Plant - Agricultural Chemicals(2)
Plant - Air Separation, Oxygen, Nitrogen, Hydrogen(19)
Plant - Biorefining(8)
Plant - Brewery, Distillery, Alcohol(20)
Plant - Dairy Milk Ice Cream(3)
Plant - Edible Oil(13)
Plant - Foods(42)
Plant - Industrial Inorganic Chemicals(5)
Plant - Industrial Organic Chemicals(4)
Plant - Mineral Processing, Mining, Cement(12)
Plant - Miscellaneous(25)
Plant - Petrochemical, Refinery & Asphalt(4)
Plant - Pharmaceutical(1)
Plant - Plastic Materials, Synthetic Resins and Rubber, Manmade Fibers(5)
Plant - Plastic Rubber(2)
Banbury Type Mixers(9)
Continuous Mixers(10)
Dispersion Mixers Europe(56)
Double Arm Mixers(36)
High Intensity Mixers(53)
Intensive Pharma Mixers(23)
Miscellaneous Powder Mixers(7)
Mixer Miscellaneous(23)
Mixer Universal(29)
Nauta Mixers(53)
Planetary Mixers(82)
Plowshare Mixers(50)
Ribbon Mixers(43)
Ribbon Mixers Europe(46)
Tumbling Mixers (79)
Atmospheric Tray Dryers(7)
Batch Fluid Bed Dryers(43)
Conical Rotary Vacuum Dryers(20)
Continuous Fluid Bed Dryers(12)
Conveyor Dryer(4)
Conveyor Dryer ( Sandvik Type )(2)
Double Drum Dryers(1)
Flash Dryer (3)
Other Dryers(1)
Pan Dryers(10)
Rotadisc Dryer(3)
Rotary Hot Air Dryers(10)
Rotary Kiln Dryer(2)
Rotary Multi-Pass Dryers (Heil Type)(1)
Rotary Steam Tube Dryer (4)
Rotary Tray Dryers(3)
Cartridge Filters(56)
Filter Parts(1)
Nutsche Filters(17)
Osmosis and Membrane Filters(15)
Plate & Frame Filter Presses(46)
Plate & Frame Filter Presses Europe(26)
Pressure Leaf Filters (1-199 SQFT)(20)
Pressure Leaf Filters (200 - SQFT & Up)(9)
Pressure Leaf Filters, Europe(16)
Rotary Vacuum Filters - Drum(5)
Rotary Vacuum Filters - Drum, Europe(7)
Rotary Vacuum Flters, Disc(1)
Vacuum Belt Filters(6)
Bins and IBCs(169)
Glass Lined Tanks(55)
Glass Lined Tanks, Europe(14)
Pipe Glass(2)
Stainless Steel Tanks in Europe 10,000-19,999 Litres(36)
Stainless Steel Tanks in Europe 5,000-9,999 Litres(58)
Stainless Steel Tanks in Europe Less than 5,000 Litres(358)
Stainless Steel Tanks in Europe Over 20,000 Litres(31)
Stainless Steel Tanks Less than 1,000 Gallons(145)
Stainless Steel Tanks, 10,000 to 19,999 Gallons(11)
Stainless Steel Tanks, 1000 to 1999 Gallons(34)
Stainless Steel Tanks, 20,000 Gallons and Up(3)
Stainless Steel Tanks, 2000 to 3999 Gallons(39)
Stainless Steel Tanks, 4000 to 5999 Gallons(20)
Stainless Steel Tanks, 6000 to 9999 Gallons(14)
Steel Tanks in Europe(3)
Steel Tanks Less than 10,000 Gallons(10)
Steel Tanks, 10,000 Gal. & Up(2)
Carbon Steel Reactors(1)
Glass Lined Agitators(197)
Glass Lined Baffles(179)
Glass Lined Covers(179)
Glass Lined Drives(94)
Glass Lined Reactor Parts(38)
Glass Lined Reactors(75)
Glass Lined Reactors Europe 5,000 Litres and Up(12)
Glass Lined Reactors, Europe Less than 5,000 Litres(31)
Reactor Parts - Agitator Drives(105)
Reactor Parts - Agitators(5)
Stainless Steel Reactors - Europe 5,000-19,999 Litres(13)
Stainless Steel Reactors - Europe Less than 5000 Litres(67)
Stainless Steel Reactors - Europe More than 20000 Litres(3)
Stainless Steel Reactors 2000 Gallons and Up(3)
Stainless Steel Reactors 500 to 2000 Gallons(13)
Stainless Steel Reactors Less than 500 Gallons(73)
Rectangular Screens(38)
Rotary Screens(24)
Round Screens(38)
Round Screens - Europe(7)
Screen Dewatering(1)
1 1/2" Extruders(6)
10" Extruders(1)
2 1/2" Extruders(7)
3 1/2" Extruders(3)
4 1/2" Extruders(1)
6" Extruders(1)
8" Extruders(1)
Co-Rotating Twin Screw Extruders(14)
Counter-Rotating Twin Screw Extruders(9)
Extruder Screws(11)
Extruder Temperature Panels(10)
Extrusion Line Feeders(12)
Pug Mills - Vacuum Extruder(1)
Rubber Extruders(3)
Cutter Film Densifier(4)
Cutter Guillotine(2)
Cutters/Shredders(15)
Granulator Parts(12)
Pelletizer Parts(1)
Strand Pelletizers(19)
Underwater Pelletizers(10)
Butter or Margarine Machinery(7)
Cooker - Cooler/Bottle Conveyor Type(1)
Cooker, Rendering Type(3)
Fishmeal(5)
Food Extruders(10)
Hollow Screw Cooker Or Cooler(10)
Meat Equipment(8)
Miscellaneous Equipment for Food Processing(34)
Oils and Fats Processing Equipment(22)
Pasteurizers(4)
Rendering Equipment(12)
Vegetable Cutters(3)
Harvestor(1)
Sugar and Pulp Dryers(4)
Sugar Beet Diffuser(4)
Sugar Beet Preparation(7)
Sugar Beet Slicer(4)
Sugar Cane Factory(9)
Sugar Cane Preparation(21)
Sugar Centrifuges(21)
Sugar Equipment, Miscellaneous(16)
Sugar Evaporator, Pan, Crystallizer(20)
Sugar Filters(7)
Sugar Pulp Dewatering Press (16)
Bottle Cleaner(2)
Checkweighers(13)
Cottoner(3)
Feeder, Miscellaneous(32)
Feeder, Vibrating Pan(8)
Filler Form Fill & Seal(24)
Filler Form Fill & Seal Liquids(10)
Filler Liquid Gravity(3)
Filler Liquid High Speed(3)
Filler Liquid Pressure Low Speed(7)
Filler Paste - Piston - Pocket(21)
Filler Powder Bag & Box(22)
Filler Powder Capsule - Ampule(9)
Filler Tablet & Counter(5)
Filler Tube(6)
Your Cart is Empty.
Home » Food and Edible Oils Processing » Oils and Fats Processing Equipment
Stock #RG9201
Used Alfa Laval MX 90 Dynamic mixer. Capacity 170 litre. Maximum pressure 10 bar at 100° C. 11 kW 950 rpm motor.
Location: ITALY
Stock #ZG62041
Used Anderson 55 Duo expeller with 14" conditioner. Equipped with 75 HP motor main drive. 15 HP gear head feeder and conditioner drive motor.
Location: EU
Stock #21407-03
Used Anderson 55 Duo expeller press. Equipped with 75 hp main drive, 15 hp gearhead vertical motor. Last used in rendering plant.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21407-02
Used Anderson 55 Duo expeller press. Equipped with 75 hp main drive, 15 hp gearhead vertical motor. Last used in rendering plant.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21407-01
Used Anderson 55 Duo expeller press. Equipped with 75 hp main drive, 15 hp gearhead vertical motor. Last used in rendering plant.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZG56397
Used/rebuilt Anderson cooker/dryer. 36" diameter X 12' long. Carbon steel construction. With new 9" X 5' long feeder with AC variable speed drive, 10 HP gear head motor, and roller chain drive, 3/60/230-460 volts.
Location: South USA
Stock #V21615-01
Used animal feed protein feed line. Consisting of the following: UAS 350 hp hammermill Model 112X110D UAS 150 hp hammermill Wenger (UAS) stainless steel feeder conditioner Anderson 12" expander, 350 hp with cutter and pelletizer head Fulton Model TSCS60 steam boiler Geelen counter flow Dryer-Cooler Type VD28X38J, 3-deck stainless steel, equipped with Maxon burner. Karl Schnell 225mm emulsifier Grinder, stainless steel Dust collectors Control Panel Plant was design to process grains and animal byproducts for use as Chicken feed protein.
Location: South USA
Stock #20231-01
Used carbon steel expander/dryer. 12" diameter X 12' long. Includes 40" diameter drive pulley on steel stand. Will require 300-350 HP motor. (not included)
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZG63620
Used TNL Tecnal expander. Model No: EXP-300 Equipped with 250 hp motor, direct steam through special scraper bolts with steam injection channels. Has Auto-Run hydraulic cone at discharge. Can be used on materials with low oil content, soybean flakes, rice bran, high oil content, sunflower seeds, rape seed, corn germ. Cake after presses.
Location: East Coast USA
Stock #ZG63749
(2) Used Roskamp Model SP2800-62 Flakers, 28" x 62" 2 pairs of rolls Equipped with 150 hp motor, hydraulic pump
Location: Mexico
Stock #ZG62899
Used French Oil Mill Company 24X52 Flaking mills a. Corrugated Vibratory feeder. b. Hydraulic power pack. c. Conventional drive with 125 HP Motor. d. Includes New CC-210 hex-belts. e. Does not include power grip/ timing belt. Had been running soybeans. Estimated capacity of 225 – 250 TPD depending on the flake thickness.
Location: N/A
Stock #V21615-06
Used UAS carbon steel hammermill. Driven by 150 hp motor. Includes dust collector.
Location: South USA
Stock #V21615-05
Used UAS Model UFSP112X110D carbon steel hammermill. Driven by a 350 hp motor. Includes dust collector.
Location: South USA
Stock #ZS62706
Used Kahl Counterflow Cooler Model VK2800x3800KL including following: - Rotary inlet Feeder with Motor. - Cooling section with inspection Ports. - Unit equipped with (2) Bin level indicators. - Discharge grid system with Drive. - Hydraulic Power Unit with tank. - Discharge Hopper. - Legs support frame. - 75 HP Cooler Fan. No cyclon included.
Location: CN
Stock #ZG62532
Used Krupp model EP-07 screw press for oilseeds. Includes chopper with feed screw. Main drive is a 150 HP motor, 3 phase, 60 cycle, 230/480 volts, V-belt drive with pulley. Screw shaft speed 32 rpm. Presently set up for full press. Last used on extruded soybeans. Rated full press 75-80 tons per day. If used as a pre-press on canola sunflower or other high oil content seeds, the capacity will be confirmed upon request, leaving 18-22% R.O. In order to achieve higher capacity, the main drive shaft speed will need to be increased to 60-65 rpm.
Location: South USA
Stock #HG62337
Used Reinartz model AP 15 single screw press for cold-pressing oil seeds. Approximate processing capacity for rapeseed 1000 kg/hour for other oil seeds approx. 750 kg/hour.
Location: CZ
Stock #21648
Used Stainless Steel Roskamp 2-Roll Flaking Mill Mfr: Roskamp Model: 55X20FT Machine type: RH1800-36 Serial #: 43833 Year: 1995 Includes (2) internal rolls Additional information: Hydraulic roll adjustment. Magnet for tramp iron. Approximately 40 hp belt drive.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #X20836-02
Used Roskamp model TRC936 carbon steel flaker. 9" diameter X 36" wide rolls. Equipped with 10 HP motor. A single pair cracking mill.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #X20836-01
Used Roskamp model TRC936 carbon steel flaker. 9" diameter X 36" wide rolls. Equipped with 10 HP motor. A single pair cracking Mill.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #ZG63679
Unused Insta-Pro Model 2500 Soybean Extruder Mfr: Insta-Pro Model: 2500 HP: 125 hp, 190/380-415 volts, 50 cyc, 3 phase With feeder
Location: Mexico
Stock #U1744-2
Used Westfalia model ZA80-66-905 mixing pump. Maximum density of product is 2 kg/liter. Rotor has rotation speed 3000 rpm and is driven by 11 kW, 2910 rpm, 380 V, 50 hz, Ex proof electric motor (Exd3nG5). Unit was used as feeding pump before liquid/liquid separator centrifuge. Technical documentation available.
Location: Perry Poland Warehouse
Stock #U1744-3
Used Westfalia model ZA80-66-905 mixing pump. Maximum density of product is 2 kg/liter. Rotor has rotation speed 3000 rpm and is driven by 11 kW, 2910 rpm, 380 V, 50 hz, Ex proof electric motor (Exd3nG5). Unit was used as feeding pump before liquid/liquid separator centrifuge. Technical documentation available.
Location: Perry Poland Warehouse
Stock #21407-04 Sold
Used Anderson 55 Duo expeller press. Equipped with 75 hp main drive, 15 hp gearhead vertical motor. Last used in rendering plant.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #21407-05 Sold
Used Anderson 55 Duo expeller press. Equipped with 75 hp main drive, 15 hp gearhead vertical motor. Last used in rendering plant.
Location: On Site at Perry (Hainesport, NJ - USA)
Stock #V21615 Sold
Used animal feed protein feed line. Consisting of the following: UAS 350 hp hammermill Model 112X110D UAS 150 hp hammermill Wenger (UAS) stainless steel feeder conditioner Anderson 12" expander, 350 hp with cutter and pelletizer head Fulton Model TSCS60 steam boiler Geelen counter flow Dryer-Cooler Type VD28X38J, 3-deck stainless steel, equipped with Maxon burner. Karl Schnell 225mm emulsifier Grinder, stainless steel Dust collectors Control Panel Plant was design to process grains and animal byproducts for use as Chicken feed protein.
Location: South USA
Stock #V21615-02 Sold
Used Anderson alloy steel expander-extruder-cooker. 12" diameter screw barrel, steam injected. V-belt driven, 450 hp 3/60/460 volt motor. Includes die plates and cutter head.
Location: South USA
Stock #ZG63546 Sold
Used Roskamp Type RH1800-36 flaking mill, roller mill series. Hydraulic roll adjustment. Magnet for tramp iron. Approximately 40 hp belt drive.
Location: Northeast USA
Stock #ZG62901 Sold
Used Roskamp 2800 Flaking Mill Model SP-2800X62 a. 28” Diameter X 62” Long, Chilled, Cast Iron Rolls b. Mill Frame Constructed of Ship Channel and High-Strength c. Self-Aligning, Spherical Roller Bearings d. Heavy Duty Power Grip Drive e. With Differential Drive f. Accumulator Roll Protection g. Hydraulic Roll Tension with Positive Stops h. Adjustable Motor Base i. Adjustable Roll Scraper Assemblies j. Central Greasing System k. One Hydraulic Pump with Control l. Corrugated Roll Feeder m. 150HP/3PH/50HZ/220/380/440V/1500RPM/TEFC/Motor
Location: TX
Stock #ZG62900 Sold
Used Roskamp 2800 Flaking Mill Model SP-2800X62 a. 28” Diameter X 62” Long, Chilled, Cast Iron Rolls b. Mill Frame Constructed of Ship Channel and High-Strength c. Self-Aligning, Spherical Roller Bearings d. Heavy Duty Power Grip Drive e. With Differential Drive f. Accumulator Roll Protection g. Hydraulic Roll Tension with Positive Stops h. Adjustable Motor Base i. Adjustable Roll Scraper Assemblies j. Central Greasing System k. One Hydraulic Pump with Control l. Corrugated Roll Feeder m. 150HP/3PH/50HZ/220/380/440V/1500RPM/TEFC/Motor
Location: TX
Stock #V21615-03 Sold
Used Geelen Model VD28X38XKM-KA-VK28X38KM MKII, stainless steel, 3-deck dryer-cooler. Includes cyclone, dust collector, 60 hp blower fan. Maxon Model Oven Pak type EB-6. 2100 kw natural gas burner. Duct work. Control Panel.
Location: South USA
Stock #ZG63513 Sold
Used Rosedown 600 Series Sterling screw press 9" screw feeder Vertical force down shaft 500 HP, 3 phase, 60 cycle, 230/480 volts main motor Extra new gear box, horizontal shaft, and extra worms and collars
Location: South USA
Stock #AG60926-1 Sold
Used seed separator Schule model TNZ-0E. Designed to separate the particles of the same shape but with different densities. Last was used at the vegetable oil extraction plant on the sunflower seeds separation from the particles with the capacity 2.5 tons\hour (sunflower seed). Set includes - platform / adjustable table / drive 3kW / control panel / also includes some spare parts like driving wheel, roller.
Location: N/A
Stock #RG9932 Sold
Used Timatic FC-100, extractor of natural oils, herbs, essences, fragrances and other natural substances. Made in 2008 with capacity of 100 litres. Equipment was used to extract essential oils in an experimental project so has not had a lot of use. (2) are available, quotes will be issued for (1) unit.
Location: Europe
Stock #AS60997 Sold
Unused Harburg Freudenberger KRUPP model EP16-3 screw press for oil seeds processing. Press was designed for secondary pressing with reported output up to 75 t/h on sunflower seeds. Reported that press can be readjust and used for the primary pressing as well. Electrical parameters; 380V, 50Hz, 250 KW (335 HP). Cooling water consumption 1.5 m3/h. Approximate size parameters; height 1700 mm, length 6000 mm, width 1500 mm. Weight empty 13,000 kg, loaded 16,000 kg. Reported residual oil in cake 5-8%. This press was purchased in 2011, installed and never used. Harburg Freudenberger
Location: Europe
Stock #V21615-04 Sold
Used UAS/Wenger stainless steel paddle horizontal shaft pre-conditioner / conditioning drum. Approximately 36" diameter x 12' long. Equipped with top and bottom steam injection. Drive motor.
Location: South USA