130 LTR FM130D LITTLEFORD MIXER
100 Liter Draiswerke Model TS100 Turbulent Mixer
Stock #9930-06
Used Draiswerke TS100 turbulent mixer. 100 liter capacity. Self-contained. 3 bar pressure. 15 HP, 50 hz, 380 volt.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
1200 Liter Cooling Mixer Stainless Steel, Jacketed, Mdl SPM487SS
Stock #X21640-3
Used Scott Equipment stainless steel jacketed cooling mixer Model SPM487SS. Includes motor and gear reducer. Has coffin style lid for ease of clean out, plow type agitation, center bottom outlet 6"o.d. Chamber is 48" diameter x 84" long and includes (2) 8" diameter inlets. Mixer supplies 43 cu.ft. mixing capacity. Driven by 30 hp V-belt motor.
Location: Midwest USA
Add to Cart
View Details
1200 Liter Cooling Mixer Stainless Steel, Jacketed, Mdl SPM487SS
Stock #X21640-2
Used Scott Equipment stainless steel jacketed cooling mixer Model SPM487SS. Includes motor and gear reducer. Has coffin style lid for ease of clean out, plow type agitation, center bottom outlet 6"o.d. Chamber is 48" diameter x 84" long and includes (2) 8" diameter inlets. Mixer supplies 43 cu.ft. mixing capacity. Driven by 30 hp V-belt motor.
Location: Midwest USA
Add to Cart
View Details
130 Liter Littleford Model FM-130-D Stainless Steel Intensive Mixer
Stock #8033-1
Used Littleford model FM-130-D intensive mixer having a total vessel volume of 4.6 cubic feet and a working capacity of 3.0 cubic feet. Stainless steel contact parts. Jacketed chamber rated at 75 psi at 320 degrees F. National board #10351. Chamber has a single 10 HP chopper. Mixer is belt driven by a 5 HP motor through a gear box. Mounted on legs. Manufactured 1971.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
130 Litre Lödige Model FM130D/1MZ Stainless Steel Ploughshare Mixer
Stock #H4255-1
Used Lödige model FM 130D/1MZ stainless steel ploughshare mixer. Has 130 litre total capacity and approx. 35-90 litre working capacity. Stainless steel jacketed mixing chamber has diameter approximately 490 mm x 655 mm long, has (1) top feeding/inspection hatche 520 mm x 310 mm, also has (1) top inlet with diameter 200 mm. Carbon steel jacket rated 5 bar pressure at 150°C. Bolted plougshare mixing blades belt driven by 5.5 kW, 50 Hz, 380 V, 965 rpm. Standard rope type of sealing on horizontal shaft. Has (1) chopper directly driven by 4 kW, 50 Hz, 380 V, 2895 RPMs el. motor. Has rectangular 120 mm x 160 mm central bottom outlet with manually operated clack valve. Includes control panel.
Location: Perry Czech Warehouse
Add to Cart
View Details
130 Litre Lödige Model FM130D1MZ Stainless Steel Ploughshare Batch Powder Mixer
Stock #RG8559
Used Lodige model FM130D1MZ stainless steel jacketed ploughshare batch powder mixer. External mild steel heating / cooling jacket rated for 5 bar, (72.5 psi) at 150 Celsius. two off ploughs and two off end scrapers on common centre shaft with water flush to seals. 520mm X 310mm top hinged access door with 270mm DIA feed chute and two off locking clamps. 160mm X 120mm bottom discharge "bomb door" with ratchet handle operation and 240mm DIA discharge tube. Single side chopper with 4 X 4 blade refiner driven by 4.6kW 2930 rpm. 415/3/50 EXE G1 - G3 motor. Variable speed main drive with 5.5kW 1440 rpm 415/3/50 EEXDIIB T4 motor and direct coupled sew Eurodrive model R80 VU4/H5 manually variable gearbox. Shaft output speed 26 - 160 rpm.
Location: UK
Add to Cart
View Details
1500 Litre Shengli Machinery Manufacture Model LDH-1,5P Stainless Steel Ploughshare Mixer
Stock #H4383
Used Shanghai Shengli Machinery Manufacture model LDH-1,5P, stainless steel ploughshare mixer. Has 1500 litre total capacity and approx. 600-900 litre working capacity. Stainless steel mixing chamber has diameter approximately 980 mm x 1950 mm long, has (2) side feeding/inspection hatche 480 mm x 380 mm, also has (3) top inlet with diameter 2x 200 mm and 1x 300mm. Bolted plougshare mixing blades belt driven by 37 kW, 50 Hz. Standard rope type of sealing on horizontal shaft. Has (3) choppers directly driven by 5,5 kW, 50 Hz, 380 V, 1460 RPMs el. motors. Has rectangular 180 mm x 530 mm central bottom outlet with manually operated clack valve. Includes control panel with frequency converter, and carbon steel base.
Location: Czech republik
Add to Cart
View Details
160 Liter Drais Type TSF-160 Stainless Steel Turbulent Super Flusher
Stock #9007-02
Used Drais type TSF-160 turbulent super flusher. Stainless steel wetted parts. 42 gallon, 160 liter capacity. Rated full vacuum, 125 psig jacket. 60 HP DC motor. Controls
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
1700 Liter Kates ATEX Carbon Steel Paddle Mixer Jacketed
Stock #U2333-1
Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped with stainless steel electric control panel. Technical documentation included.
Location: Perry Poland Warehouse
Add to Cart
View Details
2,000 Litre Lödige Model FKM 2000D Stainless Steel Ploughshare Mixer
Stock #L1386
Used Lödige model FKM 2000D stainless steel ploughshare mixer.
Manufacturer: Lödige
Material: Stainless steel
Capacity: 2,000 litre total capacity. 800-1,400 litre working capacity
Discharge Type: Drop door discharge
Type Of Blades: Ploughshare mixing blades
Motor: 22kw 220-380 volt 3/50 1455rpm motor via a gearbox
Also includes: Carbon steel jacket
- 4 multiple choppers driven by 4kw 220-380 volt 3/50 2870rpm motors
- 2 side inspection doors
- Carbon steel base
Location: EU
Add to Cart
View Details
2,000 Litre Lödige Model FKM 2000D Stainless Steel Ploughshare Mixer
Stock #L1395
Used Lödige model FKM 2000D stainless steel ploughshare mixer.
Manufacturer: Lödige
Material: Stainless steel
Capacity: 2,000 litre total capacity. 800-1,400 litre working capacity.
Discharge Type: 2 bottom discharge outlets
Type Of Blades: Ploughshare mixing blades
Motor: 55kw, 2960rpm, 3/50 motor via a gearbox
Also includes: 2 side inspection doors
-Provision for choppers but none currently fitted
-Mixing chamber has carbon steel jacket.
Location: Europe
Add to Cart
View Details
20 Litre Lodige Model L20 Stainless Steel Ploughshare Mixer
Stock #L1613
Used Lodige model L20 stainless steel ploughshare mixer. Approximately 20 litre total capacity with 6 to 14 litre working capacity (product dependant). Has stainless steel mixing chamber which measures approximately 295mm diameter x 285mm long. Has stainless steel shaft with blades, driven by 1.5kw motor. Unit has side entry stainless steel chopper with electric motor. Unit includes in-built controls.
Location: Newton Aycliffe, UK
Add to Cart
View Details
200 Litre Herbst Model HRZ-H 200 Stainless Steel Horizontal T-arm Mixer, Used Refurbished
Stock #L1416
Comprehensively tested, used Herbst model HRZ-H 200 304 stainless steel horizonal T-arm mixer.
Manufacturer: Herbst
Material: Stainless steel
Year of Manufacture: 2014
Capacity: 200 litre (product dependent)
Mixing trough: Stainless steel cylindrical chamber measures approximately 850mm long x 550mm diameter.
Type Of Blades: Stainless steel shaft with T-arm blades
Motor: 4kw 1480rpm 230-400 volt 3/50 motor and gearbox
Also includes: Stainless steel frame
A video of this mixer is available below.
https://www.youtube.com/watch?v=Se0YMTORnZQ
Location: Newton Aycliffe, UK
Add to Cart
View Details
200 Litre Winkworth Model RT200 Stainless Steel High Speed Ploughshare Mixer
Stock #L1552
Comprehensively tested and refurbished, Used Winkworth model RT200 stainless steel high speed ploughshare (T-Arm) mixer.
Manufacturer: Winkworth
Material: Stainless Steel
Capacity: Approximately 200 Litre Capacity
Mixing chamber: Approximately 1,000mm x 650mm Diameter
Discharge Type: Centre Bottom with Discharge Valve
Type Of Mixer: T-Arm Blades
Motor: 11kW SEW Geared Motor
Also includes: Stainless Steel Side Entry Chopper Driven by 4kW Motor. Tote lifter (Max 150 kg) and 2 off stainless steel totes.
Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Add to Cart
View Details
2000 Liter Littleford Model FKM2000E Carbon Steel Mixer
Stock #20332-03
Used Littleford Model FKM2000E Carbon Steel Mixer
42.4 cubic foot working capacity
Jacket rated 75 psi
Equipped with (3) high speed choppers
75 HP main motor
Click on the link below to see a video of the machine running.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
2000 Liter Walter Equipment Ltd Plow Mixer
Stock #ZG61125
Used Walter Equipment Ltd. model AG78 65 cubic foot working capacity jacketed plow/plough mixer. Jacket rated to 15 psi. 115.5" long X 44.5" diameter mixing chamber. 60 HP, 460 volt, 1775 rpm main drive into gear box with 155 rpm out (mixing shaft speed is approximately 100 rpm). Equipped with (4) 10 HP, 208-230/460 volt, 3505 rpm choppers.
Location: Northeast USA
Add to Cart
View Details
300 L Used Horizontal Ploughshare Mixer Morton FKM 300D With Chopper
Stock #U2432-2
Used stainless steel horizontal ploughshare powder mixer by Morton (UK) model FKM300D. Total volume of mixing chamber is 300 l. Working volume in range from 100 up to 210 l. Mixer has single mixing shaft with bolted ploughs, and is belt driven by el motor 7.5 kW, 1450 rpm, 415 V, 3/50 Hz, through gearbox. Mixer has also single chopper, driven directly by 4 kW, 2890 rpm, 415 V, 3/50 hz. Mixing chamber has manually operated inspection doors with dimensions 480 mm x 310 mm. There are also two top connections - one with diameter 200 mm and second with 250 mm, and one central bottom discharge outlet. Mixer is mounted on carbon steel stand, giving about 700 mm ground clearance. Machine has local control panel. Shipping dimensions: L240 cm x W 150 cm x H 214 cm.
Location: Perry Poland Warehouse
Add to Cart
View Details
300 Litre Lödige Model KM-300D Stainless Steel Continuous Ploughshare Mixer
Stock #L1183-09
Comprehensively tested , used Lödige model KM-300D stainless steel continuous ploughshare mixer. Stainless steel 316ti (1,4571) continuous ploughshare mixer / blender dryer.
Manufacturer: Lödige
Material: Stainless steel
Capacity: Total volume: vessel 300 litre. Jacket: 30 litre, agitator: 25 litre. Working volume: approx 150 litre.
Other Information: Heat transfer: body: 1,35M2 agitator 1,25M2 (to be confirmed) unit rated internal: atmospheric @ 164ºC, stainless steel jacket rated 6,0bar @ 164ºC. Plough shaft mounted by external packed glands (stuffing box) complete with motor, reduction gearbox. Side entry refiner / chopper. Chopper motor: flange mounted / 11,0kW / EX D3N G4 / 500V / 3PH / 50HZ / 2920rpm / class F / IP55. Drive motor: foot mounted 2,65-26kW / EX D3N G4 / 500V / 3PH / 50HZ / 150-1470rpm / class F / IP55. Motor cooler, flange mounted
0,12kW / EX D3N G5 / 500V / 3PH / 50HZ / 1380rpm / class F / IP55. Side: 2 X hinged inspection doors. End bottom discharge outlet 180mm. Unit is supported on a standalone mild steel frame.
Location: Perry England Warehouse
Add to Cart
View Details
300 Litre Lödige Stainless Steel Ploughshare Mixer
Stock #RG8810
Used approximately 300 Litre Lodige stainless steel ploughshare mixer. Unit includes approximately 25 litre jacket rated 0.5 bar. Internals rated 9.6 bar at 110 deg.C. Side entry chopper with no motor fitted. Unit does not appear to include a motor.
Location: EU
Add to Cart
View Details
300 Litre Morton Model KM 300D-2MZ Stainless Steel PTFE Lined Ploughshare Mixer
Stock #RG9051
Used Morton model km 300D-2MZ stainless steel PTFE lined continuous ploughshare mixer. Has 300 litre capacity. Stainless steel ploughshare blades belt driven by 15 kW 3/50 motor. Includes (2) stainless steel multiple blade choppers direct driven by 5.5 kW 3/50 580-2900 rpm motors with inverter drives. Has (2) side inspection doors. Includes Weir plate discharge. Unit mounted on mild steel support frame. Also includes control panel.
Location: UK
Add to Cart
View Details
3000 Liter Littleford Stainless Steel Plough Mixer
Stock #ZG63303
Used Littleford 3000 liter stainless steel jacketed plough mixer. Model FKM-3000-D. Sanitary design, 316 stainless steel. Mixer equipped plough & choppers and chopper motors. Extra additional motor for chopper are included. This mixer has XP Motors. Driven by 150 hp main motor with gearbox. Includes VFD control panel and stand platform, Wiesloch oil boiler 523 kW, and Wintek heat exchanger.
Location: Northeast USA
Add to Cart
View Details
3000 Litre Morton FKM3000D Stainless Steel Jacketed Ploughshare Mixer.
Stock #RG9961
Used Morton Lodige Type FKM3000D 316L stainless steel jacketed ploughshare mixer. Working capacity 2100 litres with stainless steel 316L jacket of 208litres capacity, max working pressure 5 bar and max working temperature 162 deg.C. Main drive 30kW variable speed SEW Eurodrive unit Type R163 VU6 DV200L4. Ratio 37,424 fitted with servo motor with electrical remote control. Speed range 16-67 rpm. Power at 16rpm =15kW, torque will be 8953 Nm. power at 67 rpm =25kW, torque will be 3316 Nm. Vessel internal length is 2960 mm. Total overall length of the unit 5638mm approx. Top central inlet 350mm diameter. Central bottom outlet approximately 200mm diameter. Unit has 2 off 540 x 400mm inspection/cleaning hatches with interlocks.
Location: United Kingdom
Add to Cart
View Details
400 Litre Kemutec Kek Model 400PE Stainless Steel Ploughshare Blender.
Stock #L1509-05
Comprehensively tested, used Kemutec Kek model 400 PE stainless steel ploughshare mixer.
Manufacturer: Kemutec
Material: Stainless Steel
Capacity: 400 litre (product dependent)
Discharge Type: Centre bottom discharge with valve.
Type Of Blades: T-arm mixing blades driven by electirc motor/gearbox.
Also Includes: Spare stainless steel plough blade mixing shaft.
-(1) side chopper with electric motor.
-Mobile base.
A video of this mixer is available below.
https://youtu.be/xQE-DrKNDj0
Location: Newton Aycliffe, UK
Add to Cart
View Details
400 Litre Winkworth Model RT400 Stainless Steel High Speed Ploughshare Mixer
Stock #L1500
Comprehensively tested and refurbished used Winkworth model RT400 316 stainless steel high speed ploughshare (T-Arm) mixer.
Material: Stainless steel (316)
Capacity: 400 litre (Product Dependent)
Mixing Chamber: 1,300mm Long x 800mm Diameter
Discharge Type: Centre Bottom Pneumatically Operated Flap Discharge Valve
Type Of Blades: T-Arm Blades
Motor: 22kW SEW Geared Motor
Also includes: (1) Stainless Steel Side Entry Refiner Driven by a 7.5kW Motor.
Provision for a Second Chopper.
A video of this mixer is available below.
https://youtu.be/xctXwbXJD4I
Location: Newton Aycliffe, UK
Add to Cart
View Details
400 Litre Winkworth Model RT400 Stainless Steel High Speed Ploughshare Mixer
Stock #L1531-02
Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer.
Manufacturer: Winkworth
Material: Stainless Steel (321)
Capacity: 400 litre (product Dependent)
Mixing Chamber: 1,300mm long x 800mm Diameter
Type Of Blades: T-Arm Blades
Motor: 5.5kW Motor and Gearbox
Also Includes: External Mild Steel Jacket
Provision for One Chopper but None Currently Fitted.
A video of this mixer is available below.
https://youtu.be/4IZa-mfBcJk/
https://youtu.be/mJ_JsXnc_vg
Location: Newton Aycliffe, UK
Add to Cart
View Details
400 Litre Winkworth Model RT400 Stainless Steel High Speed Ploughshare Mixer
Stock #L1548
Comprehensively tested and refurbished, used Winkworth model RT400 316 stainless steel high speed ploughshare mixer.
Material: Stainless steel
Capacity: 400 litre (product dependent)
Mixing trough: 1,300mm long x 800mm diameter
Discharge Type: Centre bottom pneumatically operated flap discharge value
Type Of Blades: Ploughshare blades
Motor: 11kw, 380-415 volt, 3/50, 1450-1460rpm motor through Custom Power Transmission gearbox type MO820
Revolutions Per Minute: 99rpm
Also includes: (1) stainless steel side entry chopper driven by 4kw, 380-415volt, 2840-2870rpm, 3/50 motor.
A video of this mixer is available below.
https://youtu.be/EHK1C2PqjPk
Location: Newton Aycliffe, UK
Add to Cart
View Details
400 Litre Winkworth Model RT400 Stainless Steel High Speed Ploughshare Mixer
Stock #L1554-01
Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer.
Manufacturer: Winkworth
Material: Stainless steel
Year of Manufacture: 2016
Capacity: 400 litre (product dependent)
Mixing trough: 1,300mm long x 800mm diameter.
Type Of Blades: T-Arm ploughshare blades with drive/gearbox.
A video of this mixer is available below.
https://youtu.be/lEGK9xzL8bk
Location: Newton Aycliffe, UK
Add to Cart
View Details
4000 Liter Vacuum Plow Mixer Dryer VT-4000
Stock #ZG63327
Used Littleford vacuum plow mixer/dryer.
4000 liter capacity
Model VT-4000
304 stainless steel
Approximately 54" diameter X 121" straight side with dished ends
Internal rated 15 psi/vacuum @ 250°F
Stainless steel jacket rated 75 psi @ 250°F
6" diameter shaft, 8 bolt-on plow blades, 2 end scrapers
Air purged main seals
50 HP motor, includes Falk gearbox
Various top openings, 6" diameter off-center bottom outlet
Unit mounted on carbon steel frame
Included VFD control panel
Last used in cocoa powder
Location: N/A
Add to Cart
View Details
4200 Liter Littleford FKM4200D Carbon Steel Mixer
Stock #20332-05
Used Littleford FKM4200D mixer. Carbon steel contacts. 148 cubic foot total capacity, 4200 liters. Jacket rated 75 psi. Equipped with (4) 15 HP high speed choppers. 100 HP main motor. Mounted on base.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
4200 Liter Littleford Model KM4200 304 Stainless Steel Continuous Mixer
Stock #5776-1
Used Littleford model KM4200 148 cubic foot total capacity continuous mixer. Approximately 75 cubic foot working capacity. 304 stainless steel product contacts. Carbon steel conventional jacket ASME constructed 75 psi @ 320°F. Driven through gear reducer by 75 HP motor. Outboard bearings and air purged shaft seals. Built 1975. Serial #10638. National board 1023.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
4200 Liter Purnell Model HKM4200 Stainless Steel Mixer
Stock #9336-1
Used Purnell model HKM4200, 4200 liter (148 cubic foot total capacity, 104 cubic foot 70% working capacity) stainless steel jacketed horizontal mixer. Jacket rated at 60 psi, 350°F. Serial #89H42033. New 1990. Horizontal mixer has provisions for (4) choppers, but no choppers included. Equipped with "coffin" style lid for ease of clean out. Has center bottom outlet, includes operator controls, driven by 125/62.5 HP 2-speed motor. Includes stainless steel rotary valve.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
5 Litre Lodige Mixer Type M5R Double Jacket
Stock #B0174-01
Used LODIGE mixer Type M5R - Double jacket - Total volume : 5 litre - Useful capacity : 4 litre - Motor : 0.75 kw – Hp 1 – 220/380 volts - Variable speed
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
600 Liter Lodige FKM600D Stainless Steel Powder Turbo Mixer
Stock #ZG63799
Used Lodige FKM600D Stainless Steel Powder Turbo Mixer
Manufacturer: Lodige
Model: FKM 600D
Year: 1981
Volume: 600 liter
Material of construction: stainless steel
Trough dimensions: 790 mm dia. x 1230 mm
Inlet: 250 mm dia.
Outlet: 180 mm x 240 mm
(2) 450 mm x 380 mm inspection hatches
Driven by a 18.5 kw motor
Mounted on frame
Location: MEXICO
Add to Cart
View Details
600 Litre Lödige Model FKM600D Stainless Steel Ploughshare Mixer
Stock #HG62496
Used Lodige model FKM 600 D, stainless steel turbulent mixer. 600 litre total capacity, max. working capacity approx. 400 l. Nonjacketed cylindrical vessel has (2) inspection doors 450 mm x 400 mm. Ploughshare type of mixing blades driven by 50Hz/400V/30kW Siemens motor through Flender gear box. Has (2) choppers with 200mm diameter general purpose disintegrating head direct driven by el. motor. Manual operated central bottom outlet diametr 250 mm. Included control panel.
Location: EU
Add to Cart
View Details
600 Litre Morton Model FKM600 Stainless Steel Jacketed Ploughshare Type Mixer
Stock #L1574-01
Comprehensively tested, used Morton model FKM600 stainless steel jacketed ploughshare type mixer.
Manufacturer: Morton
Material: Stainless steel
External jacket: Stainless steel rated 5.5 bar design pressure at 168 degC.
Capacity: Approximately 180-420 litre working capacity, 600 litre total capacity (product dependent)
Discharge Type: Bottom bomb door style with pneumatically operated door.
Type Of Blades: Cored stainless steel shaft rated 5.5 bar design pressure at 168 degC with Becker-shovel type blades
Motor: SEW Eurodrive 14-22kW 415 volt 3/50 motor with gearbox rated 11.1/1 reduction ratio and final output speed 64/130 rpm
Also includes: Provision for (2) side entry choppers. (Not fitted).
.
Location: Newton Aycliffe, UK
Add to Cart
View Details
600 Litre Morton Model FKM600 Stainless Steel Jacketed Ploughshare Type Mixer
Stock #L1574-02
Comprehensively tested and refurbished, used Morton model FKM600 stainless steel jacketed ploughshare type mixer.
Manufacturer: Morton
Material: Stainless steel
External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c.
Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent)
Discharge Type: Bottom bomb door style with pneumatically operated door.
Type Of Blades: Stainless steel shaft with Becker-shovel type blades
Motor: 22kW motor with gearbox
Also includes: Provision for (2) side entry choppers. (Not fitted).
Location: Newton Aycliffe, UK
Add to Cart
View Details
600 Litre Morton Model FKM600D Stainless Steel Ploughshare Mixer
Stock #L1474-01
Used Morton model FKM600D 321 stainless steel contact parts ploughshare mixer.
Material: Stainless steel
Capacity: 600 litre total capacity. 200-420 litre working capacity (product dependent)
Mixing trough: 790mm diameter x 1240mm long
Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve.
Type Of Blades: 321 stainless steel ploughshare blades
Motor: 37kw, 1500rpm, 3/50 motor with Renolds hydraulic coupling and Flender gearbox giving reduction ratio of 14:1.
Unit includes: provision for 2 choppers.
- x2 400mm x 450mm side access doors.
- Mounted on a mild steel frame
A video of this mixer is available below.
https://youtu.be/AcJZYvfxMfU
Location: Newton Aycliffe, UK
Add to Cart
View Details
750 Liter Govoni Sim Bianca Stainless Steel Horizontal Ploughshare Mixer
Stock #U2343-1
Second hand stainless steel contact parts horizontal ploughshare mixer by Govoni Sim Bianca (Italy) with working volume 750 l. Mixing chamber has internal dimensions: diameter 1000 mm x L 1445 mm. Total volume of mixing chamber about 1100 l. Top feeding central inlet has diameter 400 mm. Mixer has also two nozzles for spraying liquid inside mixing chamber. Central bottom discharge outlet has pneumatically operated valve. There is inspection manway at side wall with dimensions 500 mm x 475 mm and bolted lid. Mixer has shaft with three ploughs and two paddles working close to side walls. All mixing elemets are bolted. Shaft is driven by el motor 37/26 kW, 1475/738 rpm, 380 V, 50 hz and gearbox with reduction rate i= 10. Working rotation of shaft 147,5/73,8 rpm. Mixer has external carbon steel side walls and is mounted on stainless steel supporting frame. There are two posts for installing choppers, but choppers are not included.
Location: Perry Poland Warehouse
Add to Cart
View Details
80 Litre Winkworth Model RT80 Stainless Steel Jacketed High Speed Mixer
Stock #B0120-01
Comprehensively tested, used WINKWORTH model RT80 stainless steel jacketed high speed mixer.
Manufacturer: Winkworth
Model: RT80
Material: Stainless Steel
Capacity: 120 litre, working capacity 80 litre
Agitation: Shaft equipped with 4 mixing blades driven by 7.5 kw, Hp 10, Rpm 30/150, 380 volt motor. Stainless steel chopper driven by 5.7/4.7 kW, 50Hz, 2900/1450 rpm, 380-415 V
Also includes: Stainless steel jacket rated 3.5 bar at 200 DegC, 2000 watt hot water heating skid. Local controls.
Location: FRANCE
Add to Cart
View Details
800 Litre Morton Model FKM800 Stainless Steel Ploughshare Mixer
Stock #L1570
Comprehensively tested and refurbished used Morton model FKM800 304 stainless steel ploughshare mixer.
Manufacturer: Morton
Material: Stainless steel (304)
Capacity: 240-560 litre working capacity. 800 litre total capacity (product dependent)
Mixing Chamber: 1,800mm straight side x 760mm diameter
Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve
Type Of Blades: Stainless Steel Shaft with Ploughshare Blades
Motor: 15kW Motor with Gearbox
Also Includes: 2 Stainless Steel Side Entry Choppers Direct Driven by 4kW Motors.
Click on the link below to see a video of the machine running.
https://youtu.be/WMCJdyvymvE
Location: Newton Aycliffe, UK
Add to Cart
View Details
8000 Ltr Carbon Steel Dry Cement Mixer
Stock #XZS63477
Reportedly unused Ibau Hamburg type IB-M 8000 dry cement mixer. Made of mild steel, painted inside. Capacity approx.280 cuft. / 8000 liters. Paddle mixing elements on thick shaft. Has side chopper seats, some of them has connected motors. Has 110 kW/1480 rpm main motor with Flender gearbox which gives a rotation speed 9-17 rpm.
Location: EUROPE
Add to Cart
View Details
90 Liter Stainless Steel Jacketed Day Turbulent Mixer, 75 psi Jacket
Stock #21432-05
Used Approximately 90 Liter Stainless Steel Jacketed Day Turbulent Mixer
Manufacturer: Day
National Board #: 1535
Serial #: 88503
Jacket pressure: 75 psi @ 320°F
Mixing chamber dimensions: 18" dia. x 22" long
Center bottom discharge
Driven by a 7.5 hp motor, 230/460 volt
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Littleford FKM1200D Stainless Steel Mixer
Stock #21656-02
Used Littleford FKM1200D Stainless Steel Mixer
Manufacturer: Littleford
Model: FKM-1200-D
Serial: 42820-5295
Year: 2001
Total capacity: 1200 liters
Working capacity: 988 liters
Material of construction: stainless steel
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Littleford FKM600D Stainless Steel Jacketed Mixer
Stock #21656-01
Used Littleford FKM600D Stainless Steel Jacketed Mixer
Manufacturer: Littleford
Model: FKM-600-D
Serial: 42818-5293
Year: 2001
Total capacity: 600 liters
Working capacity: approximately 350 liters
Jacket pressure: 75 psi @ 320°F
Material of construction: stainless steel
Main drive motor: 15 hp into a Falk gearbox
(2) chopper motors: 10 hp each
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
1,200 Litre Morton FKM1200D Stainless Steel Ploughshare Mixer, Used Refurbished
Stock #L1459-01 Sold
Perry is offering a high quality refurbished, used Morton model FKM1200D 304
stainless steel ploughshare mixer. Morton is recognised as a leading
manufacturer of mixing equipment.
Manufacturer: Morton
Material: Stainless steel
Serial Number: M23876
Capacity: 400-850 litre working capacity. 1,200 litre total capacity (product
dependent)
Mixing trough: 1700mm straight side x 960mm diameter.
Discharge Type: pneumatically operated centre bottom discharge
Type Of Blades: Stainless steel ploughshare blades
Motor: 30/18.5 kw 1460/730rpm 415V 3/50 electric motor via a Eurodrive gearbox
This unit is ready to run. A video of this mixer is available below.
https://youtu.be/_kVBlLPvZuU
Perry has been supplying this type of equipment for decades. You can rely on
getting a first class service from the Perry Equipment Group.
Location: Newton Aycliffe, UK
View Details
10,500 Liter (370 Cubic Foot) Continuous Horizontal Single Shaft Plow Mixer
Stock #ZG21400-02 Sold
Used Approximately 10,500 Liter (370 Cubic Foot) Continuous Horizontal Single Shaft Plow Mixer
Manufacturer: WAM Group SpA
Model: WAH 10500
Serial: 17WA150000159
Year: 2015
Driven by a 200 hp motor
Location: South USA
View Details
10,500 Liter (370 Cubic Foot) Continuous Horizontal Single Shaft Plow Mixer
Stock #ZG21400-01 Sold
Used Approximately 10,500 Liter (370 Cubic Foot) Continuous Horizontal Single Shaft Plow Mixer
Manufacturer: WAM Group SpA
Model: WAH 10500
Serial: 17WA150000158
Year: 2015
Driven by a 200 hp motor
Location: South USA
View Details
100 Liter Stainless Steel Ploughshare Mixer
Stock #HG62029 Sold
Stainless steel AISI 304 ploughshare mixer (machine was used for exhibition and presentation purpose). 100 litre total capacity, working capacity approx. 70 litre. Stainless steel cylindrical vessel has (1) top feeding/inspection door, dimensions 200 X 300 mm. Ploughshare type of mixing blades driven by EL. Motor 3 kW. Equipped with (1) chopper driven by EL. Motor 180 W. Has circular central bottom outlet with manually operated valve.
Location: SLOVAKIA
View Details
1200 Liter Littleford Model FKM1200D Stainless Steel Mixer
Stock #9598-02 Sold
Used Littleford model FKM1200D stainless steel mixer. 44 psi internal @ 320°F maximum working pressure. Jacket rated 75 psi. Has provisions for (4) choppers, but none installed. Includes gearbox but no motor. New 1999.
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
1200 Liter Morton Model FKM 1200 Stainless Steel Ploughshare Powder Mixer
Stock #U2138-1 Sold
Used ploughshare powder mixer by Morton (England) model FKM 1200 with total volume 1200 l and working volume in range from 480 up to 840 l. Contact parts made in stainless steel 304. Machine is driven by main electric motor with power 30/18.5 kW, 1450/730 rpm, 415 V, 50 HZ via gearbox. Mixing chamber has dimensions: diameter 960 mm x length 1690 mm. Shaft is equipped with 7 bolted ploughs. Mixer has three top connections - two with diameter 245 mm and one feeding inlet with diameter 350 mm. There are also two spraying nozzles for feeding a liquid into the mixing material. Central bottom discharge with diameter 350 mm, equipped with pneumatically operated valve. Mixer has electric control panel. Shipping dimensions: width 104 cm x length 240 cm x height 170 cm + drive 110 cm x 120 cm x 60 cm height. No technical documentation included. Mixer had been working on washing powder.
Location: PL
View Details
1200 Liter Stainless Steel Paddle Mixer
Stock #ZP63355 Sold
Used 1200 liter Littleford paddle mixer. Stainless steel construction, non-jacketed chamber. Driven by a 25 hp motor.
Location: South USA
View Details
1200 Litre Lodige Stainless Steel Mixer Type FKM1200D2H
Stock #B0170-01 Sold
Used LODIGE stainless steel mixer Type FKM1200D2H
Manufacturer: Lodige FKM1200D2H
Material: Stainless Steel
Capacity: 1200 litre total capacity, 950 litre useful capacity
Type of Blades: Ploughshare mixing blades
Discharge: Centre bottom outlet 300 x 900mm
Motor: 15kW, 220/380V, 50Hz, 1440 rpm
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
1275 Liter American Processor Model CO45/5608 Stainless Steel Plow Mixer
Stock #9784-12 Sold
Used American Processor model CO45/5608, type CPB-045 plow mixer.
Working capacity 45 cubic foot, 1275 liters.
Stainless steel plow mixer.
44" diameter X 78" long. Polish internal.
Jacket rated 125 psi @ 350 deg F.
NB stamp built 2000.
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
130 Liter Littleford Model FM-130D Stainless Steel Mixer
Stock #485V-17 Sold
Used Littleford model FM-130D jacketed mixer, stainless steel contact parts, steel jacket, jacket rated 75 psi @ 320°F, internal drum atmospheric @ 320°F, driven by 10 HP 3/60/230-460/1745 motor, approximately 2" internal shaft, 8" top feed, 10" bottom discharge, SN 11606, with controls.
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
130 Litre Morton B130D-1MZ Stainlesss Steel Ploughshare Mixer
Stock #VL1543 Sold
Used Morton model B130D-1MZ 316 stainless steel ploughshare mixer. Approximately 130 litre total capacity with approximately 39 to 91 litre working capacity (product dependent). Mixing chamber measures approximately 670mm long x 490mm diameter. Unit has 316 stainless steel external jacket rated 0.5 bar design pressure at 110 deg.c. Unit has stainless steel mixing shaft with (2) standard plough blades and (2) half plough blades driven by 15kw variable speed drive. Includes (1) multi-blade chopper driven by 4kw motor. Unit has approximately 520mm x 340mm hinged side inspection door. Has hand operated discharge value approximately 160mm x 120mm. Unit includes local operator control panel. Unit mounted on stainless frame.
Click on the link below to see a video of the machine running.
Location: UK
View Details
15,000 Litre Lödige Model FKM-15000D-12ZF Stainless Steel Ploughshare Mixer
Stock #RG1069 Sold
Used Lodige model FKM15000D-12ZF stainless steel ploughshare mixer. Also includes gearbox . Provision for choppers but none fitted.
Location: EU
View Details
1500 Litre Shengli Machinery Manufacture Model LDH-1,5P Stainless Steel Ploughshare Mixer
Stock #HG62428 Sold
Used Shanghai Shengli Machinery Manufacture model LDH-1,5P, stainless steel ploughshare mixer. Has 1500 litre total capacity and approx. 600-900 litre working capacity. Stainless steel mixing chamber has diameter approximately 980 mm x 1950 mm long, has (2) side feeding/inspection hatche 480 mm x 380 mm, also has (3) top inlet with diameter 2x 200 mm and 1x 300mm. Bolted plougshare mixing blades belt driven by 37 kW, 50 Hz. Standard rope type of sealing on horizontal shaft. Has (3) choppers directly driven by 5,5 kW, 50 Hz, 380 V, 1460 RPMs el. motors. Has rectangular 180 mm x 530 mm central bottom outlet with manually operated clack valve. Includes control panel with frequency converter, and carbon steel base.
Location: Czech republik
View Details
200 Litre Lödige Model FK 200D Carbon Steel Ploughshare Mixer
Stock #H4039-4 Sold
Used Lödige model FM 200D carbon steel ploughshare mixer. Has 200 litre total capacity and working capacity approx. 60 - 140 litre. Carbon steel mixing chamber has diameter approx. 500 mm x 1000 mm long, has (2) inspection hatches/inlets each has dimensions approx. 370 mm x 310 mm, has (1) central rectangular manually operated bottom outlet - approx. 160 mm x 115 mm. Bolted plougshare mixing blades directly belt driven by 2,2 kW, 380 V, 950 RPMs, 50 Hz el. motor. Includes start/stop control panel, each inspection hatch is protected by safety switch. Mounted on (4) legs.
Location: CZ
View Details
2000 Litre Lödige Model FKM-2000D Stainless Steel Ploughshare Mixer
Stock #RG9752 Sold
Used Lodige model FKM2000D 316 stainless steel ploughshare mixer. 2000 litre total capacity, working capacity 600-1400 litre. Driven by a 22kw 1455rpm motor and includes 3 choppers driven by 4kw 2870rpm motors. Mounted on a stand.
Location: EU
View Details
2500 Litre JR Boone Model 2500L Mild Steel Ploughshare Mixer
Stock #RG9954 Sold
Used JR Boone model 2500L mild steel ploughshare mixer. Approximately 2,500 litre capacity. Unit driven by approximatey 75kw motor. Includes (2) side entry refiners. Has hydraulically operated bomb door bottom discharge with powerpack. Has mild steel discharge hopper and mild steel inclined screw conveyor.
Location: UK
View Details
300 Litre Lodige FKM300D/1MZ Stainless Steel Ploughshare Mixer
Stock #VB0007-176 Sold
Used LODIGE stainless steel mixer - Type FKM300D/1MZ - Total capacity : 300 litre - Useful capacity : 240 litre - Plougshare - Control : motor : 5.5 kw – Hp 7.5 – 380 volts-Chopper : control : 4 kw – Hp 5.5 – Rpm 3000 – 380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
300 Litre Lödige Model FKM300D/1ZF Stainless Steel Ploughshare Mixer
Stock #L0990-03 Sold
Perry is offering a high quality refurbished, used Lodige model FKM300D/1ZF stainless steel (1.4541) ploughshare mixer. Lodige is recognised as a leading manufacturer of mixing equipment.
Manufacturer: Lodige
Material: Stainless steel
Serial Number: 6555
Capacity: 300 litre total capacity. 90-210 litre working capacity (product dependent)
Mixing Container Dimensions: 620mm Diameter X 1000mm Long.
Discharge Type: Centre Bottom Discharge with Manually Operated Flap Discharge Valve
Type Of Blades: (6) Ploughshare Mixing Blades
Motor Details: 5.5 kW 380 volt 3/50 950 rpm motor.
Also includes: Provision for Side Chopper but None Fitted.
- (1) side inspection door.
- Carbon steel frame.
This unit is ready to run. A video of this mixer is available below.
https://youtu.be/5Dd1CGXhKRE
Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Newton Aycliffe, UK
View Details
300 Litre Lödige Model FM-300D Mild Steel Ploughshare Mixer
Stock #RG9431 Sold
Used Lodige model FM-300D mild steel ploughshare mixer. 300 litre total capacity and 90-210 litre working capacity. Ploughshare mixing blades driven by 7.5 kW motor. Chopper driven by 4 kW 2895 rpm motor. Mounted on frame and includes controls.
Location: GERMANY
View Details
3000 Litre Lodige Mild Steel Ploughshare Mixer - Type FKM 3000 DZM
Stock #BG0104-01 Sold
Used LODIGE mild steel ploughshare mixer-Type FKM 3000 DZM-Total capacity : 3000 litre-Useful capacity : 2100 litre-Motor and gearbox-Equipment sold by appointment - Equipment sold as is
Location: FRANCE
View Details
3000 Litre Morton Model FM3000 Stainless Steel Ploughshare Mixer, Used
Stock #L1177 Sold
Comprehensively tested, used Morton model FM3000 stainless steel jacketed ploughshare mixer.
Manufacturer: Morton
Material: Stainless steel
Capacity: 3,000 litre total capacity. 1,400-2,100 working capacity (product dependent).
Mixing trough: 1140mm diameter X 3050mm long
Discharge Type: Centre bottom pneumatically operated discharge valve
Type Of Blades: Ploughshare mixing blades
Motor: 75/55 kW 415 volt 3/50 1460/735 rpm motor via a gearbox rated 14/1 reduction ratio
Also includes: Carbon steel jacket rated 3 bar working pressure.
A video of this mixer is available below.
https://youtu.be/w1Ofk7PrieM
You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
View Details
4 Litre Lodige Stainless Steel Plougshare Mixer Type M4E
Stock #VB0007-141 Sold
Used 4 litre LODIGE stainless steel plougshare mixer-Type M4E - No. 1450-On steel table-With 2 vessel : 1 stainless steel and 1 plastic-With control panel
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
4200 Litre Lödige Model FKM 4200D SON 316TI Stainless Steel Ploughshare Mixer/Dryer
Stock #RG7235 Sold
Used Lodige model FKM 4200D SON 316TI stainless steel jacketed ploughshare mixer/dryer. Approximately 4200 litre total capacity and 1260-2940 litre working capacity. Mixing trough approximately 1250mm diameter X 3450mm long. Has welded flat ends. Internal rated 0.5-5 bar design pressure. Has carbon steel jacket 200 litre capacity rated 5 bar design pressure. Has ploughshare mixing blades driven by 92 kW 380 volt 3/50 motor and gearbox at approximately 105 rpm.
Location: EU
View Details
5 Litre Lödige L5 Stainless Steel Ploughshare Jacketed Mixer
Stock #L1480-01 Sold
Used Lodige Model L5 stainless steel jacketed ploughshare mixer. Approximately 5 litre total capacity with approximately 1.5 to 3.5 litre working capacity (product dependant). Has stainless steel jacket rated 5 bar design pressure at -10 to 158 deg.c. Unit has stainless steel mixing shaft and ploughshare blades with electrical motor. Includes side entry chopper with drive. Unit is mounted on a mild steel mobile frame.
Location: Perry, Newton Aycliffe
View Details
50 Litre Lödige FM-50E/1 MZ Stainlesss Steel Mixer
Stock #RG9729 Sold
Used 321 stainless steel mixer without mixing shaft manufactured by Lödige model FM-50E/1 MZ. Capacity 50 Litres. Unit has an inspection hatch which measures 360x170mm. Outlet 110x90mm. Driven by 2.2 KW, 220/380 Volt, 180rpm motor. Chopper driven by 2.2 KW, 220/380 Volt motor. Unit is mounted on a frame on wheels. Includes switchgear
Location: Europe
View Details
50 Litre Morton FM50-D-1MZ Stainlesss Steel Ploughshare Mixer
Stock #L1480-02 Sold
Perry is offering a high quality refurbished , used Morton model FM50-D-1MZ stainless steel ploughshare mixer. Morton is recognised as a leading manufacturer of mixing equipment.
Manufacturer: Morton
Material: Stainless steel
Serial Number: M24285
Capacity: Working capacity of 35 litres (product dependent). Total capacity of 50 litres.
Type Of Blades: Ploughshare blades with electrical motor
Also includes: Side entry chopper with drive
-Mounted on a mobile frame.
Refurbishment
Bead blasted external stainless steel parts.
New castor wheels to stainless steel frame.
Serviced gear-box with new bearings, seals and gear oil.
Overhauled chopper with new bearings and O ring seals.
Fitted new pulley belt.
Manufactured new PTFE anti extrusion ring and serviced packing gland with new PTFE packing.
Re-gasketed end plate and outlet valve with silicone gaskets.
Spray painted main in our paint booth facility.
Test run.
A video of this mixer is available below.
https://youtu.be/JI4t_4eERWI
Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Newton Aycliffe, UK
View Details
600 Litre Lödige Model KM 600D-3ZMZ 321 Stainless Steel Ploughshare Mixer, Used Refurbished
Stock #L1045 Sold
Perry is offering a high quality, used Lodige Model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer. Lodige is recognised as a leading manufacturer of mixing equipment. This unit was last used on detergent.
Manufacturer: Lodige
Material: Stainless steel
Serial Number: 2611
Capacity: 300 litre working capacity. 600 litre total capacity (product dependent)
Mixing trough: 630 mm diameter X 2000 mm long
Discharge Type: electrically driven Weir plate discharge direct driven by motor and gearbox
Type Of Blades: Stainless steel ploughshare blades
Motor: 15 kW 380 volt 3/50 1500 rpm motor and sew type R100P gearbox.
Also includes: carbon steel jacket 85 litre capacity rated 5 bar design pressure at 158°C
- (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 volt 3/50 3000 rpm motors
- (2) side inspection doors.
- mounted on mild steel support frame with (4) wheels.
- Throughput performance approximately 18 cubic meter/hour with 1 minute residence time.
This unit is ready to run. A video of this mixer is available below.
https://youtu.be/LB1g3GN6tww
Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
View Details
600 Litre Morton Model FKM600D Stainless Steel Ploughshare Mixer
Stock #L1474-02 Sold
Used Morton model FKM600D 321 stainless steel contact parts ploughshare mixer. Approximately 600 litre total capacity with approximately 200-420 litre working capacity (product dependent). Mixing trough measures approximately 790mm diameter x 1240mm long. 321 stainless steel ploughshare blades belt driven by 37kw, 1500rpm, 3/50 motor with Renolds hydraulic coupling and Flender gearbox giving reduction ratio of 14:1. Has (2) 400mm x 450mm side access doors. Includes 300mm x 240mm centre bottom outlet with pneumatically operated valve. Unit is mounted on a mild steel frame.
Location: Newton Aycliffe, UK
View Details
600 Litre Stainless Steel Lodige Ploughshare Mixer
Stock #B0004-03 Sold
Used Stainless steel LODIGE ploughshare mixer 600 litres type FKM600 D2ZF-N°5655-Stainless steel cylindrical & horizontal vessel-2 lateral doors-2 feeding nozzles on the top-1 manual outlet on the bottom-Tools : ploughshare-Possibility 2 chopper (without chopper)-Drive : LS - Hp 20 - Rpm 1445 - 3x 380 Volts-Gearbox SEW - i=10.62-On frame-Without electric control panel
Location: NEUVILLE EN FERRAIN - FRANCE
View Details
680 Litre Grelbex Type MS600L Stainless Steel Ploughshare Mixer
Stock #RG9512 Sold
Used Grelbex Type MS600L Stainless Steel Ploughshare Mixer. Inside diameter 810 mm x inside length 1320 mm. Total volume 680 litres. Maximum capacity : approx. 475 litres. Ploughshare shaft driven by 18.5 kw motor. Hydraulic coupling, belt pulley transmission and reducer 1/12.5 - speed 116 rpm. Mechanical seal. 2 blade lump breakers driven by 4 kw motors 1500 rpm. 2 side manholes. 2 upper openings. 1 outlets 245 x 160 mm driven by pneumatic actuator. Overall dimensions : 2920 x 1600 x H. 1900 mm
Location: EU
View Details
750 Liter Stainless Steel Ploughshare Mixer
Stock #U806V-11 Sold
Second hand stainless steel contact parts ploughshare mixer with working volume 750 l. Mixing chamber has internal dimensions: diameter 1000 mm x L 1445 mm. Total volume of mixing chamber 1100l. Top feeding central inlet has diameter 400 mm and is equipped with lid. Central bottom discharge outlet has manually operated valve. There is inspection manway at side wall with dimensions 500 mm x 475 mm and bolted lid. Mixer has shaft with three ploughs and two paddles working close to side walls. All mixing elemets are bolted. Shaft is belt driven by el motor 15/9 kW, 1465/725 rpm, 380 V, 50 hz and reducer. Working rotation of shaft up to 118 rpm. Mixer is mounted on carbon steel supporting frame and side supports. There are two posts for installing choppers, but choppers are not included.
Location: PL
View Details
80 Litre Lödige FM-80 D 1Z Stainless Steel Mixer
Stock #RG9730 Sold
Used stainless steel mixer manufactured by Lödige model FM-80 D 1Z. Capacity 80 Litres. Top connections 200mm diameter. Inspection hatch 320 x 310mm. Outlet 160 x 120mm. Unit has a jacket. Working pressure unknown. Unit has adjustable packing glands. Driven by a 3.7/4.4 KW, 380 Volt motor. Includes chopper driven by a 3.0 KW, 220/380 Volt. Chopper speed 2880 rpm. Includes switchgear.
Location: Europe
View Details
80 Litre Winkworth Model RT80 Stainless Steel High Speed Mixer, Used Refurbished
Stock #L1432-01 Sold
Perry is offering a high quality refurbished, used Winkworth model RT80 304 stainless steel high speed mixer. Winkworth is recognised as a leading UK manufacturer of mixing equipment. This unit has an approximate working capacity of 80 litres. Mixing chamber measures approximately 500 mm diameter x 700 mm long. Includes T arm mixing blades driven by a 4 kw 415 volt 3/50 1420 rpm motor via a gearbox. Unit also includes side entry multiple blade chopper direct driven by a 4 kw 415 volt 3/50 2890 rpm motor. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
View Details
800 Litre Morton Model FKM800 Stainless Steel Ploughshare Mixer
Stock #VL1230 Sold
Used Morton model FKM800 stainless steel ploughshare mixer. Approximately 240-560 litre working capacity and 800 litre total capacity. Mixing trough measures approximately 1800mm straight side X 760mm diameter. Stainless steel shaft with ploughshare blades driven by 15kW, 1470rpm 415volt, 3/50 motor through gearbox. Unit includes (2) stainless steel side entry choppers direct driven by (2) 4kW, 2890rpm, 415 volt, 3/50 electric motors. Unit includes local control panel.
Location: UK
View Details
