75mm Werner & Pfleiderer Conical Counter-Rotating Twin Screw Extruder
Код #7227V
Used Werner & Pfleiderer conical counter-rotating twin screw extruder. Type # CRP 104, serial# 180115, project # 84 3220. Screws are 102.2 mm at feed tapering to 75.5 mm at discharge. Approximately 17:1 L/D ratio (screws are 1569 mm long). Unit is powered by a 7.5 HP Reliance DC motor, 1750/2300 rpm and has an Allen Bradley programmable controller. Screw shaft speed 6-60 rpm. 41" centerline height, electric heat, liquid cooled, with temperature control panel. Machine was originally designed and built for continuous polymerization and extrusion of nylon type strand.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
90mm Krauss Maffei Counter-Rotating Twin Screw Extruder
Код #ZP63254
Used 90mm Krauss Maffei model KMD90 counter-rotating twin screw extruder. New 1994. Has electrically heated oil cooled barrel, includes temperature control panel, driven by 40HP hp DC motor with SCR control.
Місцезнаходження: South USA
У кошик
Детальніше
30mm Leistritz Counter-Rotating Twin Screw Extruder
Код #21464V-2
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled and includes operator control panel.
Місцезнаходження: On Site at Perry (Hainesport, NJ - USA)
У кошик
Детальніше
78mm American Maplan Counter-Rotating Twin Screw Extruder
Код #ZP63363-2
Used 72mm Cincinnati Milacron Argos counter-rotating twin screw extruder model Argos72R-280. New 2007. Has electrically heated air cooled barrel with (4) blowers for air cooling. Includes vented barrel with vacuum system, powder feeder with hopper magnet, and temperature control panel with EX XP touch screen. Includes 51kw Siemens motor to Eisenbeiss gear reducer. Overal dimensions 17' long x 5' wide.
Місцезнаходження: Canada
У кошик
Детальніше
78mm American Maplan Counter-Rotating Twin Screw Extruder
Код #ZP63363-1
Used 78mm American Maplan counter-rotating twin screw extruder, new 2015. Has (4) blowers for air cooling on the barrel, oil heated screws, includes hopper with power feeder and hopper magnet. Driven by 56kw motor through Eisenbeiss reducer. Includes temperature control panel with (9) zones. Overall dimensions 15' long x 5' wide.
Місцезнаходження: Canada
У кошик
Детальніше
4" 27:1 Mdl. Argos 112P-65-20-1150-UL Parallel Counter Rotating Twin Screw Extruder
Код #L1567-03
Used Cincinnati model Argos 112P-65-20-1150-UL parallel counter rotating twin screw plastic extruder. Screw length approximately 3020mm long x 112mm diameter screw, L/D ration of 27:1. Barrel is electrically heated and air cooled in 4 zones with air blowers air blowers with approximately 0.45kw motors. Unit is driven by 65kw, 420volt, 2000rpm 3ph, 50/60 hz motor through gearbox with 96:188 reduction ration. Unit has top entry Plasticolor 2200 vibratory feeder with horizontal screw feeder driven by 1.1kw motor. Unit includes local controls.
Місцезнаходження: Newton Aycliffe, UK
У кошик
Детальніше
3" 20:1 Conical Counter Rotating Twin Screw Extruder
Код #L1567-02
Used Cincinnati model CMT80L-APC conical counter rotating twin screw plastic extruder. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adaptor plate that reduces the barrel exit down to 65mm diameter. Barrel is electrically heated and air cooled in 4 zones with air blowers with 0.45kw motors. Unit is driven by 49kw, 415volt, 50hz main motor and gearbox with output 25.5rpm screw speed. Unit has top entry Plasticolor 2200 vibratory feeder with horizontal screw feeder driven by approximately 0.55kw motor. Unit has local controls.
Місцезнаходження: Newton Aycliffe, UK
У кошик
Детальніше
55MM Mdl. CM55 Counter Rotating Twin Screw Extruder
Код #L1567-01
Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with 0.20kw motors. Unit is driven by 37 to 49.5kw, 350 to 493 volt, 50.8 to 74.2 hz, 1500 to 2200rpm electric motor with gearbox. Unit has top entry Plasticolor 2500 vibratory feeder with horizontal screw feeder driven by 0.55kw. Unit includes touchscreen controls.
Місцезнаходження: Newton Aycliffe, UK
У кошик
Детальніше