Plant - Agricultural Chemicals(1)
Plant - Air Separation, Oxygen, Nitrogen, Hydrogen(18)
Plant - Biorefining(8)
Plant - Brewery, Distillery, Alcohol(20)
Plant - Dairy Milk Ice Cream(3)
Plant - Edible Oil(13)
Plant - Foods(43)
Plant - Industrial Inorganic Chemicals(5)
Plant - Industrial Organic Chemicals(4)
Plant - Mineral Processing, Mining, Cement(12)
Plant - Miscellaneous(27)
Plant - Petrochemical, Refinery & Asphalt(5)
Plant - Pharmaceutical(1)
Plant - Plastic Materials, Synthetic Resins and Rubber, Manmade Fibers(5)
Plant - Plastic Rubber(2)
Banbury Type Mixers(9)
Continuous Mixers(11)
Dispersion Mixers Europe(59)
Double Arm Mixers(36)
High Intensity Mixers(58)
Intensive Pharma Mixers(23)
Miscellaneous Powder Mixers(8)
Mixer Miscellaneous(23)
Mixer Universal(27)
Nauta Mixers(53)
Planetary Mixers(82)
Plowshare Mixers(49)
Ribbon Mixers(43)
Ribbon Mixers Europe(47)
Tumbling Mixers (81)
Atmospheric Tray Dryers(7)
Batch Fluid Bed Dryers(43)
Conical Rotary Vacuum Dryers(20)
Continuous Fluid Bed Dryers(12)
Conveyor Dryer(4)
Conveyor Dryer ( Sandvik Type )(2)
Double Drum Dryers(1)
Flash Dryer (3)
Other Dryers(1)
Pan Dryers(10)
Rotadisc Dryer(3)
Rotary Hot Air Dryers(11)
Rotary Kiln Dryer(2)
Rotary Multi-Pass Dryers (Heil Type)(1)
Rotary Steam Tube Dryer (4)
Rotary Tray Dryers(3)
Cartridge Filters(56)
Filter Parts(1)
Nutsche Filters(17)
Osmosis and Membrane Filters(15)
Plate & Frame Filter Presses(46)
Plate & Frame Filter Presses Europe(28)
Pressure Leaf Filters (1-199 SQFT)(20)
Pressure Leaf Filters (200 - SQFT & Up)(9)
Pressure Leaf Filters, Europe(16)
Rotary Vacuum Filters - Drum(5)
Rotary Vacuum Filters - Drum, Europe(7)
Rotary Vacuum Flters, Disc(1)
Vacuum Belt Filters(6)
Bins and IBCs(169)
Glass Lined Tanks(55)
Glass Lined Tanks, Europe(14)
Pipe Glass(2)
Stainless Steel Tanks in Europe 10,000-19,999 Litres(36)
Stainless Steel Tanks in Europe 5,000-9,999 Litres(49)
Stainless Steel Tanks in Europe Less than 5,000 Litres(359)
Stainless Steel Tanks in Europe Over 20,000 Litres(31)
Stainless Steel Tanks Less than 1,000 Gallons(148)
Stainless Steel Tanks, 10,000 to 19,999 Gallons(18)
Stainless Steel Tanks, 1000 to 1999 Gallons(36)
Stainless Steel Tanks, 20,000 Gallons and Up(1)
Stainless Steel Tanks, 2000 to 3999 Gallons(39)
Stainless Steel Tanks, 4000 to 5999 Gallons(21)
Stainless Steel Tanks, 6000 to 9999 Gallons(15)
Steel Tanks in Europe(3)
Steel Tanks Less than 10,000 Gallons(10)
Steel Tanks, 10,000 Gal. & Up(2)
Carbon Steel Reactors(1)
Glass Lined Agitators(198)
Glass Lined Baffles(179)
Glass Lined Covers(179)
Glass Lined Drives(94)
Glass Lined Reactor Parts(38)
Glass Lined Reactors(74)
Glass Lined Reactors Europe 5,000 Litres and Up(11)
Glass Lined Reactors, Europe Less than 5,000 Litres(33)
Reactor Parts - Agitator Drives(105)
Reactor Parts - Agitators(5)
Stainless Steel Reactors - Europe 5,000-19,999 Litres(14)
Stainless Steel Reactors - Europe Less than 5000 Litres(66)
Stainless Steel Reactors - Europe More than 20000 Litres(3)
Stainless Steel Reactors 2000 Gallons and Up(5)
Stainless Steel Reactors 500 to 2000 Gallons(13)
Stainless Steel Reactors Less than 500 Gallons(72)
Rectangular Screens(38)
Rotary Screens(24)
Round Screens(37)
Round Screens - Europe(7)
Screen Dewatering(1)
1 1/2" Extruders(6)
10" Extruders(1)
2 1/2" Extruders(7)
3 1/2" Extruders(3)
4 1/2" Extruders(1)
6" Extruders(1)
8" Extruders(1)
Co-Rotating Twin Screw Extruders(14)
Counter-Rotating Twin Screw Extruders(9)
Extruder Screws(11)
Extruder Temperature Panels(10)
Extrusion Line Feeders(11)
Pug Mills - Vacuum Extruder(1)
Rubber Extruders(3)
Cutter Film Densifier(4)
Cutter Guillotine(2)
Cutters/Shredders(15)
Granulator Parts(12)
Pelletizer Parts(1)
Strand Pelletizers(19)
Underwater Pelletizers(9)
Butter or Margarine Machinery(7)
Cooker - Cooler/Bottle Conveyor Type(1)
Cooker, Rendering Type(3)
Fishmeal(5)
Food Extruders(10)
Hollow Screw Cooker Or Cooler(10)
Meat Equipment(8)
Miscellaneous Equipment for Food Processing(34)
Oils and Fats Processing Equipment(22)
Pasteurizers(4)
Rendering Equipment(12)
Vegetable Cutters(3)
Harvestor(1)
Sugar and Pulp Dryers(4)
Sugar Beet Diffuser(3)
Sugar Beet Factory(3)
Sugar Beet Preparation(7)
Sugar Beet Slicer(5)
Sugar Cane Factory(9)
Sugar Cane Preparation(24)
Sugar Centrifuges(21)
Sugar Equipment, Miscellaneous(16)
Sugar Evaporator, Pan, Crystallizer(20)
Sugar Filters(7)
Sugar Pulp Dewatering Press (16)
Bottle Cleaner(2)
Checkweighers(13)
Cottoner(3)
Feeder, Miscellaneous(32)
Feeder, Vibrating Pan(8)
Filler Form Fill & Seal(24)
Filler Form Fill & Seal Liquids(10)
Filler Liquid Gravity(3)
Filler Liquid High Speed(3)
Filler Liquid Pressure Low Speed(7)
Filler Paste - Piston - Pocket(21)
Filler Powder Bag & Box(22)
Filler Powder Capsule - Ampule(9)
Filler Tablet & Counter(5)
Filler Tube(6)
Your Cart is Empty.
Home » Reactors » Reactor Parts - Agitator Drives
Stock #18422-1
UNUSED HAMILTON STAINLESS STEEL DOUBLE MOTION SCRAPER AGITATOR FOR KETTLE 44" DIA. X 30" DEEP. WITH 3 HP EURO DRIVE.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #V871-14
New Lightnin SPX model X5Q-50 agitator Bolted vertical mounting .50 HP, 575/3/60/18000 rpm TEFC motor 350 rpm, 5:1 ratio reducer 1.25" diameter shaft 3 blades included
Location: CANADA
Stock #V871-13
New Lightnin SPX model X5Q-50 agitator Bolted vertical mounting .50 HP, 575/3/60/18000 rpm TEFC motor 350 rpm, 5:1 ratio reducer 1.25" diameter shaft 3 blades included
Location: CANADA
Stock #V871-12
New Lightnin SPX model X5Q-50 agitator Bolted vertical mounting .50 HP, 575/3/60/18000 rpm TEFC motor 350 rpm, 5:1 ratio reducer 1.25" diameter shaft 3 blades included
Location: CANADA
Stock #15999-990
Used Chemineer model 3HJNS-10 agitator drive with 2-3/4" diamater X 99-1/2" long shaft.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #15999-989
Used Lightnin 20 HP right angle agitator drive with 3" diameter X 133" long shaft.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #7810-3
Used Lightnin Duramix .30 HP clamp on agitator drive. 3/60/115-330 volt motor. 1725/1425 rpm.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #064-08
Used Lightnin Inline 316 electric stainless steel mixer, model 1LBC50. 1/2 HP 3 phase 60 cycle 480/1725 volt rpm TEFC. With stuffing box. 2" D. Impeller. 50 psi line pressure.
Location: Midwest USA
Stock #4648-1SA
Used 10" diameter propeller agitator with a 1/2 HP Cleveland clamp-on drive.
Location: NJ
Stock #M3120-052
Used Lightnin model ND-2-AVM 3/4 HP portable clamp-on agitator drive. 3/4 HP, 200 volt, 1725 rpm motor. No prop or shaft.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #3978-4
Used Lightnin model ND-2ASCR clamp on agitator drive. 3/4 HP, 1725 rpm. 90 arm volts (DC). Serial #81/960765.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #7985V
Used Lightnin Vaktor .75 HP vertical mount agitator. 3/60/203-230-450 volt, 1725 rpm motor. 1" diameter X 8' long stainless steel shaft with 12" propeller.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #15999-203
Used Lightnin 3/4 HP clamp on agitator. Electrics are 3/60-50/208- 220-440V. Serial #517544.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #3639-39
Used Lightnin clamp on agitator drive, 3/4 HP 3/60/220. Less shaft and prop.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #U2347-11
Used vertical propeller agitator by Stober (DE) with contact parts designed in stainless steel. Agitator has three blades propeller with diameter 180 mm. Working length of shaft is 770 mm. Agitator is driven through el. motor 0.75 kW, 1405 rpm, 220/380V, 50 hz, via varispeed gearbox with manual adjustment of rotation. Working rotation range from 149 up to 1040 rpm. Motor is Ex design (Exete). Agitator is bolted to stainless steel column with total lenght 197 cm. Bottom part of column is round on the lenght 12 cm, what makes possible to arange agitator as rotating mixer. Height of agitator is adjustable manualy in range 100 cm.
Location: Perry Poland Warehouse
Stock #448-15
Used Lightnin Model 14S1 vertical mount agitator. 1 HP giving 84 rpm output speed. Built 1998. Serial #W9841223500501. 8" flange mounted. Series 10. Newer design.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #419-53
Used Lightnin agitator drive Series 10, equipped with 1 HP motor and gearbox, flange mounted, has 8' long stainless steel shaft with (1) 3-paddle stainless steel blade.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #419-52
Used Lightnin agitator drive Series 10, equipped with 1 HP motor and gearbox, flange mounted, has 8' long stainless steel shaft with (1) 3-paddle stainless steel blade.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #785-46950
Used 1 HP model G-15 agitator drive.
Location: Midwest USA
Stock #276-105SA
Used 1 HP Philadelphia agitator drive with gate type agitator. 3/60/220-440 volt. 16.5:1 ratio, 1740 rpm in, 106 out.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #276-104SA
Used 1 HP Philadelphia agitator drive with gate type agitator. 3/60/220-440 volt. 16.5:1 ratio, 1740 rpm in, 106 rpm out.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #448-28
Used Lightnin vertical flange mounted agitator 1 HP model SJS-174. Shaft 1-1/2" diameter X 18" long. 3-blade propeller.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21432-10
Used 1.17 HP Lightnin Agitator with blades 1725 RPM 208-230/460 volt Stainless steel blades
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #15999-313
Reconditioned Philadelphia Model PTE-08 agitator drive. Flange mounted design. 17.5:1 ratio, 1750 input rpm, 118 output rpm. Service factor 1.25. HP rating 18.56. Serial #303647. Cleaned and painted.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #336-101AG
Used 2-tier 4-blade pitched impellor agitator. 16" span. Approx. 6' long shaft. T316 stainless steel construction. Driven by Chemineer model 1HTM-15, 1.5 HP drive. Rated 100 rpm output.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #4684-1SA
Used Cleveland Manufacturing Company clamp on agitator and drive. 10" diameter 3-blade propellor agitator, 64" long shaft, stainless steel. 1.5 HP 230-460 volt gearhead drive.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #U2294-15
Used vertical agitator with contact parts designed in stainless steel. Agitator has mixing cage consit of two discs with diameter 240 mm. Inside this cage there is mounted a paddle with width 140 mm. Paddle is directly driven by el. motor 1.5 kW, 1420 rpm, 380 V, 50 hz. Working length of shaft 590 mm.
Location: Perry Poland Warehouse
Stock #5548-10
Used Lightnin model XJ10-174SCR agitator drive, with 1.74 HP DC motor. With 3-blade 14" span pitched impellor agitator, on 1 1/2" DIA. X 26" long shaft, stainless steel. Flange mounted on 40" long 24" wide angle iron bridge mount. Lightnin serial #88 358012.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #M2325-002
Used Lightnin agitator drive. Model 524TEC102 10 HP Allis Chalmers motor 3/60/220-440 volt. 1740 rpm. Output rpm 56, reducer ratio 31.4-1. 3" stub shaft. 20" mounting flange. S/N 559013.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #U2292-4
Used stainless steel contact parts paddle agitator. Shaft has diameter 80 mm x total lenght 219 cm from stainless steel mounting flange. Working length of shaft is 200 cm and shaft is bolted on 6 bolts. Agitator has three paddles bolted to the shaft. Diameter of paddles 95 cm. Agitator is belt driven by el motor 11 kW, 1450 rpm, 220/380 V, 50 hz, in ex design EE x d II BT4. Manual adjustment of working rotation of agitator via speed variator. Mounting flange has diameter 510 mm with 16 holes, each with diameter 20 mm. Holes are located at 470 mm distance from the centre of flange. There is also mechanical sealing of the shaft on the flange.
Location: PL
Stock #15999-230
Used Chemineer right angle agitator drive. Model 9HTN-150. Rated 120 rpm output, 1750 rpm input. 12" DIA. Hub.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #L1194-34
Used 2-tier 4-blade pitched paddle and sawtooth type agitator driven by a 1.5 kW, 220-415 volt, 1420 rpm motor.
Location: Perry England Warehouse
Stock #L1150-01
Unused Chemineer model 1-HSNS-3 agitator drive. Direct driven by 2.2 kW 3/50 1430 rpm motor through a gearbox.
Location: Perry England Warehouse
Stock #111-1016AG
Used Philadelphia right angle agitator drive. 113 rpm output with 15 HP motor 3 phase 60 cycle 440 volt. No shaft or blade.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #3581-2AG
Used Chemineer right angle 2 speed drive. Model MAB-150-886 driven by 15 HP motor 3/60/440/1800/900 rpm. Output speed 20 and 10 rpm. Stuffing box. Agitator consists of 4 1/2" DIA. X 84" high stainless steel shaft and helical blades. Type 304 stainless steel contacts. Designed for 1500 gallon stainless steel vessel 78" DIA. X 98" inside heads.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #315-209
Used bridge mounted 15 HP agitator drive. Foote Brothers vertical inline reducer, belt driven by 15 HP 3/60/460 volt motor, shaft mounting flange for a 4" DIA. Shaft. Steel angle iron bridge mount, 2' wide X 7' long.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #315-202
Used bridge mounted 15 HP agitator drive. Foote Brothers vertical in-line reducer, belt driven by 15 HP 3/60/460 volt motor, shaft mounting flange for a 4" DIA. Shaft. Steel angle iron bridge mount, 2' wide X 7' long.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #325-12DR
Used 15 HP Lightnin drive. Model 73S15, S/N 77180SS, 16.8:1 ratio, 126 out rpm. Motor 15 HP 3/60/230-460V exp.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #325-11DR
Used 15 HP 73S10 Lightnin agitator drive.Last used on a 1,500 gallon reactor.. Model 73S15, S/N 77180SS, 16.8:1 gear ratio 126 rpm output speed. 3/60/230-460 volt.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #574-31
Used 150 HP Lightnin model 88-C-150 agitator drive. 155/77 rpm, 11:5 gearbox ratio, 460 volt. Stainless steel stub shaft.
Location: Midwest USA
Stock #014-02
Used Foote Bros IXL type 10-HGV agitator drive, ratio 7.5:1 horizontal input shaft, right angle down drive output shaft. Rated 16 HP @ 210 rpm in - 28 out. 34 HP @ 450 rpm in - 60 out. 65 HP @ 900 rpm in - 120 out.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #M3441-013
Used Lightnin model 200-LD-200-200 vertical flange mounted agitator. 2 HP 3/60/220/440 volt 1160 rpm motor. Requires prop and shaft.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #M3677-003
Used Lightnin flanged mounted agitator, 12" flange, 2 HP 3/60/220/440 volt 1750 rpm Allis Chalmers motor. 12" stainless steel shaft with 6" stainless steel flange.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #M3441-012
Used Lightnin model 33G vertical flange mounted agitator. 2 HP 220/440 volt 1750 rpm motor. Requires prop and shaft.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #M3534-066
Used 2 HP Allis Chalmers 220/440 Volt 1155 rpm agitator drive.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21432-09
Used 2 HP Lightnin Agitator With Stainless Steel Shaft and Blades 1160 RPM 230/460 volt
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #352-50AG
Used Lightnin model XLC agitator drive, 2HP, 208/220/440 volt, stainless steel shaft, SN 92/B00346
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #346-62
Used 21.2 HP Philadelphia mixer drive, type PTER0-12. 47.3:1 ratio. 1750/1150 input rpm, 37/25 output rpm. 1.25 service factor. S/N 301602.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #8912-07
Used Philadelphia PTE08 drive. 21.44 output rpm. No motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #SB085-14AG
Used Chemineer agitator model 8RHTA-250 right angle down. Has 250 HP 3/60/2300V/1785 rpm motor. Output 350 rpm impeller. Mechanical seal. Was mounted on 1000 gallon vertical 304 stainless steel reactor.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #276-068SA
Used 3 HP Philadelphia Gear Works vertical agitator drive. 16.5:1 gear ratio, 106 output rpm. 3 HP 1750 rpm 220/440 volt motor. Bridge mounted on 2' wide X 9' long steel frame. Philadelphia serial #333V2.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #5119-30
Used Philadelphia Mixer Company Model MT-02-PTS right angle agitator drive. Rated 1750 rpm input, 14.0:1 gear ratio, 125 rpm output. 3 HP 1730 rpm 230/460 volt motor. Mfr. Serial #89BB00678.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #276-580
Used Philadelphia 3 HP agitator drive. Vertical design. Flange mounted.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #U806V-16
Used stainless steel contact parts vertical disc type agitator. Shaft has working length 790 mm and is equipped with disc mixing head, with diameter 250 mm. Total length of shaft 1100 mm. Agitator is driven directly by el motor 3 kW, 720 rpm, 380 V, 50 hz.
Location: PL
Stock #U806V-17
Used stainless steel contact parts vertical disc type agitator. Shaft has working length 790 mm and is equipped with disc mixing head, with diameter 250 mm. Total length of shaft 1100 mm. Agitator is driven directly by el motor 3 kW, 720 rpm, 380 V, 50 hz.
Location: PL
Stock #469V-034-087DR
Used 5 DTW drive with motor, 15:1 ratio and 1.5:1 ratio.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #271-505
Used Philadelphia PTE-06 agitator drive. Rated 8.48 HP, 1.25 service factor, 1750 input rpm, 14.9:1 gear ratio, 100 rpm output. Serial #308360. Driven by a 5 HP 3/60/230-460 volt motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #5093-8DR
Used Falk vertical agitator drive class 2, 30 output rpm. With 5 HP, 3 phase, 60 cycle, 220-440 volt, 1150 rpm. TEFC motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #276-102SA
Gate type agitator with 5 HP, 440 volt, right angle, bridge mounted drive.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #082-24033A
Used Lightnin 5 HP Clamp-on type agitator.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #109-200AG
Used 7 1/2 HP vertical agitator drive. Falk model 7.535EZ05a5, 11.53:1 reduction ratio, rated 100 rpm output. Direct coupled 7 1/2 HP, 3 phase, 60 cycle, 230-460 volt, 1150 rpm motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #663-REX8303AGIT
Stock #663-REX8303AGIT
Used 7.5 hp Chemineer drive with 3-blade retreat curve agitator and beaver tail baffle. (2) dip tubes. 12/125 rpm. Mechanical seal. Last used on 500 gallon glass lined Tycon.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #5119-21AD
Used Philadelphia Mixer Company Model MT-02-PTS right angle agitator drive. Rated 1750 rpm input, 17.0:1 gear ratio, 100 rpm output. 7.5 HP 1755 rpm 3/60/230-460V motor. S/N 89BBH0674.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #346-64
Used 7.5 HP Philadelphia mixer drive. Type PTER0-10, 17.5:1 ratio. 1750/1150 input rpm, 100/65 output rpm. 1.25 service factor. 575 volt, S/N 303195.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #276-080SA
Used Lightnin model 327-Relb-7.52 reducer, 7.5 HP induction motor, 3/60/220-440 volt, 1760 rpm, motor S/N 2435714. Lightnin reducer 45 rpm, 38:4 ratio, S/N 6512385. No agitator shaft or blades.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #SA15365-13
Used Mixco model 218Relb agitator drive, 100 rpm, 7 1/2 HP motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #308-48DR
Used U.S. Varispeed 7.5 HP drive, bridge mounted.
Location: NJ
Stock #308-47DR
Used U.S. Varispeed 7.5 HP drive, bridge mounted.
Location: NJ
Stock #070-128AG
Used Lightnin model 515-REDS-75.1 right angle agitator drive. Serial# 627520. Ratio 14.01, class 1 driven by 75 HP motor 1775 rpm 3/60/ 220/440, frame: 504U. 126 rpm output. No seal assembly.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #5760-22
Used Lightnin Company Model LAT-150 agitator drive. 58.8:1 right angle reducer with 3/4 HP oil pump, rated 30 rpm output. Direct coupled 75 HP/35 HP 1780/1185 rpm 460 volt motor. 24" high I-beam supports. Carbon steel agitator mounting shaft W/12 1/4" outer diameter flange. Serial #8196733701.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #278-60
Used 75 HP Lightnin agitator drive, model lat-150. 30/20 rpm output. 60.8:1 gear ratio. Designed for atmospheric conditions. With steel I-beams supports for bridge mount. Serial #7605890.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #L1150-03
Unused Chemineer model 1-GTNC-1 agitator drive. Direct driven by 0.75 kW 3/50 920 rpm motor through a gearbox. Agitator shaft approximately 55mm diameter X 250mm long.
Location: Perry England Warehouse
Stock #L1150-11
Unused Chemineer agitator drive. Direct driven by 0.75 kW 3/50 920 rpm motor through a gearbox. Agitator shaft approximately 55mm diameter X 250mm long.
Location: Perry England Warehouse
Stock #682-76
Used Brawn model BDA1000C fixed mount, open tank design, air-operated agitator. Clockwise rotation. Stainless steel stub shaft mounting flange. Requires shaft and blade.
Location: Midwest USA
Stock #682-77
Used Brawn model BDA1000C fixed mount, open tank design, air-operated agitator. Clockwise rotation. Stainless steel stub shaft mounting flange. Requires shaft and blade.
Location: Midwest USA
Stock #B0161-08
Used Agitator head with stainless steel frame-Driven by SEW variable speed motor Hp 15 - Rpm 1400/406 à 1645 - 220/380 volts-Fixation by flange Ø 250 mm, 4 holes Ø 15 mm, center axes 215 mm-Mecanical seal-Without agitation-Dimensions : 500 x 400 mm x H. 1200 mm under flange
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0117-02
Used HEIDOLPH stainless steel laboratory agitator-Type RZR1-Agitation : 2 pales-Rpm 280 to 2200 - 230 volts single phase - Hp 0.1
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0161-09
Used RAYNERI agitator head-Type SB 18 n° 70867-Without shaft and turbine-ATAV HP motor Hp 0.5 - Rpm 1430 - 230/400 volts-On frame-Without electrical cabinet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0103-03
Used SEW geared motor-Type R37DT71D4-Hp 0.5 - Rpm 35 - 3x 230/400 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0103-04
Used SEW geared motor-Type R37DT71D4-Hp 0.5 - Rpm 23 - 3x 230/400 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0101-02
Used LEROY SOMER geared motor-Type CB 2102 B8-Hp 0.75 - Rpm 2000/63 - 180 volts continous power - 3.7 A
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0101-01
Used LEROY SOMER geared motor-Type CB 2102 S 38-Hp 0.75 - Rpm 2000/55 - 180 volts continuous power 3.7 A
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VB0015-14
Used Geared motor for MIXEL mixer - Hp 1-Hollow Shaft-Gear motor 0.75 kw / Hp 1 - Rpm 1400 - 230/400 volts-Exit speed to be confirmed-Delivered without shaft or propeller
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0161-16
Used Stirring with stainless steel shaft, height 750 mm-Turbine : homogenizer-Without motor-With grab handle-Without electrical cabinet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VB0007-175
Used GRENIER CHARVET wall-mounted agitator-Type RMV75 / N° 10898-Disc Ø 250 mm-Agitator : height 1000 mm-Manually raise and lower-To attach to the wall-Motor : 7.5 kw – Hp 10 – Rpm 1450 + various speed – 3x 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0161-11
Used SILVERSON stainless steel agitator-Type DX-Turbine DIA 98 mm with 4 blades, shaft DIA 16 mm, Height 600 mm-On inclined flange + handle-Control: BROOK Hp 2 motor, Rpm 2850, 380 volts-Without electrical cabinet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0161-10
Used DMR stainless steel agitator-Type VDB SPECIAL-Shaft DIA 20 mm, Height 1560 mm-Turbine 3 blades DIA 100 mm under 2 cups-Control : LS Hp 3 motor, Rpm 1425, 220/380 volts-Without electrical cabinet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0161-12
Used Stirring head, with hollow shaft Ø 50 mm-Control : “LEROY SOMER” motor Hp 3, Rpm 1430, 220/380 volts-Transmission by pulleys and V-belts, plus “POULIBLOC” speed reducer-Rotation speed : Rpm 35-Under casing, without electrical control cabinet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0161-13
Used Stirring head, with hollow shaft Ø 50 mm-Control : “LEROY SOMER” Hp 4 motor, Rpm 1440, 220/380 volts-Transmission by pulleys and trapezoidal belts, plus “POULIBLOC” speed reducer-Rotation speed : Rpm 42-Under casing, without electrical control cabinet
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0122-02
Used SEW gear motor-Type R80D-4 kw - Hp 5.5 - Rpm 100 - 3x 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #6027V-1
Used Lightnin model DAT-160 agitator drive. 9.22:1 gear ratio. Serial #7900485.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #271-025SA
Used Lightnin model 33 G 50 agitator. (2) 10" diameter propellers on 1 1/4" diameter X 68" long stainless steel shaft. Flange mounted for 10" I.D. connection, with seal. With motor. Lightnin serial #541089.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #352-300
Used Lightnin model NAG33 clamp-on pneumatically driven agitator drive. S/N 81/801264.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #271-502
Used Pfaudler 2.5 TW drive. 20:1 ratio.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #5212-10SA
Used Pfaudler gate and turbine double-motion agitator. Built 1974 (off vessel #E374-0363).
Location: NJ
Stock #VB0007-142
Used Stainless steel emulsifier stirrer-Shaft width : 500 mm - Tools : Ø 65 mm-Variable speed from Rpm 260 to 1820-0.45 kw - Rpm 2830 - 3x 210/380 volts-Overall length : 1150 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0132-03
Used IKA laboratory emulsifier stirrer-Type T50B stainless steel-1x 230 volts -speed 1100 watts Rpm 4000 to 10000-Shaft height : 305 mm-Ø tool : 65 mm-Ø turbine 4 blades : 50 mm
Location: NEUVILLE EN FERRAIN -FRANCE
Stock #B0131-02
Used SILVERSON stainless steel agitator-Type GX10/1500-7.5 kw - Hp 10 - Rpm 1500 - 380/660 volts-Stainless steel homogenizer-Shaft length under flange : 1230 mm-3 blade propeller-Working head : external Ø : 160 mm - internal Ø : 145 mm with turbine
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #21544-02
Used Stainless Steel Agitator Shaft
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21544-01
Used Stainless Steel Agitator Shaft
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #B0161-14
Used Stirring only, stainless steel shaft dia 30 mm, height 1200 mm-With turbine dia 135 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #B0161-15
Used Stirring only, stainless steel shaft, dia 60 mm, height 1600 mm-Turbine 6 blades dia 320 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #875-113441 Sold
Used Lightnin Model 15S5 agitator. Model 15S5 Complete with stainless steel shaft and blades 15 HP
Location: South USA
Stock #875-113443 Sold
Used Lightnin (SPX) model 75P20 agitator. Model 75P20 20 HP, 32.07:1 ratio
Location: South USA
Stock #875-113442 Sold
Used Lightnin (SPX) model 75P20 agitator. Model 75P20 20 HP, 32.07:1 ratio, 1800 rpm (2) Sets of A312 (3) blade impellers Requires mechanical seal Material: Duplex 2507
Location: South USA
Stock #VB0015-03 Sold
Used Stainless steel shaft Ø 59 mm X L 600 mm-Agitator 3 blades Ø 450 mm-Geared motor : 1.2 / 2.4 Kw - Hp 1.6 / 3.2 - Rpm 171/256 - 400 Volts
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VB0015-08 Sold
Used NORD REDUCTEUR Hollow shaft gear motor-Type SK6382AZ-5.5 kw / Hp 7.5 - Rpm 1500 - 380/660 volts-Output speed : Rpm 13
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #VB0007-128 Sold
Used Stainless steel IKA laboratory agitator type RW16B-With stainless steel double jacket vessel Ø 135 x 155 mm or 2 litre-Vessel with cover-3 stainless steel tools-Drive : 75 watts - Rpm 40 to 1200 - 3x 230 volts-Height adjustable
Location: NEUVILLE EN FERRAIN - FRANCE
Stock #15999-976 Sold
Used Philadelphia PTE 10 agitator drive, equipped with 30 HP motor.
Location: On Site at Perry (Hainesport, NJ - USA)