14" Diameter French Oil Dewatering Press
Stock #ZP59579
Used 14" diameter French Oil dewatering press previously used for LDPE pulped milk carton stock dewatering. 14" O.D. Screw, 110" long. New approximately 1978. Belt driven by a 400 HP AC motor supplying 125 rpm screw speed. Includes an N-series gearbox rated at 1000 HP. Gearbox rebuilt in 1997. Last in operation in 2004. Some spare parts available.
Location: South USA
Add to Cart
View Details
250 HP Hydraulic Drive Spare Motor For Dewatering Press
Stock #21532-101A
Used Siemens Max Duty 250 hp motor. 226 amps, 1785 RPM, 4491SC frame, 575 volt,
3 phase, 60 hz.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Andritz-Dupps Model 3620 Dewatering Screw Press
Stock #20010-1
Used Andritz-Dupps model 3620 dewatering screw press with Falk gear box, 300 HP motor, control panel. Production 205 air dried metric tons per Day or 184 bone dried metric tons per day. Inlet consistency 4.0% BD, discharge consistency 30% BD. Temperature 30-50C, freeness 120-180 ml CSF, PH 7-9, filtrate 2300 ppm (suspended fiber portion only-on filter paper) flow index: production bone dried metric tons per day/consistency percentage BD/flow LPM, example: 184.5/30/428. Manufacturer Andritz/Dupps.
Location: Northeast USA
Add to Cart
View Details
Andritz-Dupps model 3628 dewatering screw press
Stock #ZW63637
Used Andritz-Dupps model 3628 dewatering screw press. This single screw type dewatering press is made of AISI 304L stainless steel and designed to remove liquid from the waste sludge at the paper mill. Unit is equipped with Falk gear box and 40 HP motor. Screw Diameter 36 inch (914 mm), Length 35 feet (10,67 m), weight 19,000 lbs (8618 kg). Overall size parameters: Length 43 feet (13,1 m), Width 9 feet (2.75 m), Height 8 feet (2.5 m), Dry weight 68,000 lbs (30,844 kg), operational weight 77,000 lbs (34,926 kg). The approximate capacity is about 180-220 TPD. Inlet consistency 4.0% BD, discharge consistency 30% BD (depends on the product). More information is available on request.
Location: USA
Add to Cart
View Details
Black-Clawson Single Screw Hydradenser Extractor
Stock #M2916-045
Used Black-Clawson single screw hydradenser extractor. (1) 16" diameter X 6' long screw. With a Falk reducer.
Location: Northeast USA
Add to Cart
View Details
Black-Clawson Single Screw Hydradenser Extractor
Stock #M2916-037
Used Black-Clawson single screw hydradenser extractor. 16" diameter X 6' long. 20 HP V-belt drive. 3/60/230-460 volt, 1775 rpm motor. Connected to a Falk reducer, 25.7:1 ratio.
Location: Northeast USA
Add to Cart
View Details
Erwepa Inclined Screw Thickener 9"
Stock #7704-10
Used Erwepa 9" inclined screw thickener. Stainless steel. With motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
FKC Type SHX-1000 Screw Type Sludge Dewatering Press
Stock #781-1362
Used FKC type SHX-1000 sludge dewatering screw press. Serial # M-1340 new 1989-4. 47" X 37" feed opening, 9 screen sections with 3/16" holes with last 2 screens having an additional 1" holes screen on top. Stainless screw with steam Rotary joint. Spring loaded back pressure, 3 chain sprocket, 20 HP Siemens 230/460 volt, 1170 rpm drive motor connected to a Beier varator reducer model 20 VK speed range 27-1.08NPUT 15 kW 1200 rpm which drives a Sumitomo Cyclo drive model H-939B ratio 731:1.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
FKC Type SHX-1000 Screw Type Sludge Dewatering Press
Stock #781-1363
Used FKC type SHX-1000 sludge dewatering screw press. Serial # M-1340 new 1989-4. 47" X 37" feed opening, 9 screen sections with 3/16" holes with last 2 screens having an additional 1" holes screen on top. Stainless screw with steam Rotary joint. Spring loaded back pressure, 3 chain sprocket, 20 HP Siemens 230/460 volt, 1170 rpm drive motor connected to a Beier varator reducer model 20 VK speed range 27-1.08NPUT 15 kW 1200 rpm which drives a Sumitomo Cyclo drive model H-939B ratio 731:1. Also includes 24" X 12' long stainless steel thickener on steel frame with 3 HP motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Hydraulic Screw Press, Mdl. CPS-415
Stock #21729-1
Used Perrin Model CPS-415 Hydraulic Screw Press
10" diameter screw
Has 15 hp hydraulic package
460V/3PH/60CYC, 25 FLA
Has controls
Year 1992
Serial #: PSP10-5148
Location: Midwest USA
Add to Cart
View Details
Hymac Thune SL70SL Housing
Stock #21532-953
Used Hymac Thune model SL70SL housing. Serial # 896041 stainless steel frame and base. 16 air operated back pressure flappers, stainless steel discharge housing, stainless steel top cover, stainless steel feed housing with bottom screen.
Location: Canada
Add to Cart
View Details
Lamort-Baker M-16 Inclined Screw Thickener 16" O.D. x 86" Long
Stock #7704-06
Used Lamort-Baker M-16, 16" inclined screw thickener. Has 16" OD X 86" length. 14" X 25" feed and discharge opening. Stainless steel contact parts. With 18.5kW, 380 volt, 50HZ motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Pulp Press Stord Press MS64
Rice Barton Triple Screw Stainless Steel Water Extractor Thickener
Stock #M3938-001
Used Rice Barton triple screw stainless steel water extractor/thickener. 7.5 HP, 3/60. 575 volt Toshiba motor. Three (3) 9" screws. No top cover.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Rietz Model RSP-16-K2 Continuous Screw Dewatering Press
Stock #20597-03
Used Rietz model RSP-16-K2 horizontal continuous screw dewatering press. 16" diameter screw. Stainless steel contact parts. Equipped with 3 HP Cone motor.
Requires main drive motor and gearbox. Mounted on I-beam steel base
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Rietz Model RSP-16-K2 Screw Press
Stock #UG6198
Used stainless steel screw press for dewatering by Rietz S-Press model RSP-16-K2. Press is equipped with stainless steel screw with diameter 400 mm x length 2420 mm. Screw is working with adjustable speed. Shipping dimensions of press: W 1000 mm x L 5750 mm x H 1600 mm. Hopper and wedge wire screens not included.
Click on the link below to see a video of the machine running.
Location: PL
Add to Cart
View Details
Stord Model BS41FK Twin Screw Press
Stock #ZG59561
Used Stord model BS41FK twin screw press. 12" diameter X 10' long screws. Carbon steel construction. With heavy duty main cage and back up screen. Driven by 40 HP drive through reducer. Screw rotate counter current.
Location: West Coast USA
Add to Cart
View Details
Thune Kvaerner SP32L Screw Press
Stock #20624-1
Used Thune Kvaerner SP32L screw press for pulp dewatering. Stainless steel covers with 3 window design, no back pressure paddles.
Serial # NF8105101/238
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Thune SP70SL Dewatering Screw Press
Stock #21532-101
Used Kvaerner Thune SP70SL dewatering screw press, Serial No. 89-6037. Rated at 300 BDMT/D. 4 inspection windows, stainless steel base and housing, 16 air operated back pressure valves, internal screw and screens, with Hagglunds Denison hydraulic drive type MA283N011 with max. pressure 350 bars and max. speed 42 RPM, 250 hp Siemens Type RGZ-VF2-575 V-motor.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
Used Stord RS64S Beet Pulp Press
Vincent Model CP-4 Compact Continuous Dewatering Press
Stock #ZG63714
Used Vincent Model CP-4 Compact Continuous Dewatering Press
150#/hour to 500#/hour capacity (0.5 tpd to 1 tpd)
1.2' X 4' long X 2' high
304 stainless steel
Graduated pitch
Interrupted flight screw
Final pressing controlled by discharge cone
1.5 HP motor
230/460 volt, 3/60 , include VFD
Built 2020
Location: South USA
Add to Cart
View Details
Vincent VP-30 Screw Press
Stock #875-113386
Used stainless steel screw press.
Manufactured by Vincent
Model VP-30
7'3" wide X 6'7" high x 25' long
30" screw with wedge wire
150 HP motor, Sumitomo PHD 9105 P4 gear box 147:1 ratio
Bearing on each side of screw
2 air cylinder Parler 14.00JB2AUS14A-12.00
Built 2015
Location: South USA
Add to Cart
View Details
150 MM Diameter Stainless Steel Dewatering Screw Press
Stock #U2368-1 Sold
Used horizontal stainless steel dewatering screw press. Press has stainless steel screw with diameter 150 mm. Working lenght of screen 440 mm. Top feeding hopper has inlet dimensions 255 mm x 130 mm. Discharge - liquids through bottom outlet 200 mm x 100 mm, solids - through front outlet with diameter 155 mm. Screw is driven by gearbox and el motor 2.2 kW, 1465 rpm, 400/690 V, 50 hz. Press is mounted on mobile stainless steel frame.
Location: Perry Poland Warehouse
View Details
Dewatering screw press Thune model SP23 capacity 20 TPD
Stock #ZW63524 Sold
Used single screw dewatering press Thune SP23 model, nominal capacity up to 20 TPD. Designed for paper fiber, board and pulp. Inlet consistency is adjusted from 3.5 to 5% and outlet consistency from 35 to 0.5%. Stock temperature is 40 to 50 degrees Celsius. The unit is equipped with a coupling Hateco TA 120. The reported condition of the unit is good. The unit is equipped with a gearbox Cyclo HT 88 U=29:1 and is missing a 20 KW electric motor.
Size parameters (metric): 1170 x 3300 x 850, weight 1670 kg.
Size parameters Imperial: 46'' x 130'' x 34'', weight 3.670 lbs.
Contact us for more information.
Location: Europe
View Details
Dewatering screw press Thune model SP23 capacity 20 TPD
Stock #ZW63523 Sold
Used single screw dewatering press Thune model SP23 with the nominal capacity up to 20 TPD. Designed to operate on a paper fiber, board and pulp. Inlet consistency is between 3,5 and 5%, has regulated outlet consistency of between 35% and 0,5%. Temperature of the stock 40-50°С. Unit is equipped with the coupling Hateco TA 120. Reported equipment is in a good condition. Unit is equipped with the gearbox Cyclo HT 88 U=29:1, a 20 KW electrical motor is missing.
Size parameters metric: 1170 x 3300 x 850, weight is 1670 kg.
Size parameters imperial: 46'' x 130'' x 34'', weight is 3.670 Lb.
More information is available on request.
Location: Europe
View Details
Gulf Machinery Company Carbon Steel Vertical Screw Press
Stock #690-051 Sold
Used Gulf Machinery Company carbon steel vertical screw press. 30" diameter. Equipped with 30 HP hydraulic drive.
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
Hägglunds Type MA2OOCN0600 Hydraulic Drive
Stock #20648-3SD Sold
Used Hägglunds Type MA2OOCN0600 hydraulic drive. Serial #51202825,
displacement 12575. Maximum pressure 350 bar rated at speeds of 45 R/M
torque 200 NM/bar
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
Hagglunds Type TCA10000 Gear Drive
Stock #15999-863 Sold
Used Hagglunds gear drive. Type TCA10000 individual no 2781484-801-9, VID.no K10P\00311 weigh 310 kg. Maximum pressure 350 bar. Made in Sweden.
Location: On Site at Perry (Hainesport, NJ - USA)
View Details
Salzgitter HP1802 Sugar Pulp Dewatering Presses
Stock #AS60922-01 Sold
Fully refurbished sugar pulp dewatering presses Salzgitter HP1802. Capacity 1000 TPD
More information on request
Location: N/A
View Details
Stord Bartz MS49 Twin Screw Press
Stock #RG9606 Sold
Used Stord Bartz MS49 twin screw press. Equipped with drive motor.
Location: Europe
View Details
Thune Mdl SP 70SL Hi-Cap Dewatering Screw Press
Stock #ZW63328 Sold
Used Thune Model SP 70SL Hi-Cap dewatering screw press. Year 2000. With Hagglunds drive.
Location: Northeast USA
View Details
Vincent CP-4 Continuous Screw Press
Stock #ZG63405 Sold
Used Vincent CP-4 screw press with stand
- Model CP-4-VT
- Manufacturer: Vincent Corporation, Tampa Florida
- Continuous dewatering press. Graduated pitch, interrupted flight screw. Final pressing is
controlled by a discharge cone, actuated by an air cylinder for easy adjustment of moisture content.
-Vapor tite sanitary stainless steel contacts
- Factory listed capacity 0.5-1 tpd dry solids or 150-500 lbs/hour
- 16" L X 9" W inlet opening (floor to inlet 54")
- 2" TriClamp liquid discharge fitting (floor to outlet 28")
- Leeson 1.5 HP XP rated motor for hazardous locations
- Electrical 230/460 volt, 3 phase, 60 Hz, 4.6/2.3 amps,
- UL Listed #S C76629145
- (4) locking casters for portability
- Overall dimensions 82" L x 28" W x 54" H @ 500 lbs.
Location: Northeast USA
View Details
Vincent CP-4VT Compact Screw Press
Stock #ZG63650 Sold
Used Vincent Model CP-4VT Compact Screw Press
Vapor locked style for encapsulating volatile fumes
All stainless steel construction
4" diameter screw
9" wide x 15" long open top feed section
25" long pressing section
Set up with a .19" wedge wire screen
.006-.008" slot width
Resistor bar and an air-actuated back pressure discharge cone
Liquid discharge pan
Open bottom pumice discharge
Pressing area is fully enclosed and has two inspection windows with wipers
Leeson 1.5hp drive motor, 230/400/3/60 with a Nord gearhead reducer with an 89:1 ratio
Includes a KB Genesis A/C inverter speed controller
Unit is in like new condition, as is
Built 2019
Serial number 19-87-H
Location: West Coast USA
View Details
Vincent Model CP-6VT Dewatering Screw Press
Stock #ZG63605 Sold
Used Vincent model CP-6VT dewatering screw press
Full vapor tight press
350#/hour on dry basis (4 tons/day)
Can do 98% on oleoresin recovery and 75-80% ethanol recovery
5 HP, 480 volt motor, 3/60 with VFD expolsion proof
Food-grade contact surfaces
6" diameter screw with (5) stages of compression
Comes with stand
Bought in 2019 used less than 1 year
Location: Midwest USA
View Details
Vincent VP-30 Screw Press
Stock #875-113387 Sold
Used stainless steel screw press.
Manufactured by Vincent
Model VP-30
7'3" wide X 6'7" high x 25' long
30" screw with wedge wire
150 HP motor, Sumitomo PHD 9105 P4 gear box 147:1 ratio
Bearing on each side of screw
2 air cylinder Parler 14.00JB2AUS14A-12.00
Built 2015
Location: South USA
View Details