100 HP Harsha Engineering Briquetting Press
Stock #ZS61047-3
Used Harsha Engineering briquetting press MDL power 90 complete system with 100HP/660V main motor and 60 feet cooling line with hydraulics cutting knife assembly at the end of line. Briquette diameter 90 mm, length is adjustable. Lots of spare parts. Moisture of raw material up to 12% with particle size 1-2mm. New in 2007, rebuilt in 2011.
Location: Canada
Add to Cart
View Details
13 HP Press Briklis Type Brikstar S100 2X30 Briquetting Press
Stock #HG59687
Used briquetting press Briklis type Brikstar S 100 2X30 (Czech republic). Press has two pressing units, each of 50 kg / H. Material for molding should satisfy the conditions: moisture 8-15%, smaller than 15 mm and a bulk density greater than 70 kg / M3. Go to press sawdust and dust from sawdust, rape and cereal straw, shredded energy plants, stalks of flax and hemp, waste treatment plants seeds, poppy straw, shredded paper, paper dust, textile dust and short fibers or dust-volume Industrial waste from the extraction, polyurethane, certain types of composite plastic materials. Power engine with a power of 10 kW / 3PH / 400V / 50HZ. Dimensions length 1400 mm X 1500 mm width X 2500 mm height, weight approximately 1500 kg. The press was manufactured in 2007.
Location: Central Europe
Add to Cart
View Details
50 HP 6" x 3" Ruff Briquetting Line
Stock #ZS60979
Briquetting line produced under ruff license for processing wood waste (sawdust). Line includes drying line and hydraulic briquetting press.
- dryer has approximate capacity 500 kg/hour with sawdust of 45-50% humidity. Could reportedly reach 600-800 kg/hour for sawdust with lower Moiture content. Drying line will reduce moisture from 50-60% to 10-12%. Includes vibrating screen, conveyor belt, Rotary sorter, feeding auger, Dosing unit, suction for hot air from burner (approx 250 kW), vertical dryer, cyclone, sawdust cooler unit and an auger.
- briquetting press (37 kW / 50 HP) reportedly made in 2011 under ruff licence has approximate capacity of 450 - 500 kg/hour. Feed system with 200 L powder container, classifier.
- briquette dimension - 150 x 75 mm / 6" x 3".
- commissioned in 2012
Location: Europe
Add to Cart
View Details
50 HP Komarek Greaves Briquetter Press
Stock #20526
Used Komarek Greaves 50 HP briquetter press. Segmented pocket design. Spare die pockets are included
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
75 HP Ruff Briquetting Line
Stock #ZS62702 Sold
Little used Ruff briquetting line rated 1 tph or 1000 briquettes per hour for briquette size 9.5" x 2.7" x 3"- 4.3" maximum length.
Line includes:
(2) Ruff model 1100 hydraulic briquetting presses, each with main 75 hp / 575V/3/60 cycles drive motor and hydraulic system, each with additional cooling 3hp and fine filter return, Siemens TP177B control panel, display and PLC Siemens S7-200, Pumps with Gear Motors and thermal Contacts, each press has 5.3 cu.ft feed hopper with 15"x32" openings, agitator with 1hp motor to prevent arching, feed screw with 2hp motor and vertical pre-charger with hudraulic drive. Also the system included transfer table top conveyor, Sigma-Overlap Model - 5W5.0 Automatic Packing Sealer With Automatic Stacker and Automatic Overwrapping Sealer LF-H (18 "W x 6" H), Automatic Entry System for Fully Closed Sealing, Pneumatic Sealing Head covered with Teflon, Easy film loading system, motorized from the top, vacuum tunnel model Delta DXT 1.5E (20" X 52" X 9") and take away Conveyors.
Space needed : 6.5' x 6.5' x 7' (Space include for operation and maintenance). Each Machine weight without options approx.: 13,870 Lbs. Hours of usage about 216 hours for each briquetting press.
Location: QC
View Details