Plant - Agricultural Chemicals(2)
Plant - Air Separation, Oxygen, Nitrogen, Hydrogen(24)
Plant - Biorefining(9)
Plant - Brewery, Distillery, Alcohol(13)
Plant - Dairy Milk Ice Cream(3)
Plant - Edible Oil(13)
Plant - Foods(38)
Plant - Industrial Inorganic Chemicals(5)
Plant - Industrial Organic Chemicals(2)
Plant - Mineral Processing, Mining, Cement(11)
Plant - Miscellaneous(22)
Plant - Petrochemical, Refinery & Asphalt(5)
Plant - Pharmaceutical(1)
Plant - Plastic Materials, Synthetic Resins and Rubber, Manmade Fibers(4)
Plant - Plastic Rubber(3)
Banbury Type Mixers(6)
Continuous Mixers(10)
Dispersion Mixers Europe(70)
Double Arm Mixers(34)
High Intensity Mixers(59)
Intensive Pharma Mixers(22)
Miscellaneous Powder Mixers(7)
Mixer Miscellaneous(24)
Mixer Universal(33)
Nauta Mixers(54)
Planetary Mixers(81)
Plowshare Mixers(48)
Ribbon Mixers(47)
Ribbon Mixers Europe(42)
Tumbling Mixers (79)
Atmospheric Tray Dryers(7)
Batch Fluid Bed Dryers(44)
Conical Rotary Vacuum Dryers(19)
Continuous Fluid Bed Dryers(13)
Conveyor Dryer(5)
Conveyor Dryer ( Sandvik Type )(3)
Double Drum Dryers(1)
Flash Dryer (4)
Other Dryers(1)
Pan Dryers(12)
Rotadisc Dryer(3)
Rotary Hot Air Dryers(7)
Rotary Kiln Dryer(2)
Rotary Multi-Pass Dryers (Heil Type)(2)
Rotary Steam Tube Dryer (4)
Rotary Tray Dryers(3)
Cartridge Filters(62)
Filter Parts(1)
Nutsche Filters(21)
Osmosis and Membrane Filters(17)
Plate & Frame Filter Presses(45)
Plate & Frame Filter Presses Europe(29)
Pressure Leaf Filters (1-199 SQFT)(19)
Pressure Leaf Filters (200 - SQFT & Up)(7)
Pressure Leaf Filters, Europe(14)
Rotary Vacuum Filters - Drum(5)
Rotary Vacuum Filters - Drum, Europe(7)
Rotary Vacuum Flters, Disc(1)
Vacuum Belt Filters(5)
Bins and IBCs(180)
Glass Lined Tanks(62)
Glass Lined Tanks, Europe(12)
Pipe Glass(2)
Stainless Steel Tanks in Europe 10,000-19,999 Litres(28)
Stainless Steel Tanks in Europe 5,000-9,999 Litres(56)
Stainless Steel Tanks in Europe Less than 5,000 Litres(406)
Stainless Steel Tanks in Europe Over 20,000 Litres(31)
Stainless Steel Tanks Less than 1,000 Gallons(211)
Stainless Steel Tanks, 10,000 to 19,999 Gallons(14)
Stainless Steel Tanks, 1000 to 1999 Gallons(41)
Stainless Steel Tanks, 20,000 Gallons and Up(3)
Stainless Steel Tanks, 2000 to 3999 Gallons(33)
Stainless Steel Tanks, 4000 to 5999 Gallons(25)
Stainless Steel Tanks, 6000 to 9999 Gallons(7)
Steel Tanks in Europe(1)
Steel Tanks Less than 10,000 Gallons(9)
Steel Tanks, 10,000 Gal. & Up(2)
Carbon Steel Reactors(1)
Glass Lined Agitators(172)
Glass Lined Baffles(135)
Glass Lined Covers(137)
Glass Lined Drives(67)
Glass Lined Reactor Parts(32)
Glass Lined Reactors(90)
Glass Lined Reactors Europe 5,000 Litres and Up(13)
Glass Lined Reactors, Europe Less than 5,000 Litres(29)
Reactor Parts - Agitator Drives(96)
Reactor Parts - Agitators(5)
Stainless Steel Reactors - Europe 5,000-19,999 Litres(13)
Stainless Steel Reactors - Europe Less than 5000 Litres(62)
Stainless Steel Reactors - Europe More than 20000 Litres(13)
Stainless Steel Reactors 2000 Gallons and Up(8)
Stainless Steel Reactors 500 to 2000 Gallons(18)
Stainless Steel Reactors Less than 500 Gallons(65)
Rectangular Screens(32)
Rotary Screens(25)
Round Screens(41)
Round Screens - Europe(12)
Screen Dewatering(1)
1 1/2" Extruders(4)
2 1/2" Extruders(5)
3 1/2" Extruders(5)
4 1/2" Extruders(6)
8" Extruders(1)
Co-Rotating Twin Screw Extruders(16)
Counter-Rotating Twin Screw Extruders(8)
Extruder Parts, Cleaners, and Accessories(1)
Extruder Screws(11)
Extruder Temperature Panels(10)
Extrusion Line Feeders(10)
Pug Mills - Vacuum Extruder(1)
Rubber Extruders(2)
Cutter Film Densifier(3)
Cutter Guillotine(5)
Cutters/Shredders(23)
Granulator Parts(13)
Pelletizer Parts(1)
Strand Pelletizers(18)
Underwater Pelletizers(13)
Butter or Margarine Machinery(7)
Cooker - Cooler/Bottle Conveyor Type(1)
Cooker, Rendering Type(3)
Fishmeal(2)
Food Extruders(5)
Hollow Screw Cooker Or Cooler(11)
Meat Equipment(8)
Miscellaneous Equipment for Food Processing(31)
Oils and Fats Processing Equipment(22)
Pasteurizers(4)
Rendering Equipment(12)
Vegetable Cutters(6)
Harvestor(1)
Sugar and Pulp Dryers(6)
Sugar Beet Diffuser(5)
Sugar Beet Factory(1)
Sugar Beet Preparation(7)
Sugar Beet Slicer(4)
Sugar Cane Factory(7)
Sugar Cane Preparation(21)
Sugar Centrifuges(22)
Sugar Equipment, Miscellaneous(17)
Sugar Evaporator, Pan, Crystallizer(19)
Sugar Filters(6)
Sugar Pulp Dewatering Press (10)
Bottle Cleaner(2)
Checkweighers(7)
Cottoner(3)
Feeder, Miscellaneous(32)
Feeder, Vibrating Pan(6)
Filler Form Fill & Seal(20)
Filler Form Fill & Seal Liquids(9)
Filler Liquid Gravity(3)
Filler Liquid High Speed(2)
Filler Liquid Pressure Low Speed(4)
Filler Paste - Piston - Pocket(19)
Filler Powder Bag & Box(24)
Filler Powder Capsule - Ampule(9)
Filler Tablet & Counter(5)
Filler Tube(5)
Your Cart is Empty.
Home » Mixers » Ribbon Mixers Europe
Stock #L1588
Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve.
Location: Newton Aycliffe, UK
Stock #HG62482
Used SPP (Slovak republic), typ M300-1, stainless steel ribbon blender. Approximately 300 litre total capacity, internal dimensions : 880mm x 830 mm, driven by 8kW/17A/ 3/50Hz/IP44, motor.reportedly good condition . Shiping dimensions :1700 x 1010 x 1600mm high, 1393 kg.
Location: SK
Stock #RG9377
New Coprinox model MX010 304 stainless steel double ribbon blender. Has 1,000 litre total capacity and 500-700 litre working capacity. Mixing trough approximately 910mm wide X 1250mm deep X 1620mm long with 2B finish. Double ribbon direct driven by 5,5 kw geared motor at 35 rpm with stuffing box seals. Pneumatically operated plug valve and small stainless steel filter on top vent nozzle. Designed for use with maximum product size 3mm and bulk density 1 kg/lt.
Location: EU
Stock #HG62273
Used Machinefabriek Kreber B.V., Holland model MIXER TYPE C approximately 1000 litre working capacity and 1200 litre total capacity stainless steel steel ribbon blender. Has approximately 960mm wide x 1380mm long x 1000mm deep mixing trough. Mixing trough has mild steel jacket rated atmospheric pressure. Stainless steel interrupted ribbon direct driven by 12.5 kw, 400 volt 3/50 AEG motor through Vector gearbox. Includes stainless steel hinged grid with spray bar and also additional hinged solid lid. Has pneumatically operated round bottom discharge approx. dimeter 300 mm and also equipped by electrical mechanism for tilt discharge. Mounted on carbon steel frame. Includes el. switchboard.
Location: CZ
Stock #UG6192
New Polish made ribbon blender with working capacity 1000 l made of stainless steel with 304 grade. Mixer is settled on a stainless steel frame with 304 grade. The ribbon agitator is driven with electric motor 11 kW through a gearbox. Agitator working speed is variable up to 40 rpm. Top inlet with technological pipes located nearby. Central bottom outlet with manual rotary valve. Unit includes local control panel equipped with: emergency kill switch, main on/off switch, on/off agitator switches, +/- agitator speed switches, agitator speed digital gauge, current agitator load digital gauge and electric switchboard with frequency converter.
Location: Poland
Stock #RG5800
Used Werner & Pfleiderer type simplex 18 WX BS stainless steel ribbon type blender for PVC compounding. Approximately 1000 litre working capacity and 1350 litre total capacity. Mixing trough measures approximately 1345mm long X 900mm wide X 900mm deep. Has stainless steel single interrupted ribbon driven by 15kW electric motor. Speed of blade is 41 rpm. Manual open and closing of cover. Does not include platform.
Location: GERMANY
Stock #L1495
Comprehensively tested, used approximately 1,950 litre working capacity (approximately 2,590 litre total capacity) product dependent, ribbon blender. Material: Stainless steel trough, ribbon, contact parts. Capacity: Approximately 1,950 litre working capacity (approximately 2,590 litre total capacity) product dependent. Mixing trough: Measures approximately 1660mm long x 1230mm wide x 1,400mm high. Unit has a dimple jacket on bottom section of the mixing tough. Type of blade: Stainless steel single uninterupted ribbon belt driven by electric motor and gearbox. Discharge Type: Centre bottom discharge with valve. A video of this mixer is available at: https://youtu.be/N-03IVe4Z5o
Location: Newton Aycliffe, UK
Stock #L1572-01
Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 100 litre capacity Mixing chamber: Approximately 700mm x 400mm x 500mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 4 kW Also includes: Local controls, stainless steel hinged lid with clamps and stainless steel mobile frame. Click on the link below to see a video of the machine running. https://youtu.be/0QRlDs8wQEc
Location: Newton Aycliffe, UK
Stock #H2077-V
Used Buhler horizontal carbon steel ribbon blender, type DDM A10. Total volume 1000 ltr.Driven by 7,5 kW el. motor. Mixing trough measures approximately 2000mm long x 450mm diam. Bottom outlet is pneumatically operated
Location: CZ
Stock #U2435-1
Used stainless steel ribbon mixer made by Consumasz (Poland) type M-01 with total volume 1100 l and working volume 850 l. Mixing chamber has internal dimensions: L 1990 mm W 830 mm x D 1175 mm. Mixer is feeded from the top via cylindrical sifter type PC-400, driven by gearbox and el motor 4 kW, 1445 rpm, 220/380 V, 50 hz, or directly through inlet 205 mm x 205 mm. Mixer has single shaft equipped with welded double ribbons. Shaft is driven via gearbox and el motor 15 kW, 1460 rpm, 380 V, 50 hz. Gearbox reduction i= 36,9. Working rotation of shaft up to 39 rpm. Mixer has side wall inspection manway with dimensions 540 mm x 365 mm, and bolted stainless steel lid. Central bottom discharge outlet has diameter 200 mm and is equipped with manually operated valve. Product is droped into the hopper of discharge screw conveyor with screw diameter 200 mm and working length 1000 mm. Power consumption on screw conveyer 1.1 kW. Mixer is mounted on supporting carbon steel frame. There is included with machine: electric control cabinet and work platform with stairs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #L1382-02
Comprehensively tested, used Winkworth model FU42MS carbon steel ribbon blender. Manufacturer: Winkworth Material: Mild steel trough, ribbon, hinged lid and base. Capacity: Approximately 2,000 litre working capacity and 2,800 litre total capacity (product dependent) Mixing trough: Approximately 2400mm long x 1070mm wide x 1200mm high Discharge Type: Centre bottom discharge but no valve fitted. Type Of Blades: Mild steel single interrupted ribbon. Motor: 18.5kw 3/50 1460rpm electric motor through David Brown Radicon model CNU 12"-L gearbox rated 70/1 reduction ratio at approximately 7 rpm .
Location: Perry England Warehouse
Stock #L1260-02
Comprehensively tested, used approximately 2,500 litre carbon steel ribbon blender. Material: Mild steel trough and ribbon. Capacity: Working capacity of approximately 2,500 litre and total capacity approx 3,500 litre. Mixing trough: Approximately 3500mm long x 1700mm wide x 1800mm deep. Type Of Blades: Single ribbon. Motor: 17.5 kw 380-690 volt 965 rpm 3/50 motor through a Bonfigliolo gearbox with a ratio of 46.7.
Location: Perry England Warehouse
Stock #L1157-01
Comprehensively tested, used Kemutec Gardner model 2500RH Hastelloy C276 jacketed ribbon blender/dryer. Manufacturer: Kemutec Gardner Material: Stainless steel External jacket: External 316 stainless steel jacket rated 2.97 bar at 133 degrees Celsius. Internally rated atmospheric pressure at 50 degrees Celsius. Capacity: 2500 litre working capacity and approximately 4200 litre total capacity. Dimensions: Mixing chamber approximately 1450mm wide X 1750mm deep X 3000mm long. Type: Single interrupted ribbon belt driven by 15 kW 400 volt 3/50 1476 rpm motor through a David Brown Radicon gearbox ratio 80/1 with an 18 rpm output. Also includes: -Flat bolted lid with manway. -Center bottom outlet.
Location: Perry England Warehouse
Stock #U2284
Used stainless steel paddle mixer for continous work by Gloucester Material Handling Ltd (UK) with total volume 2700 l. Internal diameter of mixing chamber 1100 mm x 2840 mm length. Top feeding inlet has dimensions: 300 mm x 300 mm. Bottom front outlet has dimensions 300 mm x 440 mm. Mixer is equipped with stainless steel mixing shaft with welded 21 paddles. Front and back walls are bolted. Front wall is equipped with mechanical sealing of shaft. Back wall has standard sealing of shaft. Mixer had been running with electric motor 55 kW, 1500 rpm - but motor is not included. Mixer is equipped with gearbox and new mechanical sealing. No control panel included. Technical drawings of mixer and shaft are included. Mixer had been running in food production with reported output about 8-12 tons per hour. Machine is mounted on 6 stainless steel legs.
Location: PL
Stock #B0044-02
Used Karl Schnell model 740/750 stainless steel jacketed twin ribbon blender. Approximately 200 litre capacity (Product Dependent). Mixing trough measures approximately 920mm long x 870mm wide x 600mm deep. Has stainless steel jacket on bottiom section of mixing trough. Has twin stainless steel uninterupted ribbon each driven by 1.8kw eletcric motor. Unit has stainless steel hinged lid with pneumatic open/close system. Unit has (2) end discharge ports but no valves fitted.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1509-03
Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Discharge Type: Centre bottom discharge with manual plug type valve Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. https://youtu.be/7EdEz13aEU4
Location: Newton Aycliffe, UK
Stock #U1736-2
Used stainless steel paddle mixer with total volume 200 litres. Machine has heating coil. Feeding inlet located at top of mixer and has diameter 300 mm. Discharge by bottom side by 300 mm diameter valve.
Location: Perry Poland Warehouse
Stock #B0193-01
Used ROUSSELLE mild steel ribbon mixer Type MH20 - N°715 Useful capacity : 2000 litre Ribbon Ø 1020 x 2300 mm Pneumatically controlled outlet 7.5 kw - Hp 10 - 3x 230/400 volts geared motor
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2317-2
Used carbon steel paddle type powder mixer. Mixer has total volume about 360 l and working volume up to 250 l. Internal mixing chamber has dimensions: W 590 mm x L 1380 mm x D 540 mm. Machine has single shaft with bolted 4 bars. Each bar has welded 7 padles. Shaft is driven by el motor 4 kW, 380 V, 50 hz and gearbox. Working rotation of shaft up to 153 rpm. Top feeding, central bottom discharge with valve. Mixer is mounted on carbon steel frame. Top cover bolted, has place for mounting 4 spraying stainless steel nozzles, included with machine. Last time used on animal feed production.
Location: PL
Stock #VB0135-01
Used GARDNER stainless steel ribbon mixer.Capacity of approx. 2,178 litres and a total capacity of approx. 2,744 litres.The U-shaped stainless steel chamber is approximately 2438 mm long, 1067 mm wide and 1170 mm deep. The unit has a single stainless steel shaft with a single ribbon interposed, driven by an 18.5 kw, 3x 415 volts motor via a David Brown Radicon gearbox, with an output speed of approximately Rpm 37. Includes lower outlets but no valves are fitted.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1572-04
Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 3.6 litre Working Capacity and 4.6 litre Total Capacity Mixing Trough: Approximately 200mm x 150mm x 170mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 0.15 kW
Location: Newton Aycliffe, UK
Stock #RG2046
Used Viani stainless steel double ribbon blender. Approximately 300 litre working capacity and 570 litre total capacity (Product Dependant). Mixing trough measures approximately 1,500mm long x 600mm wide x 700mm deep. Double helical interrupted outer ribbon and contra uninterrupted inner helical ribbon direct driven with electic motor/gearbox. Air purged packing glands on shaft. Unit has central bottom discharge with manual valve and counter-balanced hinged lid. Mounted on stainless steel frame with castors for easy manipulation. Control panel included.
Location: South Europe
Stock #H2078-V
Used Buhler horizontal carbon steel ribbon blender, type DDM A40. Total volume 4000 ltr.Driven by 22 kW el. motor. Mixing trough measures approximately 3,200mm long x 700mm diam. Bottom outlet is pneumatically operated
Location: CZ
Stock #H4372-2
Used stainless steel single shaft ribbon blender. Approximately 415 litre working capacity (product dependent), total capacity approximately 570 litre. Mixing trough measures approximately 1495 mm long x 595 mm wide x 695 mm deep. Has single shaft with double interrupted ribbon, outside ribbon has diameter approximately 590 mm and inside ribbon has diameter approximately 340 mm. Shaft is driven through gearbox by 4 kW, 1435 rpm, 240/400 V, 50 Hz electric motor. Has stainless steel hinged lid and centre bottom discharge. Includes control panel.
Location: Perry Czech Warehouse
Stock #L1381
Comprehensively tested, used Winkworth model GU430 304 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel Capacity: 430 litre working capacity and 570 litre total capacity (Product dependent). Mixing trough: 1,500mm long x 600mm wide x 700mm deep Type Of Blades: Single interrupted ribbon Also includes: counter-balanced hinged lid. A video of this mixer is available below. https://www.youtube.com/watch?v=vZa5EgTt5Qc
Location: Perry England Warehouse
Stock #L1531-01
Comprehensively tested and refurbished, used Winkworth model GU430SSC W 321 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless Steel (321) Capacity: 430 Litre Working Capacity. 570 litre Total Capacity (Product Dependent) Mixing Trough: 1,500mm Long x 600mm Wide x 700mm Deep Type Of Blades: Single Interrupted Ribbon Motor: 4kW ESR3 Inline Geared-Motor Stripped main unit apart Polished internally to 0.8Ra Shot blasted all mild steel parts and bead blasted all stainless external parts. Completely overhauled geared motor with new shafts, gears, bearings, seals with an oil change. Fitted new inserts to the flanged bearings on shaft ends. Serviced packing gland with new PTFE packing. Fabricated new stainless steel lid. Re-gasketed trough and lid. Spray painted in our paint booth facility. Reassembled and test ran. A video of this mixer is available below. https://youtu.be/zy5ve20bT68
Location: Newton Aycliffe, UK
Stock #U2440-2
Used horizontal stainless steel mobile ribbon blender. Mixing chamber has dimensions L 125 cm x W 59,5 cm x depth 69 cm. Total volume of mixing chamber 450 l. Working volume about 300 l. Mixer has single stainless steel shaft with welded double ribbons. Shaft is belt driven by el motor 3 kW, 1410 rpm, 220/380 V, 50 hz. Top open. Central bottom discharge with dimensions 16 cm x 14 cm and manually operated slide valve. Mixer has local start/stop panel. Machine is mounted on carbon steel supporting frame and 4 wheels.
Location: Perry Poland Warehouse
Stock #H4325-4
Used SPP (Slovak republic), type M450-1, stainless steel ribbon blender, approximately 450 litre total capacity, driven by 2 X 4kW/17A/3/50hz/IP44, motor. Shipping dimensions :1890 x 1035 x 1680mm hign, total weight: 1710 kg.
Location: EU
Stock #B0114-02
Used GARDNER stainless steel ribbon blender-Type 400L55-Total capacity : 450 litre-Useful volume : 400 litre-Vessel Ø 600 x 1650 mm - drain Ø 150 mm-Motor and gearbox : Hp 5.5
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VB0007-01
Used Stainless Steel Value Recovery VRS50 Delux ribbon blender. Suitable for processing food waste. Electric heating - vacuum. Includes electrical control cabinet. Driven by a 7.7kW/HP10 motor. Mounted on an electric frame.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1572-05
Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 50 Litre Capacity Mixing Trough: Approximately 540mm x 320mm x 400mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 2.3 kW Also includes: Local controls, stainless steel hinged lid with clamps and perspex cover and stainless steel mobile frame. Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Stock #H2076-V
Used Buhler horizontal carbon steel ribbon blender, type DDM A5. Total volume 500 ltr. Driven by 5,5 kW el. motor. Mixing trough measures approximately 1550mm long x 350mm diam. Bottom outlet is pneumatically operated
Location: Europe
Stock #L1461
Comprehensively tested, used Used Gardner 316 stainless steel jacketed ribbon blender. Manufacturer: Gardner Material: Stainless steel Capacity: 530 litre working capacity. 700 litre total capacity Mixing trough: 700mm wide X 860mm deep X 1150mm long Type Of Blades: Double interrupted ribbon belt Motor: 7.5kW 3/50 motor, through a David Brown Radicon gearbox Also includes: External stainless steel jacket no rating plate present. -Flat hinged lid with manway. -Centre bottom pneumatically operated outlet.
Location: Perry England Warehouse
Stock #H4226-3
Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge.
Location: Perry Czech Warehouse
Stock #U806V-12
Second hand stainless steel contact parts ribbon blender with total volume 660 l and working volume 490 l. Mixer has mixing chamber with internal dimensions: W 610 mm x L 1676 mm x D 710 mm. Top open, covered with stainless steel lid. Mixer has stainless steel shaft with welded interrupted single ribbon, driven via gearbox and el. motor 2.9 kW, 1440 rpm, 400/440V, 50 hz. Working rotation of mixing shaft 40 rpm. Discharge outlet has dimensions 160 x 160 mm and is equipped with manually operated valve. Mixer is mounted on carbon steel supporting pedestal. Included carbon steel service platform with stairs. Last time used in food industry.
Location: PL
Stock #L1544
Comprehensively tested, used Winkworth reportedly model GU660 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel Capacity: 660 litre (product dependent) Mixing trough: 1,750mm long x 700mm wide x 790mm deep Discharge Type: air operated discharge value Type Of Blades: single interupted ribbon Motor: 7.5kw, 1450rpm, 415volt, 3/50 motor through Opperman type HTM7 gearbox rated 38.2/1 reduction rated, 37rpm output. Also includes: Hinged lid with clamps. -Control panel with castell key interlock. -Mild steel mobile base. A video of this mixer is available below. https://youtu.be/l9sjUmfQfw4
Location: Newton Aycliffe, UK
Stock #RG9468
Used approximately 800 litre 316 stainless steel ribbon blender. Motor 10 kw. Measures: Shaft diameter: 80mm, Length : 2300mm, width with motor: 1300mm, height 1800mm, shell thickness 4 mm
Location: EU
Stock #L1462-03
Comprehensively tested, used stainless steel horizontal ribbon blender. Material: Stainless steel Capacity: 800 litre working capacity. 950 litre total capacity (product dependent) Mixing trough: 1,860mm long x 760mm wide x 850mm deep Discharge Type: centre bottom discharge (no value currently fitted). Type Of Blades: single interupted stainless steel ribbon Motor: 15kw motor Also includes: stainless steel hinged lid A video of this mixer is available below: https://youtu.be/0f2zZCHJLS4
Location: Perry, Newton Aycliffe, UK
Stock #L1559-01
Comprehensively tested and refurbished, used Winkworth model GU13 321 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel trough, ribbon, hinged lid, and contact parts. Year of Manufacture: 1980 Capacity: 90 litres (product dependent) Mixing trough: 910mm x 330mm x 400mm Discharge Type: Bottom outlet with manually operated slide valve Type Of Blades: Stainless steel single interrupted ribbon Motor: 1.5kw 1400 rpm motor Revolutions Per Minute: 43 rpm A video of this mixer is available at https://youtu.be/cglr1uOp9iM.
Location: Newton Aycliffe, UK
Stock #VB0007-07
Used stainless steel screw blender with a total volume of approximately 900 litres. Internal dimensions of the tank approximately 800 mm wide x 1900 mm long. Outlet Ø 100 mm. Driven by a geared motor 1.5 Kw / Hp 2 - Rpm 7,5 - 230/400 Volts.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2428-2
Used horizontal stainless steel cooker with total volume 1300 l. Chamber has internal dimensions: W 90 cm x L 296,5 cm x D 60 cm. Machine has single shaft with welded ribbon. Shaft is driven by reducer and el motor 1.5 kW, 1461 rpm, 230-400 V, 50 hz. Working rotation of shaft up to 6.6 rpm. Top of the cooker is open, equipped with two section stainless steel covers, rised manually. Each section of cover has length 150 cm. Bottom and side wall are insulated and layered with heating/cooling jacket. Machine has discharge outlet close to the wall where drive is mounted. Outlet has diameter 250 mm in chamber with reduction to 100 mm. Feeding inlet connection is on the side wall, and has diameter 100 mm. There is also connection to cleaning system, which is equipped with 4 splashing nozzles. Machine is mounted on four stainless steel legs. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #VB0007-153 Sold
Used CHANTALAT stainless steel ribbon blender 800 litre-Ribbon Ø 820 mm - Length 1500 mm-Side outlet hatch-Tilting stainless steel cover
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #RG9531 Sold
Little used approximately 1,000 litre capacity stainless steel ribbon blender. Stainless steel double ribbon driven by a 11 kW, 1460 rpm, 380 volt, 3/50 motor. Includes stainless steel hinged lid. Steps are included. Mounted on a mobile frame.
Location: UK
Stock #RG8305 Sold
Used 1,000 litre stainless steel double shaft paddle mixer made by Velati Milano. Trough size approximately 1050mm X 1580mm X 650mm. Unit is without cover. Discharge outlet (X2) 365mm X 300mm, pneumatically operated. With motor and switch.
Location: EUROPE
Stock #L1436-03 Sold
Used Gardner model 1200H 304 stainless steel ribbon blender. Approximate working capacity 1200 litre, approximate total capacity 2050 litre. Mixing trough measures approx 2400mm long x 910mm wide x 1000mm deep. Has stainless steel interrupted ribbon driven by 2.2kw, 415 volt, 3/50, 930rpm motor through a gearbox. Unit includes two bottom discharges with valves.
Location: Perry England Warehouse
Stock #RG9574 Sold
Used Gardner stainless steel ribbon blender. Approximately 1200 litre working capacity and 1845 litre total capacity. Mixing trough approximately 760mm wide x 2330mm long x 825mm deep. Single interrupted ribbon direct driven by 11 kW 415 volt 3/50 1450 rpm motor via Radicon gearbox at approximately 30-35 rpm. Has plummer block bearings and air purged seals. Has bolted flat cover with 500mm flanged connection and 500mm x 600mm access hatch with hinged lid. Includes 200mm diameter centre bottom discharge
Location: UK
Stock #L1572-03 Sold
Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 10 Litre Capacity Mixing Trough: Approximately 220mm x 200mm x 200mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 0.19 kW Also includes: Local controls, stainless steel hinged lid with clamps, perspex cover and stainless steel mobile frame. Click on the link below to see a video of the machine running.
Location: Newton Aycliffe, UK
Stock #L1566 Sold
Perry is offering a high quality, used Winkworth model UT1000 304 stainless steel ribbon blender. Winkworth is recognised as a leading UK manufacturer of mixing equipment. Manufacturer: Winkworth Material: Stainless steel trough, ribbon, hinged lid, and contact parts. Serial Number: 16869 Capacity: 1,000 litre working capacity. 1,326 litre total capacity (product dependent) Mixing trough: 1,740mm long x 870mm wide x 950mm deep. Discharge Type: Bottom outlet with pneumatically operated slide discharge valve. Type Of Blades: Stainless steel single interrupted ribbon. Motor: 11kW, 400/690volt, 3/50 motor/gearbox. Also includes: Stainless steel hinged top lid. This unit is ready to run. A video of this mixer is available below. https://youtu.be/KqyUODyer7Y Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Newton Aycliffe, UK
Stock #U2405 Sold
Used stainless steel powder mixer by Halvor Forberg type 786. Mixing chamber has internal dimensions: W 680 mm x L 570 mm x D 430 mm. Total volume of mixing chamber about 120 l. Mixer has twin shafts with welded paddles, each shaft has 14 paddles. Shafts are chain driven by el motor and gearbox. Machine has two bottom discharge outlets with dims 95 mm x 470 mm, operated manually. Top half covered with stainless steel lid, half with plexiglass lid. Machine has local start/stop panel. Mounted on four legs equipped with wheels.
Location: Perry Poland Warehouse
Stock #U2381 Sold
Used stainless steel ribbon mixer with total volume about 1400 l and working volume about 1000 l. Machine has mixing chamber with internal dimensions: L 2000 mm x W 827 mm x D 910 mm. Top open, with manually operated safety bars. Mixer has shaft with welded ribbon, with diameter 800 mm. Shaft and ribbon are driven by gearbox and el. motor 3 kW, 1455 rpm, 380-420 V, 50 hz. Working rotation up to 14 rpm. At the whole length of the mixing chamber, at the bottom, there is a mounted discharge stainless steel screw with diameter 400 mm. Discharge outlet has dimensions: W 400 mm x L 690 mm. Screw is driven by gearbox and el motor 5.5/4.4 kW, 400 V, 50 hz. Working rotation of screw 45/23 rpm. Mixer is equipped with two stainless steel pipes welded to the side walls, close to the top. Each pipe has with set of nozzles for adding liquids/washing mixing chamber. Machine is mounted on supporting frame with three stainless steel legs. Last time machine had been working in food industry.
Location: Perry Poland Warehouse
Stock #U2380 Sold
Used stainless steel paddle mixer by Winkworth (UK) model XF200L. Mixing chamber has internal dimensions: L 120 cm x W 100 cm x D 110 cm. Total volume of mixing chamber about 1800 l, working volume about about 1300 l. Mixer has stainless steel shaft with six bolted arms and paddles. Shaft is driven via gearbox and el motor 2.2 kW, 1410 rpm, 400/690V, 50 hz. Working rotation of shaft up to 5.6 rpm. Discharge via bottom mounted screw with diameter 200 mm. Screw is driven by gearbox and el. motor 5.5 kW, 1430 rpm, 400/690 V, 50 hz. Working rotation of screw up to 39 rpm. Top of the mixer is open. On side wall there is an inspection manway with lid dimensions 60 cm x 30 cm. Machine is mounted on stainless steel supporting pedestal. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #B0131-01 Sold
Used Double jacket stainless steel ribbon blender-Total capacity : 220 litre-Useful capacity : 190 litre-VEssel : width 550 mm - length: 800 mm-Drain : 100 x 100 mm-Double jacket on background-Motor : 2.2 kw - Hp 3 - 230/400 volts and reduction gear
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1436-01 Sold
Used Winkworth model UT2000 304 stainless steel ribbon blender. Approximately 2,000 litre working capacity and 2,920 litre total capacity (Product Dependent). Mixing trough measures approximately 2150mm long x 1100mm wide x 1200mm deep. Has stainless steel single interrupted ribbon chain driven by 4kw, 20rpm, 415 volt 3/50 electric motor through a gearbox giving approximately 5rpm ribbon speed. Unit has hinged lid. Unit includes two bottom discharges with valves.
Location: Perry England Warehouse
Stock #L1487-03 Sold
Used Gardner approximately 2,178 litre working capacity and approximately 2,744 litre total capacity (product dependent) stainless steel ribbon blender. Stainless steel U trough chamber measures approximately 2438mm long x 1067mm wide x 1170mm deep. Unit has stainless steel single shaft with single interupted ribbon driven by a 18.5kw 415 volt 3/50 motor via a David Brown Radicon gearbox with an output speed of approximately 37rpm. Includes bottom outlets but no valves fitted.
Location: Perry England Warehouse
Stock #B0044-03 Sold
Used Gardner approximately 2,178 litre working capacity and approximately 2,744 litre total capacity (product dependent) stainless steel ribbon blender. Stainless steel U trough chamber measures approximately 2438mm long x 1067mm wide x 1170mm deep. Unit has stainless steel single shaft with single interupted ribbon driven by a 18.5kw 415 volt 3/50 motor via a David Brown Radicon gearbox with an output speed of approximately 37rpm. Includes bottom outlets but no valves fitted.
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #HG62448 Sold
Used Taurus model PM130-1000 carbon steel ribbonn blender working capacity 2,200 litre. Total capacity approx. 5000 litre. Cylindrical mixing chamber measures approx. 1300 mm diameter x 3200 mm length. Discharging is by tumbling of the whole mixing chamber. Directly driven via Nord gearbox by 11,0kW/50Hz/400V el. motor. Single ribbon mixing shaft rotates 18 rpm. PET food blends batch capacity 1000 kg (based on bulk weight of the blend 300-500 kg/m3). New 2012.
Location: CZ
Stock #H4291-2 Sold
Used Taurus model PM130-1000 carbon steel ribbon blender working capacity 2,200 litre. Total capacity approx. 5000 litre. Cylindrical mixing chamber measures approx. 1300 mm diameter x 3200 mm length. Discharging is by tumbling of the whole mixing chamber. Directly driven via Nord gearbox by 11,0kW/50Hz/400V el. motor. Single ribbon mixing shaft rotates 18 rpm. PET food blends batch capacity 1000 kg (based on bulk weight of the blend 300-500 kg/m3). New 2012.
Location: CZ
Stock #RG9791 Sold
Used 2500 litre stainless steel ribbon blender manufactured by Peha, type TM-2500. Trough measures 1200mm diameter x 1900mm. Inlet diameter 400mm. Manway. Outlet diameter 200mm. Unit is jacketed. Driven by a 18kW motor and mounted on a frame.
Location: EUROPE
Stock #B0002-02 Sold
Used Forberg model FT20 approximately 20 litre working capacity (product dependent) stainless steel twin paddle mixer / dryer. Unit includes top mounted air treatment and filtration unit. Unit is mounted on mobile frame. Includes local control panel.
Location: France
Stock #UG6353 Sold
Used stainless steel contact parts ribbon blender by Zakład Rzemieśniczy Marchewka Ryszard (PL) model MW200. Mixer has working volume 200 l. Top covered with stainless steel lid operated manually. Machine has shaft with welded double ribbon. Shaft is driven by el. motor 3 kW, 1400 rpm, 400 V, 50 hz and gearbox. Working rotation of shaft up to 20 rpm. Mixer has central discharge outlet with dimensions 300 x 300 mm and valve. Machine is mounted on four carbon steel legs with wheels. Last time machine had been working in food production. Technical documentation included.
Location: Poland
Stock #RG1033 Sold
Used Kemutec Gardner approximately 200 litre capacity stainless steel ribbon blender. Unit has stainless steel uninterupted ribbon drive by electric motor and gearbox. Unit includes internal stainless steel spray bar. Unit has clamped hinged top lid. Includes bottom outlet with valve. Unit is mounted on stainless steel mobile frame.
Location: UK
Stock #B0060-01 Sold
Used Stainless steel/mild steel ribbon blender 200 litre-Stainless steel vessel and mild steel ribbon-Use capacity : 200 litre-Vessel Ø 500 x 990 mm-Gear motor : 5.5 kw - Hp 7.5 - Rpm 1500 - 3x 380/660 volts-Speed must be confirmed-Without electric control panel
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VB0007-154 Sold
Used Stainless steel ribbon blender 2000 litre-Ribbon Ø 1100 mm - Length 2470 mm-Central outlet hatch with valve-Tilting stainless steel cover-Motor : 30 kw - Rpm 1500 - 3x 380 volts-With gearbox, transmission pulleys and belts-Without electrical control
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0009-04 Sold
Used stainless steel blade mixer 2500 litres Hp 20-Total capacity: 2500 litres approx.-Used capacity: 2000 litres approx.-Vessel Ø 1250 x 2000 mm - central outlet-Drive : Hp 20 - Rpm 59 - 3x 380 Volts-Speed agitator : must be confirmed-Without electric control panel
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1433-01 Sold
Used Wolfking approximately 2,500 litre total capacity stainless steel twin shaft ribbon blender. Approximately 1,750 litre working capacity based on swept volume of trough. Mixing chamber measures approximately 1,600mm wide x 1,750mm long X 1,000mm deep. Unit has twin mixing screws approximately 800mm diameter X 1,750mm long. Each mixing screw belt driven by 7.5 kw 380-415/660/720 volt 3/50 1445 rpm motor via Brevini gearbox rated 25/1 reduction ratio. End discharge, no lid. Mounted on stainless steel legs. Last used as a continuous mixer for pet food.
Location: United Kingdom
Stock #RG9792 Sold
Used 3,000 litre 1.4306 (304L) stainless steel Ribbon Blender manufactured by Corneloup S.A. Lozanne. Trough measures 3100mm x 1200mm x 1400mm. Unit has a cover. Inlet diameters 400mm, 300mm & 150mm. Manway measures 530mm x 400mm. Outlet diameter 300mm. Unit has an interrupted ribbon. Unit is jacketed. Rated 2,5 bar working pressure. Glands are air purged. Driven by a 7.5 kW, 380/660 Volt (Ex) motor. Mixing shaft speed approximately 10 rpm.
Location: Europe
Stock #RG9790 Sold
Used 3,000 litre stainless steel ribbon blender type manufactured by Werkstatten GmbH Nordhorn. Trough measures approximately 1400mm diameter x 2800mm. Inlet diameter 500mm. Outlet diameter 200mm. With adjustable packing glands. Driven by a 13.5 kW, 380 Volt motor.
Location: Europe
Stock #L1572-02 Sold
Perry is offering a high quality, used Kemutec 316 stainless steel ribbon blender. Kemutec is recognised as a leading manufacturer of mixing equipment. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 3.6 litre Working Capacity and 4.6 Litre Total Capacity Mixing chamber: Approximately 200mm x 150mm x 170mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 0.15 kW Also includes: Local controls, stainless steel hinged lid with clamps, perspex cover and stainless steel mobile frame. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Newton Aycliffe, UK
Stock #L1478-03 Sold
Perry is offering a high quality used Used La Minerva Type C/E MM30 304 stainless steel blender. La Minerva is recognised as a leading manufacturer of mixing equipment. Manufacturer: La Minerva Material: Stainless steel Capacity: Total capacity 30 litres (product dependent) Mixing trough: 400mm long x 305mm wide x 385mm deep Motor: 0.75kw 240volt 50hz motor This unit is ready to run. A video of this mixer is available below. https://youtu.be/igb2uIxZut4 Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Stock #L1398-01 Sold
Used Refurbished Winkworth Model UT300 stainless steel ribbon blender. Approximately 300 litre working capacity (Product Dependent). Mixing trough measures approximately 1150mm long x 575mm wide x 650mm deep. Has stainless steel single interrupted ribbon driven by 4kw, 1430rpm, 3 phase, 50hz electric motor through Custom Power Transmissions gearbox. Has stainless steel hinged lid. Includes off-centre bottom discharge but no valve fitted.
Location: Perry, Newton Aycliffe, UK
Stock #U2397-3 Sold
Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifting/tilt device for work on rectangular containers with volume 200 l and width 655 mm. Lifting device is operated hydraulically. Machine has technical documentation. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #B0018-01 Sold
Used Stainless steel ribbon mixer of 3000 litre-Total volume: 3300 litres-Use capacity: 3000 litres-Ribbon Ø 1000 x 3570 mm-2 outlets-Drive : Hp 15
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1487-01 Sold
Perry is offering a high quality, used Gardner Type M approximately 4,268 litre working capacity and approximately 5,034 litre total capacity (product dependent) stainless steel ribbon blender. Gardner has over 150 years of experience in powder blending and mixing applications. This unit has a stainless steel U trough chamber that measures approximately 3658mm long x 1220mm wide x 1260mm deep. Unit has stainless steel single shaft with single interupted ribbon driven by a 45kw 415 volt 3/50 motor via a Renold gearbox with an output speed of 130rpm and bull gear/pinion set up. Includes bottom outlets but no valves fitted. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Stock #B0060-02 Sold
Used Stainless steel/mild steel ribbon blender 400 litre-Stainless steel vessel and mild steel ribbon-Use capacity : 400 litre-Vessel Ø 600 x 1490 mm-Internal outlet Ø 120 mm-Gear motor : 3 kw - Hp 4 - i = 60 - Rpm 25 - 3x 230/400 volts-Without electric control panel
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0069-01 Sold
Used Mild steel ribbon mixer-Useful capacity : 4000 litre-Ribbons Ø 1150 x 4000 mm-Geared motor : 30 kw - Hp 40 - Rpm 115 - 3x 220/380 volts-Stainless steel cover drived by electric jack-Without electric control panel
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #U2420-2 Sold
Used stainless steel horizontal ribbon blender with total volume 450 l and working volume about 300 l. Mixing chamber has internal dimensions: diameter 730 mm x length of straight side of the wall 1100 mm. Mixer has top feeding connection with diameter 195 mm. On the side wall there is an inspection manway with dims 400 mm x 400 mm and lid. Front wall discharge outlet has dimensions 350 mm x 350 mm and is equipped with pneumatically operated valve. Mixing shaft has double ribbon and is driven by el motor 3 kW, 1415 rpm, 400/690 V, 50 hz, and gearbox. Working rotation of shaft up to 21 rpm. Mixer is mounted on carbon steel supporting frame. Last time used in plastics production. Technical documentation is not included.
Location: Perry Poland Warehouse
Stock #HG62413 Sold
Used SPP (Slovak republic), typ M450-1, stainless steel ribbon blender. Approximately 450 litre total capacity, maximum 200kg per batch, driven by 8kw/17A/ 3/50Hz/IP44 1435rpm., el. motor. Shiping dimensions :1675 high x 1890 lenght x 1095mm wide, 1560 kg.
Location: EU
Stock #L1440 Sold
Perry is offering a high quality, used approximately 5000 litre carbon steel ribbon blender. This unit has an approximately 5000 litre working capacity and 8500 litre total capacity. Mixing trough measures approximately 1600mm wide x 1700mm deep X 3500mm long. Has mild steel single interrupted ribbon belt driven by approximately 15kw motor via David Brown Radicon size 17 gearbox rated 70/1 reduction ratio. Unit is mounted on mild steel frame. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.
Location: Perry England Warehouse
Stock #U2376-3 Sold
Used stainless steel paddle mixer by Steiner Apparatebau Gmbh (DE) model PMD 350, with total volume of mixing chamber 565 l. Working volume about 300 l. Mixing chamber has internal dimensions W 650 mm x L 1250 mm x D 845 mm. Top open. Mixer has single shaft with welded paddles, driven by gearbox and el. motor 3 kW, 1400 rpm, 220-240V/380-415V, 50 hz. Working rotation of shaft 25 rpm. Discharge through front wall outlet equipped with lid designed in pp, operated pneumatically. Machine is mounted on three stainless steel legs, and has local control panel.
Location: Perry Poland Warehouse
Stock #U2430 Sold
Used horizontal stainless steel ribbon mixer with total volume of mixing chamber about 580 l. Working volume up to 400 l. Mixing chamber has internal dimensions: W 700 mm x L 1060 mm x D 860 mm. Machine has single shaft with double welded ribbon. Outside ribbon has bolted teflon wall scrapper. Shaft is driven by gearbox and el motor 4/4 kW, 1420/1720 rpm, 220-240/380-425 V, 50 hz. Working rotation of shaft 24/29 rpm. Top open. Discharge via front wall outlet with dimensions 250 mm x 160 mm, equipped with pneumatically operated lid. Machine is mounted on four stainless steel legs and has local control panel. Last time used in food industry.
Location: Perry Poland Warehouse
Stock #U2360 Sold
Used stainless steel ribbon blender with total volume of mixing chamber 650 l. Working volume 450 l. Mixing chamber has internal dimensions: L 1640 mm x W 600 mm x D 720 mm. Mixer has stainless steel mixing shaft with welded double ribbon. Shaft is driven by el. motor 5.5 kW, 1445 rpm, 380/420 V, 50 hz, through gearbox. Mixer has bottom discharge outlet with dimensions 200 mm x 200 mm, equipped with pneumatically operated slide valve. Top of mixer is equipped with stainless steel cover - length 85 cm - is manually rised and equipped with round feeding inlet/inspection manway - diameter 245 mm. Second section of cover is bolted to mixer and equipped with rectangular inspection manway with dimensions 395 mm x 395 mm - equipped with safety bars and lid. Mixer is mounted on stainless steel supporting frame and is equipped with mild steel work platform. Also included control panel and three tensions cells.
Location: Perry Poland Warehouse
Stock #U2270-4 Sold
Used stainless steel contact part ribbon mixer with total volume 650 l and working volume 450 l. Mixing chamber has internal dimensions: W 700 mm x L 1250 mm x D 830 mm. Mixer has single shaft with welded and bolted double ribbon, driven through two speed electric motor 15/10.5 kW, 1450/725 rpm, 380V, 50 hz and gearbox with reduction rate 14.74. Internal ribbon works in distance 160 mm from shaft. External ribbon works in distance 290 mm from the shaft. Top cover is equipped with feeding inlet with diameter 145 mm and is rised manually. Central bottom discharge outlet with diameter 150 mm. Valve operated manually. Mixer has also provision for mounting two intensive agitators (choppers) but choppers are not included. Mixer has local control panel. Machine is mounted on two carbon steel supports. Shipping dimensions: L 220 cm x W 115 cm x H 250 cm; weight below 1500 kg.
Location: PL
Stock #B0049-05 Sold
Used DINNISSEN stainless steel ribbon mixer 900 litre - type 306 N°150753-Double ribbon Ø 770 mm - length 1970 mm-With 2 tilting cover-Pneumatic outlet Ø 150 mm-Drive : 2 speeds - Hp 5.8/8.8 - Rpm 720/1450 - 3x 380 volts-With gear box and belt transmission-Without frame-Without electrical control panel
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VB0066-01 Sold
Used WAM dust conditioner mixer-Mild steel construction-Type WDF1720 / DUSTFIX20-Motor Control : 7.5kw/ Hp 10 - Rpm 1500 - 220/380 volts-Without electric cabinet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #L1485 Sold
Used approximately 600 litre stainless steel ribbon blender. Mixing chamber approximately 1600mm long x 700mm wide x 700mm deep. Has single interrupted ribbon driven by 7.5kw motor / gearbox. Unit has hinged lid. Has bottom outlet.
Location: Perry, UK
Stock #VB0001-03 Sold
Used 3000 litre Lancelin mild steel ribbon blender type MD3000. Working capacity approximately 2600 litres. Ribbons 1070mm diameter x 2980mm. Outlet 300 x 200 mm. Electric trace heating at the bottom of the tank. Driven by a 15HP 220/380V 48rpm motor. Includes electrical control cabinet.
Location: France
Stock #U2431 Sold
Used stainless steel horizontal powder mixer by Spo-mas Bis FPH (PL) with interrupted ribbon. Total volume of mixing chamber 370 l, working volume about 250 l. Mixing chamber has internal dimensions: W 600 mm x L 990 mm x depth 700 mm. Front wall discharge outlet has dimensions: 300 mm x 150 mm and is equipped with manually operated valve. Mixer is driven by 3 kW el, motor and shaft rotation is adjustable by frequency converter. Top equipped with stainless steel cover. Machine is mounted on 4 legs. Last time used on animal feed. Machine new 2014. Shipping dimensions: L 132 cm x W 75 cm x H 140 cm x weight 280 kg.
Location: Perry Poland Warehouse