
Manesty Rotogran 4 Granulator
Stock #L1159-09 Sold
Used Manesty Rotogran 4 granulator. Belt driven by a 0.75 kW, 1400 rpm, 3 phase, 50 Hz electric motor. No rotor. Mounted on carbon steel base.
Location: Perry England Warehouse
View Details
Metalchem Torun (Poland) Type PGM/K Stainless Steel vertical rotor granulator
Stock #U2308-22 Sold
Used vertical rotor granulator made in Metalchem Torun (Poland) type PGM/K. All construction made of stainless steel. Reported output up to 400 kg/h depending on product and size of the screen. Machine is driven by electric motor 2,2 kW motor. Shipping dimensions: 800 mm x 950 mm x 1 900 mm. Weight 270 kg. Included technical documentation.
Location: Perry Poland Warehouse
View Details
Occilating Granulator/Siefter Type GO
Stock #U2408-9 Sold
Used polish made occillating granulator/siefter type GO. Contact parts designed in stainless steel. Output in range from 20 up to 300 kg/h, depending on product and size of the screen. Machine is driven by 1.1 kW motor. Shipping dimensions: 950 mm x 900 mm x 1300 mm. Weight 250 kg.
Location: Perry Poland Warehouse
View Details
Oscillating Granulator Type GO
Stock #U2408-10 Sold
Used polish made oscillating granulator/siefter type GO. Contact parts designed in stainless steel. Output in range from 20 up to 300 kg/h, depending on product and size of the screen. Machine is driven by 1.1 kW motor. Shipping dimensions: 950 mm x 900 mm x 1300 mm. Weight 250 kg.
Location: Perry Poland Warehouse
View Details
Quadro Model 198 Stainless Steel Cone Mill, Used Refurbished
Stock #L1383 Sold
Used Reconditioned Quadro model 198 stainless steel cone mill. Unit belt driven by 15kw motor. Unit includes stainless steel discharge hopper. Unit mounted on mobile trolley.
Location: Perry England Warehouse
View Details
Stainless Steel Chopper Mill
Stock #B0068-03 Sold
Used Stainless steel chopper mill-Rotor 12 blades : Ø 190 mm-Outlet screw : Ø 55 mm-Emptying height : 1050 mm-Hopper opening dimension : 640 mm x 840 mm
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
Stainless Steel Frewitt Chopper Mill Type GBM 246
Stock #VB0007-04 Sold
Used stainless steel FREWITT chopper mill type GBM 246-N° 069047-Opening : 285 x 245 mm-Drive : Hp 1.5 - Rpm 44 to 310 (manual variable speed) - 3x 220/380 Volts-Sold without inlet and outlet hopper-Sold without frame-With electric control panel
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
Used Stainless Steel Conical Mill Frewitt Model TC-150
Stock #UG6347 Sold
Used stainless steel conical mill by Frewitt (CH) model TC-150. Machine is driven by el motor with power 4 kW. Mill works with adjustable rotation in range from 500 up to 3800 rpm. Reported output depends on product and mesh of screen and can reach from 250 up to 600 kg/h. Machine is equipped with conical sieves with mesh 0.5 mm, 0.7 mm and 1 mm. Includes technical documentation.
Location: Poland
View Details
Used Stainless Steel Contact Parts Cone Mill By Quadro Comil Model 196S
Stock #U2382 Sold
Used stainless steel contact parts cone mill for powders by Quadro (CA) type Comil model 196S. Machine has feeding inlet with diameter 100 mm. Bottom discharge outlet with diameter 315 mm. Machine has stainless steel triangle rotor belt driven by el. motor 7.5 kW, 1425 rpm, 190/330 V, 50 hz. Machine is equipped with two stainless steel conical screens with round perforations:
- signature: 2F018R01530 (457) new 2013-04 and
- signature: 2F032R02528* (813) new 2014-06
Machine can reach output depending on product and screen in range from 800 kg/h up to 3500 kg/h. Mill is mounted on stainless steel supporting frame. Legs and bottom frame are designed in carbon steel. Machine last time used in food industry. Technical documentation included in digital form.
Location: Perry Poland Warehouse
View Details
