Home » Filters » Osmosis and Membrane Filters
Osmosis and Membrane Filters
GE Osmonics RO System
Stock #9914
Used GE Osmonics reverse osmosis system estimated 15 gallons per minute. Skid mounted. 110 psig with a permeate pressure of 75 psig. 5-Micron pre-filter and housing. 50.80 cm (20 inch).
Location: On Site at Perry (Hainesport, NJ - USA)
GEA Niro Reverse Osmosis Filtration System
Stock #ZG63649
Used/Rebuilt GEA Niro Reverse Osmosis Filtration System 316 stainless steel contacts. Feed Flow rate: 62.50gpm Permeate flow rate: 56.25gpm Concentrate flow rate: 6.25gpm Includes: Feed balance tank Prefilter 25 HP Fristam feed pump Sunflo P2 100 HP high pressure feed pump (44) 4-element membrane housings with model 8040 thin-film composite membranes and 13,400 square feet of filtration area (4) Fristam 25 HP recirculation pumps for constant cross-flow conditions Also includes concentrate section, a permeate section with balance tank and a Fristam 7.5 HP transfer pump, and a complete CIP system with all controls, instrumentation, new inverters, piping, and valving Originally designed in 2002 for concentrating tomato juice. Transferred in 2007 for dried fruit juices and concentrates. Rebuilt, installed, and never redeployed. Still installed. Details and documentation available.
Location: West Coast USA
Millipore PRO-8/4 XP Process Reverse Osmosis System
Stock #ZG56755
Used Millipore PRO-8/4 XP process reverse osmosis system. (2) 316 stainless steel ASME code stamped housings. Each housing can hold (2) 300 square foot Nanomax cartridges representing 600 square feet total membrane area. 12000 square foot total membrane area. Control system utilities hardware and software T perform automated processing and date management. Specific control functions and interlocks are performed by PLC Allen Bradley SLC-5/04 controls. Rockwell RSLOGIX 500 software. Includes Goulds 3335 100 HP centrifugal pump, 25 square foot shell and tube heat exchanger, and BEBCO purging unit. Stainless steel piping and valves installed with sanitary Tri-Clover clamps. Mounted on stainless steel frame. Built 2000.
Location: South USA
Nalco Reverse Osmosis System with Capacity 4000 Litres/Hour
Stock #RG9641
Used 4000 litres/hour reverse osmosis system installed by Nalco in 2010. Equipment is housed in a GRP constructed kiosk with a steel platform base and includes: - (1) 4000 litre mains water break tank. - (2) pressure controlled duplex booster set with control panel. - (1) duplex carbon filter. - (1) Fleck duplex 2910 softener. - (1) 21,000 litre grp salt saturator tank. - (1) brine tank. - (1) Herco reverse osmosis package model UO 4000 KR. - (1) 4,000 litre ro water break tank. The fully automated system currently take in towns water and softens it. The softened water is then supplied to the reverse osmosis unit which then supplies permeate on demand.
Location: Europe
Nanofiltration Skid
Stock #698V-02
Used Nanofiltration Skid With Flow Rate of 17.9 Gallons Per Minute Maximum Gallons Per Minute: 23.2 Skid Consists of the Following: Skid 1: - NF pressure vessels (2 off) - NF membranes (3 per vessel) - pump - 5 Micron cartridge filter - sodium bisulfite Dosing tank and pump - NF panel Skid 2: Also contains (1) Osmotron (RO/EDI) skid consisting of: - RO pressure vessels (3 off) - RO membranes (2 per vessel) - RO pump - electric heater - sodium hydroxide Dosing tank and pump - sodium bisulfite Dosing tank and pump - E-cell EDI unit (2 off) - EDI pump - main control panel
Location: On Site at Perry (Hainesport, NJ - USA)
Pall Water 4,000 sqmt Microfiltration Membrane System
Stock #RG1023
Reportedly little used Pall Water (Formally Pall Corporation) microfiltration membrane filtration system built and designed to UK water utility specification for potable water production in emergency situation. System comprises 2 no. 40ft containers. Fully automated stand-alone system uses Mitsubishi PLC/HMI and Siemens drives and include all backwash and clean in place / effluent neutralisation facilities with integrated monitoring of membrane integrity. There are 80 no. DWI regulation 31 approved Asahi Microza UNA-620C PVDF microfiltration membrane modules at 50sqmt per module giving a total system filtration area of 4000sqmt. The membrane pore size is approximately 0.1μm. System was designed to produce 8000 m3/d from upland reservoir water source. Without major modification this system could also be deployed for the recycling of municipal effluent ex biological treatment or for the recycling of any moderately turbid effluent with low biodegradability to provide cooling water for industry or feed water for reverse osmosis process.
Location: UK
Pronto Model 17-Q-4 Tubular Check Filter
Stock #15361-25
Used Pronto model 17-Q-4 16.8 square foot stainless steel tubular check filter. 4 tubes. 8-5/8" diameter X 98" overall length. 15 psig steam @ 212°F. 150 psig Syrum @ 200°F.
Location: On Site at Perry (Hainesport, NJ - USA)
Refurbished 17.9 Gallon/Min Nanofiltration Skid System
Stock #21661V
Used 17.9 Gallon/Min Nanofiltration Skid System Skid consists of the following: - NF pressure vessels (2 off) - NF membranes (3 per vessel) - pump - 5 Micron cartridge filter - sodium bisulfite Dosing tank and pump - NF panel - 23.2 gallons/min maximum flow rate Also contains (1) Osmotron (RO/EDI) skid consisting of: - RO pressure vessels (3 off) - RO membranes (2 per vessel) - RO pump - electric heater - sodium hydroxide Dosing tank and pump - sodium bisulfite Dosing tank and pump - E-cell EDI unit (2 off) - EDI pump - main control panel Refurbished system includes the following: - New HMI interface with trending, alarming, DCS interfacing - New UL rated panel including a fused disconnect with a door mounted handle, drive power safety contactor, UL489 circuit breakers for branch loads, motor connection terminal blocks and a line filter for the pump VFD - PLC control system and a software programmed with control loops and equipment interlocks - 480/120VAC control transformer to supply the 120VAC powered deviced, a 24DC control transformer, PLC with expansions cards, safety relay, and supplementary fusing and terminal blocks for all field instrumentation - Updated electrical/panel drawings - E-stop safety system - Additional structural support for mounting the new panel - Various new or refurbished PVC piping components (fittings, valved, gauges, etc.) - Note: filter elements are original and have not been replaced/refurbished Includes: Reverse Osmosis System (not refurbished)
Location: On Site at Perry (Hainesport, NJ - USA)
Res-Cem Corp. Double Pass Reverse Osmosis Membrane Filtration Unit
Stock #8447V-08
Used double pass reverse osmosis membrane filtration unit. Manufactured by Res-Cem Corp. 10 gpm flow through capacity. Feed flow: first pass 15.7 gpm, second pass 11.8 gpm. RO permeate: 11.8 gpm first pass, 10.0 gpm second pass.
Location: On Site at Perry (Hainesport, NJ - USA)
Reverse Osmosis Desalination Units Unused with Capacity 50m3/day
Stock #RG2075
Unused Enwa MT-50T SRH Watermaker reverse osmosis desalination unit with capacity 50m3 / 24 hours, made in 2013. Unit is 60Hz and produces drinking water from sea water using reverse osmosis membranes. Quotes issued will be for (1) unit, but (2) units are available. Contact us for more information.
Location: United Kingdom
Sartorius (Germany) Membrane Filter Stainless Steel
Stock #U1930-5
Used stainless steel filter by Sartorius (Germany). Machine is a pre-filtration unit for separating solids from liquids. Continuous work. Unit has 12 filtrating plates with diameter of working surface 260 mm. Total surface of filtration 0.6 square meter. Working pressure of filtration up to 10 bar. Working flow in range from 4000 l/h up to 10000 l/h.
Location: Perry Poland Warehouse
Severn Trent Service Model Cust-Tap-Pure Reverse Osmosis System
Stock #ZG62146
Reconditioned Severn Trent Service reverse osmosis system, rated output 144,000 gpd, model Cust-Tap-Pure 144K RO. Volts 600 HZ 60 PH3. February 2006. New (3) membrane filters, 15 kW feed pump, with control panel.
Location: Northeast USA
US Filter Model MK-35 Reverse Osmosis Filter
Stock #741-03
Used US Filter model MK-35 reverse osmosis filter. 3-membrane. 10 gallons per minute. New 2002.
Location: On Site at Perry (Hainesport, NJ - USA)
Veolia Orion 2000 RO System 2000 Liters/Hour
Stock #ZG63372
Used Veolia model Orion 2000 RO system Capacity 2000 liters/hour 3m X 2m Built 2004 Still installed
Location: N/A
APV Reverse Osmosis System
Stock #21237-02 Sold
Used APV Food Grade UF/RO Rack, Stainless Steel. (8) 316 Stainless steel tubes approximate 4" diameter x 208" long. Each tube is approximately 18.33 square feet. Includes skid of U.S. Filter reverse osmosis cartridges catalog# CDRC4X40B. Mounted on a stainless steel frame.
Location: On Site at Perry (Hainesport, NJ - USA)
Dual Media Sand Filter
Stock #8903V-06 Sold
Used dual media sand filter. 60" diameter X 60" sidewall. Carbon steel construction. 100 psig working pressure. Epoxy lined. 150 gpm service flow, 250 gpm peak, 300 gpm backwash flow, 60 scfm air scour flow, 50 gpm rinse flow. Support bed consists of: 1/2" X 1/4" gravel 3" deep LUS lower head bottom layer; 1/4" X 1/8" gravel 3" deep 2nd layer; 1/8" X 1/16" gravel 3" deep 3rd layer. Filter media is #1 anthracite 15" deep top layer; .45-.55mm filter sand 15" deep bottom layer.
Location: On Site at Perry (Hainesport, NJ - USA)
Membraflow UF-8000 membrane filtration for the fruit juices
Stock #AG61925 Sold
Used Membraflow type UF-8000 membrane ultrafiltration unit. Filtration unit is based on the ceramic membranes, provides direct filtration of the juice (clarification). This unit has been used on the apple juice with the 12-17 BRIX, but can be used as well for the pears, berries, pineapple, orange, as well as vine filtration. Nominal capacity of the unit 8000 liters/hour (enzymed juice, 12-17 BRIX, 52-54*C, DM up to 20 and more). Size parameters: Filtration unit is installed at the 5200 x 2000mm frame, height of the unit is 4200mm. Energy consumption: Filtration more – 68 KW. Chemical cleaning mode – 76-77 KW. Air pressure parameters: 300-600 liters/min with 4-6 bar. Water: When in the Chemical cleaning mode, unit requires water with following parameters - 15m3/hour with 3 bar. Steam: When in the Chemical cleaning mode, unit requires steam with following parameters – 300kg, 125-135*C, 4 bar. Main components of the filtration unit: - Juice feeding part; feeding pump/ mechanical filter/ water sensor/ pneumatic valves/ heat exchanger/ sensors for the pressure, temperature, consumption. - Filtration part; (6) filtration modules type 19M198-R/1200 with ceramic membranes in each module. Each module has 10.8m2 of ceramic membranes, size of the pores 50 nanometers/ Recirculation pump/ Heat exchanger/ Temperature sensor/ Pressure sensor/ Induction type consumption sensor. - Piping of the unit; various pipes/ consumption sensors/ pneumatic valves/ membrane valves. - Controls and electricity; Local control panel/ processor/ convertors/ relay and switches/ analog and digital to analog signal conversion cards. Chemical washing part; 1500ltr tank/ tanks for concentrated solutions of alkali and nitric acid/ membrane pump/ pneumatic valve.
Location: Europe
Progress (Ukraine) Model PKG-10 Vertical Candle Filter
Stock #KG58670 Sold
Reportedly unused vertical candle filter type PKG-10. Made of titanium with ceramic filtering elements.has bolted dished top and Conical welded bottom. Filtration surface 10 square meter; volume of filter body 1350 liters. Working pressure 6 bar with temperature 80°C. Shipping dimension: 1530mm long X 1250mm wide X 2900mm high; approximate weight 890 kg. Designed for filtration of low level concentrated suspension.
Location: RUSSIA
Water Treatment Plant made by Jurby Watertech, Unused, Never Installed
Stock #KG61949 Sold
Reportedly unused Jurby Watertech model AquaHard water treatment plant. Plant includes the following: Aeration unit, Sodium hypochlorite dosing station, Filtration unit, Pump station, (2) Sorption plant, Antiscalant dosing station, Nanofiltration plant consisting of (2) systems rated 68 m3/hour each, Membrane Washing unit, Softening plant, CO2 degasifier rated 160 m3/h, Control unit based on Simatic S7 controller and Siemens control panel. Reportedly new in 2005, never installed or operated, partially in crates, big parts stored into yard. Part of the equipment is missing - revision is required. Equipment list by additional request
Location: EUROPE